Pure Garden 50-LG1278

Pure Garden Rectangular Patio Umbrella

Model: 50-LG1278

Introduction

Thank you for choosing the Pure Garden Rectangular Patio Umbrella. This 10-foot umbrella is designed to provide comfortable shade for your outdoor spaces, including gardens, patios, decks, and poolside areas. Featuring an easy crank lift and push-button tilt mechanism, it offers convenient operation and adjustable sun protection. This manual provides essential information for proper setup, operation, maintenance, and care to ensure long-lasting enjoyment of your product.

Setup Instructions

Components Included:

  • 1 x Rectangular Patio Umbrella (Canopy, Pole, Crank Mechanism, Ribs)

Note: A weighted umbrella base is not included and is required for stable installation. Ensure your base is compatible with a 1.5-inch diameter pole.

Assembly Steps:

  1. Carefully unpack all components from the packaging. Inspect for any damage.
  2. Insert the bottom section of the umbrella pole into a suitable weighted umbrella base (sold separately). Ensure the pole is securely seated and tightened within the base.
  3. Attach the upper section of the umbrella pole (with the canopy and crank mechanism) to the lower pole section. Twist or click into place until secure.
  4. Before opening, ensure there are no obstructions around the umbrella.
Diagram showing the dimensions of the rectangular patio umbrella: 10 feet long, 6.3 feet wide, and 8 feet high.

Image: Umbrella dimensions (10' L x 6.3' W x 8' H).

Close-up images showing the 1.9 inch diameter steel pole, the easy crank lift mechanism, and the 6 steel ribs supporting the umbrella canopy.

Image: Key components including the 1.9" diameter steel pole, easy crank lift, and 6 steel ribs.

Operating Instructions

Opening the Umbrella:

  1. Locate the crank handle on the umbrella pole.
  2. Turn the crank handle clockwise to smoothly open the umbrella canopy. Continue cranking until the canopy is fully extended and taut.

Closing the Umbrella:

  1. Turn the crank handle counter-clockwise to retract the umbrella canopy.
  2. Continue cranking until the canopy is fully closed and secured with the attached strap.

Tilting the Umbrella:

  1. Once the umbrella is fully open, locate the push button on the pole, typically above the crank mechanism.
  2. Press and hold the push button while gently tilting the canopy to your desired angle.
  3. Release the button to lock the umbrella in the tilted position.
  4. To return to the upright position, press the button again and gently push the canopy back into place.
An outdoor patio scene with the rectangular umbrella open, highlighting its push-button tilt feature, weather-resistant fabric, and anti-fade canopy.

Image: Umbrella features including push-button tilt, weather resistance, and anti-fade canopy.

A rectangular patio umbrella providing shade over a large outdoor dining table with chairs.

Image: Umbrella providing shade over an outdoor dining area.

Maintenance

Cleaning:

  • To clean the canopy, wipe with a damp cloth and mild soap. Rinse thoroughly with water.
  • Allow the canopy to air dry completely before closing or storing to prevent mildew.
  • Do not use harsh chemicals or abrasive cleaners, as these can damage the fabric.

Storage:

  • Always close and secure the umbrella with its strap when not in use or during windy conditions.
  • For prolonged periods of non-use or during severe weather, it is recommended to store the umbrella in a dry, protected area.
  • The removable cap makes it easy to disassemble for cleaning or storage.
The rectangular patio umbrella in a closed and folded position, secured with a strap.

Image: Closed umbrella, ready for storage or securing.

Troubleshooting

Umbrella Not Opening/Closing Smoothly:

  • Check for any obstructions in the canopy or around the crank mechanism.
  • Ensure the crank handle is turning freely. If stiff, a small amount of silicone lubricant can be applied to moving parts (avoiding fabric).
  • Verify that the pole sections are securely connected.

Umbrella Not Tilting:

  • Ensure the umbrella is fully open before attempting to tilt.
  • Confirm the push button is fully depressed when adjusting the tilt.
  • Check for any debris or foreign objects obstructing the tilt mechanism.

Canopy Fading:

  • While the polyester fabric is designed to resist fading, prolonged exposure to intense sunlight can cause some color degradation over time.
  • To minimize fading, close and cover the umbrella when not in use, especially during peak sun hours.

Stability Issues:

  • Ensure the umbrella is placed in a sufficiently heavy and stable base.
  • Never use the umbrella in strong winds. Always close and secure it immediately when windy conditions arise.

Specifications

FeatureDetail
Model Number50-LG1278
Dimensions (L x W x H)10' x 6' 4" x 8'
Canopy Material170GSM Polyester Fabric
Frame MaterialSteel (Alloy Steel Shaft)
Number of Ribs6
Pole Diameter1.5 inches
Opening MechanismCrank Lift
Tilt MechanismPush Button Tilt (Auto Tilt)
Special FeaturesVented Canopy
Item Weight13.1 Pounds
ColorHunter Green

Warranty Information

This Pure Garden Rectangular Patio Umbrella is covered by a 30 Day Limited Warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from misuse, neglect, accidents, improper assembly, or exposure to extreme weather conditions. Please retain your proof of purchase for warranty claims.

Customer Support

If you have any questions regarding the assembly, operation, maintenance, or warranty of your Pure Garden Rectangular Patio Umbrella, please contact the manufacturer's customer service. Refer to your purchase documentation or the Pure Garden official website for contact details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.