MACTREM 67" Phone Tripod Instruction Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your MACTREM 67" Phone Tripod. Designed for versatility, this tripod is compatible with smartphones, tablets, and cameras, offering stable support for various photography and videography needs, including video recording, selfies, live streaming, and vlogging.

Image: Overview of the MACTREM 67" Phone Tripod, showing the tripod, remote, carry bag, and various device mounting options (phone, tablet, camera).

What's in the Box

Please check the package contents to ensure all items are present:

• Tripod
• Big iPad Holder (2-in-1 Phone/Tablet Mount)
• Bluetooth Remote
• Manual
• Carry Bag

Setup Instructions

1. Unfolding the Tripod

1. Place the tripod on a flat, stable surface.
2. Gently spread the tripod legs outwards until they are fully extended and stable.
3. Loosen the Center Column Lock Knob (refer to parts diagram) and extend the center column to your desired height. Tighten the knob to secure.
4. Extend the leg sections by flipping open the Flip Locks on each leg. Extend to the desired length and close the Flip Locks to secure.

Image: Visual guide demonstrating how to adjust the tripod height from 40cm (15.7in) to 172cm (67in) using leg extensions and the center column.

Image: Detailed diagram highlighting key components of the tripod, such as the 90° Vertical Lock Knob, 180° Tilt Handle, Aluminum Alloy Legs, Flip Locks, 360° Rotating Lock Knob, Center Column Lock Knob, Center Shaft Fixed Piece, and Non-slip Pads.

2. Attaching the Device Holder

The 2-in-1 Super Phone Holder can accommodate both smartphones and tablets.

1. Screw the 2-in-1 Phone/Tablet Holder onto the tripod's 1/4" screw mount at the top of the pan head. Ensure it is securely tightened.
2. To insert a smartphone, gently pull apart the spring-loaded clamp and place your phone inside. The clamp adjusts from 2.7" to 9" (5.8-8.5cm for phones, 11.5-18cm for tablets).
3. For tablets, extend the holder to its full capacity. The "double-hook anti-slip" design ensures a secure grip.

Image: Illustration of the 2-in-1 Phone & Tablet Holder, detailing its adjustable width for various mobile phones (5.8-8.5cm) and iPads/tablets (11.5-18cm), along with its extended dimensions.

3. Pairing the Wireless Remote Shutter

The included Bluetooth remote allows for convenient photo and video capture from a distance.

1. Ensure the remote control has a battery installed (1 Lithium Ion battery required, typically pre-installed).
2. Turn on the remote by sliding the ON/OFF switch. The indicator light will blink.
3. On your smartphone or tablet, go to Bluetooth settings.
4. Search for new devices and select "AB Shutter3" (or similar name) from the list to pair.
5. Once paired, the indicator light on the remote will stop blinking. You can now use the remote to trigger your device's camera shutter.

Image: Step-by-step visual guide for pairing the Bluetooth Remote Control with both Android and iOS devices, showing the remote's ON/OFF switch and indicator light.

Operating Instructions

1. Adjusting Angles and Orientation

• Pan Adjustment: Loosen the 360° Rotating Lock Knob to rotate the tripod head horizontally for panoramic shots. Tighten to secure.
• Tilt Adjustment: Use the 180° Tilt Handle to adjust the vertical angle of your device. Loosen the handle, set the angle, and tighten to secure.
• Vertical Shooting: The 90° Vertical Lock Knob allows you to quickly switch between horizontal and vertical shooting orientations.

Image: Demonstrates the tripod's 360° panoramic shooting capability and the ability to adjust the device to 90° vertical or 180° tilt angles for precise framing.

2. Using the Wireless Remote

• Once paired, simply press the corresponding button on the remote (iOS or Android) to trigger your device's camera shutter.
• The remote has a range of up to 33 feet (10 meters).
• Remember to turn off the remote when not in use to conserve battery life.

Image: Shows the MACTREM tripod being used in various scenarios, highlighting its compatibility with cameras, smartphones, iPads, and ring lights for diverse applications.

Maintenance

• Cleaning: Wipe the tripod with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure the tripod is completely dry before storage. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the tripod in its carry bag in a cool, dry place away from direct sunlight and extreme temperatures. Ensure all locks are disengaged and the tripod is fully collapsed before storing to prevent stress on components.
• Battery Replacement (Remote): If the remote's indicator light does not illuminate or it fails to pair, replace the Lithium Ion battery.

Troubleshooting

Specifications

Warranty and Support

MACTREM offers a 12-month warranty for this product. If you encounter any issues or have questions regarding your MACTREM 67" Phone Tripod, please contact MACTREM customer support for assistance. They are committed to providing prompt and satisfactory solutions.

For support, please refer to the contact information provided with your product packaging or visit the official MACTREM website.