SimpliSafe Wireless Smoke Detector Instruction Manual

1. Product Overview

The SimpliSafe Wireless Smoke Detector is designed to provide early warning of smoke and fire, integrating seamlessly with your SimpliSafe Home Security System. Built with photoelectric sensors, it detects smoke in its early, smouldering stage, providing crucial time for evacuation. When professionally monitored, the system alerts a 24/7 monitoring center, ensuring rapid emergency response even when you are away from home.

Figure 1: Front view of the SimpliSafe Wireless Smoke Detector.

Key Features:

• Instant alerts - even when you're not home - Get alerted to dangerous levels of smoke in your home in real time on your phone with the SimpliSafe app.
• Protected by professionals, 24/7 With the latest SimpliSafe security system, the Smoke Detector alerts our 24/7 professional monitoring center whenever there’s a threat to your home, ensuring fast emergency response (with select monitoring plans).
• Thoughtful system notifications - Always stay in-the-know with detailed information about your home’s status sent straight to your phone. And daily system checks make sure the detector is working properly.
• Simple setup - You don't need any wiring to set it up. Just screw the wall anchor to your ceiling and snap the detector into place.
• Pro Tip: For extra protection, put one on each level of your home and in sleeping areas.

2. Included Components

Your SimpliSafe Wireless Smoke Detector package includes:

• SimpliSafe Wireless Smoke Detector
• 1 CR-123A Lithium 3V battery (included)

3. Setup and Installation

3.1 Initial Setup

1. Activate the Base Station: Ensure your SimpliSafe Base Station is powered on and connected to your home network. The smoke detector communicates wirelessly with the Base Station.
2. Insert Battery: The smoke detector comes with a pre-installed CR-123A Lithium 3V battery. Ensure the battery pull tab is removed to activate the device.
3. Add to System: On your SimpliSafe Keypad, navigate to the 'Devices' menu. Select 'Add Device' and follow the on-screen prompts. The system will guide you to press the test button on the smoke detector to pair it.
4. Name the Detector: Once paired, the Keypad will prompt you to name the smoke detector (e.g., 'Living Room Smoke', 'Hallway Smoke'). Choose a descriptive name for easy identification.

Figure 2: Rear view showing the test button and battery compartment.

3.2 Mounting the Smoke Detector

For optimal performance and safety, follow these mounting guidelines:

• Location: Install smoke detectors on every level of your home, inside each sleeping area, and in the hallway outside of sleeping areas.
• Ceiling Mounting: The ideal location is on the ceiling, at least 4 inches (10 cm) from any wall.
• Wall Mounting: If ceiling mounting is not possible, mount on a wall between 4 and 12 inches (10-30 cm) from the ceiling.
• Avoid: Do not install near windows, doors, or air vents, as drafts can interfere with sensor operation. Avoid installing in kitchens, bathrooms, or garages where cooking fumes, steam, or exhaust can cause false alarms.

1. Choose Location: Select a suitable mounting location based on the guidelines above.
2. Secure Wall Anchor: Use the provided screws and wall anchors to secure the mounting bracket to the ceiling or wall.
3. Attach Detector: Align the smoke detector with the mounting bracket and twist clockwise until it clicks securely into place.

Figure 3: Smoke Detector mounted on a ceiling.

Figure 4: Smoke Detector mounted on a wall.

4. Operating Your Smoke Detector

4.1 System Modes

The SimpliSafe system operates in three main modes:

• Off Mode: The system is disarmed. Sensors are inactive.
• Home Mode: Designed for when you are home. Entry sensors (like door/window sensors) are armed, but motion sensors are typically disarmed to allow free movement. Smoke detectors are always active regardless of the system's arming status.
• Away Mode: Designed for when you are away. All sensors, including entry and motion sensors, are armed. Smoke detectors remain active.

4.2 Testing the Smoke Detector

Regular testing ensures your smoke detector is functioning correctly.

1. Initiate Test: Press and hold the test button on the smoke detector for a few seconds.
2. Listen for Alarm: The detector should emit a loud alarm sound.
3. System Confirmation: Your SimpliSafe Base Station should announce that the smoke detector is being tested, and you may receive a notification on your SimpliSafe app.
4. Repeat: Test all smoke detectors in your home at least once a month.

4.3 Professional Monitoring

With a professional monitoring plan, your SimpliSafe Smoke Detector is connected to a 24/7 monitoring center. In the event of a smoke alarm, the monitoring center will:

• Attempt to contact you and your emergency contacts.
• If contact cannot be made or if a real emergency is confirmed, they will dispatch emergency services (fire department) to your home.

5. Maintenance

5.1 Battery Replacement

The SimpliSafe Wireless Smoke Detector uses one CR-123A Lithium 3V battery, which can last up to 2 years. The system will notify you via the Keypad and app when the battery is low.

1. Remove Detector: Twist the smoke detector counter-clockwise from its mounting bracket to remove it.
2. Access Battery: Open the battery compartment cover on the back of the detector.
3. Replace Battery: Remove the old battery and insert a new CR-123A Lithium 3V battery, ensuring correct polarity.
4. Reattach Detector: Close the battery compartment and twist the detector back onto its mounting bracket.
5. Test: Perform a test as described in Section 4.2 to confirm proper operation.

5.2 Cleaning

To ensure proper function, clean your smoke detector regularly:

• Gently vacuum the exterior of the detector using a soft brush attachment to remove dust and debris.
• Do not use cleaning solvents or harsh chemicals.

6. Troubleshooting

6.1 False Alarms

If your smoke detector triggers a false alarm:

• Silence Alarm: Disarm your SimpliSafe system using the Keypad or the SimpliSafe app.
• Identify Cause: Check for common causes such as cooking fumes, steam from a shower, or dust.
• Ventilate: Open windows or doors to clear the air.
• System Notifications: The system provides thoughtful notifications about its status, which can help identify issues.

6.2 Low Battery Warning

If you receive a low battery warning:

• Refer to Section 5.1 for battery replacement instructions.
• Replace the battery promptly to ensure continuous protection.

7. Specifications

8. Warranty and Support

8.1 Warranty Information

The SimpliSafe Wireless Smoke Detector comes with a 1-Year Limited Warranty from the manufacturer.

8.2 Customer Support

For technical assistance, troubleshooting, or warranty claims, please refer to the official SimpliSafe website or contact their customer support directly.