OneOdio A10 Hybrid Active Noise Cancelling Headphones

1. Introduction

Thank you for choosing the OneOdio A10 Hybrid Active Noise Cancelling Headphones. This manual provides essential information for setting up, operating, and maintaining your headphones to ensure optimal performance and longevity. Please read this manual thoroughly before use.

What's in the Box

• 1 x OneOdio A10 Noise Cancelling Headphones
• 1 x Carrying Travel Case
• 1 x AUX 3.5mm Cable
• 1 x USB-C Charging Cable
• 1 x User Manual

Image: The OneOdio A10 headphones, protective box, 3.5mm audio cable, USB-C charging cable, and user manual, all neatly arranged.

2. Safety Information

To ensure safe and proper use of your OneOdio A10 headphones, please observe the following guidelines:

• Do not expose the headphones to extreme temperatures, humidity, or corrosive substances.
• Avoid dropping or subjecting the headphones to strong impacts.
• Do not disassemble or modify the headphones. This will void the warranty.
• Listen at moderate volume levels to prevent hearing damage. Prolonged exposure to loud sounds can cause irreversible hearing loss.
• Do not use the headphones in situations where inability to hear ambient sounds could be dangerous, such as while driving, cycling, or walking in traffic.
• Keep the headphones and accessories out of reach of children and pets.

3. Product Overview

Headphone Components and Controls

Image: A detailed view of the right ear cup of the OneOdio A10 headphones, highlighting the location of the Volume +, Power On/Off, Volume -, and ANC On/Off/Transparency Mode buttons.

4. Setup

Charging the Headphones

Before first use, fully charge your OneOdio A10 headphones. Connect the provided USB-C charging cable to the charging port on the headphones and to a compatible USB power source. The LED indicator will show charging status. A full charge provides up to 50 hours of playtime in Bluetooth mode or 40 hours with ANC enabled. A quick 5-minute charge can provide 2 hours of playback.

Image: A visual representation of the OneOdio A10 headphones with battery life indicators for ANC (62 Hours), Bluetooth (50 Hours), and ANC+BT (40 Hours) at 70% volume, and similar figures for 50% volume.

Initial Bluetooth Pairing

1. Ensure the headphones are powered off.
2. Press and hold the Power On/Off button for approximately 3-5 seconds until the LED indicator flashes blue and red, indicating pairing mode.
3. On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
4. Select "OneOdio A10" from the list of found devices.
5. Once connected, the LED indicator will turn solid blue.

5. Operating Instructions

Bluetooth Connection

The OneOdio A10 headphones support multi-device pairing, allowing you to connect to two Bluetooth devices simultaneously. After initial pairing, the headphones will automatically attempt to connect to the last paired device when powered on. If connection fails, manually select "OneOdio A10" from your device's Bluetooth settings.

Image: The OneOdio A10 headphones positioned between a smartphone and a laptop, demonstrating their ability to connect to multiple devices simultaneously.

Wired Connection

For a wired connection, use the provided 3.5mm AUX cable. Connect one end to the headphone's 3.5mm audio jack and the other end to your audio source. The headphones can be used in wired mode even when powered off, though ANC functionality requires power. Note that the built-in microphone on the headphones may not function in wired mode with all devices; an AUX cable with an integrated microphone may be required for microphone functionality in wired mode.

Active Noise Cancellation (ANC) and Transparency Mode

The OneOdio A10 features a 5-microphone hybrid ANC system to reduce ambient noise. Use the dedicated ANC switch to toggle between modes:

• Active Noise Cancellation (ANC) On: Filters out up to 95% of low-frequency ambient noise, creating a quieter listening environment.

Image: A woman smiling while wearing the OneOdio A10 headphones, with a circular graphic around her head indicating active noise cancellation is engaged, blocking out surrounding sounds.

• Transparency Mode: Allows ambient sounds to pass through, enabling you to hear your surroundings without removing the headphones.

Image: A man wearing the OneOdio A10 headphones on a city street, with a graphic indicating that ambient sounds are allowed to pass through, enabling awareness of surroundings.

• ANC Off: Disables noise cancellation. Even when the headphones are powered off, pressing the ANC button activates noise cancellation independently, allowing for quiet environments without music.

Image: A man comfortably seated on an airplane, wearing the OneOdio A10 headphones and reading a book, demonstrating that ANC can be active even when the headphones are not playing audio, providing a quiet environment.

Call Functions

• Answer/End Call: Short press the Power On/Off button.
• Reject Call: Long press the Power On/Off button.

Music Playback

• Play/Pause: Short press the Power On/Off button.
• Next Track: Long press the Volume - button.
• Previous Track: Long press the Volume + button.

6. Maintenance

Cleaning

• Wipe the headphones with a soft, dry cloth.
• Do not use harsh chemicals, cleaning solvents, or strong detergents.
• Clean the ear pads regularly with a damp cloth and mild soap solution, then dry thoroughly.

Storage

• Store the headphones in the provided travel case when not in use to protect them from dust and damage.
• Avoid storing in areas with extreme temperatures or high humidity.

7. Troubleshooting

Common Issues and Solutions

8. Specifications

Technical Specifications

9. Warranty and Support

Warranty Information

OneOdio products are designed and manufactured to the highest quality standards. For specific warranty details and terms, please refer to the warranty card included with your product or visit the official OneOdio website. Keep your proof of purchase for warranty claims.

Customer Support

If you encounter any issues or have questions regarding your OneOdio A10 headphones that are not covered in this manual, please contact OneOdio customer support. You can find contact information on the official OneOdio website or through your retailer's support channels. Please have your product model and purchase details ready when contacting support.