1. Product Overview
This document provides instructions for the FAFAFROG USB Magnetic Charging Cable, designed specifically for the FAFAFROG Dog Bark Collar. This cable ensures efficient and secure charging for your device.
Key Features:
- Compatibility: Exclusively designed for FAFAFROG Bark Collars.
- Power Requirement: Compatible only with 5V/2A adapters (adapter not included).
- Durability: Constructed from premium materials for long-lasting use.
- Magnetic Connection: Features a magnetic design for easy, secure, and efficient charging, minimizing poor contact.
- Longevity: Proper storage after charging is recommended to prevent damage and prolong the lifespan of both the cable and the bark collar.


2. Important Usage Guidelines for Bark Collars
It is important to understand that bark collars are training aids and are not intended for continuous wear. Prolonged use can lead to skin irritation or behavioral issues. Use the collar only when necessary for training purposes, such as during specific times when barking needs to be managed.
Always begin with the lowest effective setting for sound or vibration. Shock settings should only be considered if sound and vibration are ineffective, and always at the lowest possible level. The goal is to deter unwanted barking, not to cause distress.
3. Setup and Charging
Charging the Bark Collar:
- Ensure your FAFAFROG Bark Collar is clean and dry before charging.
- Connect the USB end of the magnetic charging cable to a compatible 5V/2A USB power adapter (not included), a car charger, power bank, or a computer's USB port.
- Align the magnetic end of the charging cable with the charging contacts on the back of the FAFAFROG Bark Collar. The magnetic connection will snap into place, ensuring proper contact.
- The collar's display or indicator light will show that it is charging. A full charge typically takes approximately 2 hours.
- Once fully charged, disconnect the cable from the collar and the power source.
4. Operating the Bark Collar
Power On/Off:
- To turn on the collar, press and hold the power button (usually marked with a power symbol) until the display illuminates.
- To turn off the collar, press and hold the power button again until the display turns off or you hear a confirmation sound.
Adjusting Modes and Sensitivity:
- The collar typically features different modes such as sound, vibration, and potentially static shock. Use the mode button (often marked 'M') to cycle through these options.
- Sensitivity levels (e.g., 1-5) can usually be adjusted for each mode. After selecting a mode, use the power button (or a dedicated sensitivity button if available) to increase or decrease the sensitivity. Higher sensitivity means the collar will react to softer barks.
- Always start with the lowest sensitivity level and gradually increase it until you find the appropriate response for your dog.
5. Maintenance
To ensure the longevity and optimal performance of your FAFAFROG Dog Bark Collar Charging Cord, it is recommended to properly store the cable after each use. Avoid tangling or bending the cable excessively. Keep it in a clean, dry place away from extreme temperatures and direct sunlight. Regularly inspect the cable for any signs of wear or damage.
6. Troubleshooting
Charging Issues:
- Collar not charging: Ensure the magnetic connection is secure and properly aligned. Verify that the USB power adapter is 5V/2A and functioning correctly. Try a different USB port or power source.
- Slow charging: Confirm your power adapter meets the 5V/2A specification. Lower amperage adapters may charge slower.
- Intermittent connection: Check the magnetic contacts on both the cable and the collar for any debris or damage. Clean gently if necessary.
If you experience persistent issues, please refer to the full bark collar user manual or contact FAFAFROG customer support for further assistance.
7. Product Specifications
| Feature | Specification |
|---|---|
| Brand | FAFAFROG |
| Model Name | FAFAFROG Dog Bark Collar Charger |
| Connector Type | USB Type A |
| Cable Type | USB |
| Compatible Devices | FAFAFROG Dog Bark Collar, Laptop, PC |
| Special Feature | Magnetic |
| Connector Gender | Male-to-Male |
| Number of Pins | 4 |
| Wattage | 10 watts |
| Maximum Voltage | 5 Volts |
| Recommended Uses | Charging the FAFAFROG dog bark collar |
| Indoor/Outdoor Usage | Indoor, Outdoor |
| Color | Black |
| Item Shape | Round |
| Item Weight | 0.02 Kilograms |
| Number of Items | 1 |
8. Warranty and Support
Specific warranty details for the FAFAFROG Dog Bark Collar Charging Cord are not provided in the available product information. For warranty claims, technical support, or any product-related inquiries, please refer to the contact information provided with your original product packaging or visit the official FAFAFROG website.




