Product Overview
The Crivnhar Charger Holder is designed to securely mount your Makita battery chargers to a wall, bench, garage, workshop, or work truck. This allows for better organization and frees up valuable workspace. The holders are made from high-quality ABS plastic, ensuring durability and a secure fit.
This product is compatible with various Makita charger models, including single, double, and 4-port chargers such as DC18RC, DC18RD, DC18RA, DC18RF, DC18SC, DCB18SD, and DC18SF.
Image Description: An overview of the Crivnhar Charger Holder package contents, including the teal-colored holder pieces and screws. Below, two Makita chargers are shown mounted to a wall using the holders, demonstrating their application.
Package Contents
- 8 x Crivnhar Charger Holders
- 16 x Screws
Image Description: A visual representation of the package contents, showing eight teal charger mounts and sixteen black screws. The image also includes text confirming the quantity of items included.
Setup and Installation
- Prepare the Charger: If your Makita charger has rubber feet, these may need to be removed to allow the Crivnhar Charger Holders to fit properly.
- Attach Holders to Charger: Align the Crivnhar Charger Holders with the designated mounting points on the back of your Makita charger. The holders are designed to fit into the existing holes where rubber pads might be located.
- Secure Holders (Optional for added stability): For a firmer installation, especially if the charger will be subjected to movement or vibration, you can use the provided screws to tighten the holders to the charger. This expands the holder feet, creating a more secure fit.
- Mount Charger to Surface: Once the holders are attached to the charger, position the charger on your desired surface (wall, bench, etc.). Use the remaining screws to fasten the charger holders directly to the surface. You can rotate the charger holder to mount it directly without needing to pre-mark installation positions.
The design allows for individual placement of each holder, providing flexibility in mounting. Ensure the surface is suitable for screw installation.
Image Description: A diagram illustrating the dimensions of a single Crivnhar Charger Holder. It shows a length of 58mm, a width of 30mm, and a weight of 13g. A detailed inset highlights the 13mm length of the holder feet, emphasizing the expansion screw principle for better fixation.
Image Description: This image demonstrates the wide application of the Crivnhar Charger Holders. It shows a single Makita charger and a double Makita charger mounted to a wooden wall using the teal holders. Below, examples of compatible single, double, and 4-port chargers are displayed.
Operating Instructions
Once the Crivnhar Charger Holder is securely installed, your Makita charger can be easily placed onto and removed from the mounted holders. The design ensures the charger remains stable while allowing convenient access for charging batteries.
Simply slide your Makita charger onto the mounted holders until it is seated firmly. To remove, lift the charger off the holders.
Image Description: A workshop setting showing various power tools and two Makita chargers mounted on a wooden pegboard wall using the Crivnhar Charger Holders. This illustrates the practical application and space-saving benefits of the product.
Maintenance
The Crivnhar Charger Holders require minimal maintenance. Periodically check the screws for tightness to ensure the charger remains securely mounted. Clean with a damp cloth as needed.
Troubleshooting
If the charger does not feel secure after installation, ensure all screws are tightened properly. If mounting to a surface that experiences vibration or impact (e.g., inside a vehicle), consider using additional fasteners or a stronger adhesive in conjunction with the screws for enhanced stability.
Specifications
| Feature | Detail |
|---|---|
| Brand | Crivnhar |
| Model | Charger Holder |
| Compatible Chargers | Makita DC18RC, DC18RD, DC18RA, DC18RF, DC18SC, DCB18SD, DC18SF (Single, Double, and 4-Port Chargers) |
| Material | High-quality ABS Plastic |
| Item Weight (per holder) | 14 Grams (approx. 0.494 ounces) |
| Product Dimensions (per holder) | 4.72 x 6.3 x 1.97 inches (overall package dimensions, individual holder dimensions are 58mm x 30mm) |
| Mounting Type | Wall Mount |
| UPC | 780854891015 |
| Part Number | 0780854891015 |
Warranty Information
This product comes with a 6-month warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
Customer Support
For any questions, concerns, or assistance with your Crivnhar Charger Holder, please do not hesitate to contact our customer service team. We are committed to providing a completely satisfying solution.
You can visit the official Crivnhar Store on Amazon for more information and contact options: Crivnhar Store