Introduction
Thank you for choosing the ONEWISH Touch Bedside Table Lamp Set. This manual provides essential information for the safe and efficient use of your new lamps. Please read these instructions carefully before installation and operation, and retain them for future reference.
Image: Two ONEWISH Touch Bedside Table Lamps, showcasing their design and warm illumination.
Package Contents
Please verify that all components are present in the package:
- 2 x ONEWISH Touch Bedside Table Lamp Bases
- 2 x Frosted Opal Glass Lamp Shades
- 2 x E26 LED Bulbs (6.5W, 3000K Warm Light)
- 1 x Instruction Manual
Safety Information
- Ensure the power is off before installation or maintenance.
- Do not use in wet locations or near water.
- Use only the specified bulb type (E26 LED, max 60W equivalent).
- Keep out of reach of children.
- Do not attempt to modify the lamp.
Setup and Installation
Follow these steps to assemble your ONEWISH Touch Bedside Table Lamp:
- Carefully unpack all components from the packaging.
- Screw out the plastic lampholder ring from the lamp base.
- Place the frosted opal glass shade onto the lamp base, aligning it properly.
- Screw in the plastic lampholder ring to secure the glass shade. Do not overtighten.
- Screw the provided E26 LED bulb into the lamp socket.
- Place the assembled lamp on a stable, flat surface.
- Plug the power cord into a standard electrical outlet.
Image: Visual guide for lamp assembly, illustrating the four-step process of attaching the shade and bulb.
Operating Instructions
The ONEWISH Touch Bedside Table Lamp features a convenient touch control system with three brightness levels.
- To Turn On/Adjust Brightness: Lightly touch any metal part of the lamp base.
- The first touch will activate the Low Light setting.
- The second touch will activate the Medium Light setting.
- The third touch will activate the High Light setting.
- To Turn Off: A fourth touch will turn the lamp off.
Image: Touch control diagram demonstrating the 3-way dimmable feature.
Image: Visual representation of the three dimmable light settings.
Maintenance
- Cleaning: Disconnect the lamp from power before cleaning. Wipe the metal base with a soft, dry cloth. The glass shade can be gently wiped with a damp cloth and then dried. Avoid abrasive cleaners or solvents.
- Bulb Replacement: Ensure the lamp is unplugged and cool before replacing the bulb. Unscrew the plastic lampholder ring, remove the glass shade, then unscrew the old E26 bulb and replace it with a new E26 LED bulb (maximum 60W equivalent). Reassemble the lamp by securing the shade with the lampholder ring.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. |
|
|
| Touch control is unresponsive. |
|
|
| Light flickers or dims unexpectedly. |
|
|
Specifications
| Brand | ONEWISH |
| Model Number | 13TAB028USC |
| Product Dimensions | 5.51"D x 5.51"W x 7.48"H |
| Item Weight | 1.8 Pounds (per lamp) |
| Base Material | Metal |
| Shade Material | Glass (Opal) |
| Bulb Base | E26 |
| Light Source Type | LED (Bulb Included) |
| Wattage | 6.5W (LED) |
| Maximum Compatible Wattage | 60 Watt Hours (equivalent) |
| Voltage | 120 Volts (AC) |
| Color Temperature | 3000 Kelvin (Warm Light) |
| Brightness | 600 Lumens |
| Control Method | Touch |
| Special Feature | 3-Way Dimmable |
| Power Source | Corded Electric |
| Indoor/Outdoor Usage | Indoor use only |
Image: Lamp dimensions and bulb specifications.
Warranty and Support
Your ONEWISH Touch Bedside Table Lamp Set comes with a 1-year protection from the date of purchase.
For any issues, concerns, or questions regarding your product, please do not hesitate to contact ONEWISH customer support. We are committed to responding within 24 hours and resolving any issues as quickly as possible.
Please refer to your purchase documentation or the retailer's website for specific contact information.
