Fluance AI81BDB10W

Fluance Ai81 Floorstanding Speakers & DB10 Subwoofer Instruction Manual

Model: AI81BDB10W

1. Introduction and Overview

This manual provides essential information for the setup, operation, and maintenance of your Fluance Ai81 Powered Floorstanding Tower Speakers and DB10 10-inch Low Frequency Ported Front Firing Powered Subwoofer. Please read these instructions carefully before use to ensure optimal performance and longevity of your audio system.

Key Features:

Fluance Ai81 Powered Floorstanding Tower Speakers and DB10 Subwoofer in Natural Walnut
Fluance Ai81 Powered Floorstanding Tower Speakers and DB10 Subwoofer in Natural Walnut finish.

2. What's Included (Unboxing)

Your Fluance Ai81 speakers and DB10 subwoofer are packaged securely to prevent damage during transit. Please retain all original packaging for transportation and warranty purposes.

Package Contents:

Diagram showing all included components: Active Speaker, Passive Speaker, Remote Control, CR2032 Battery, Power Cable, Speaker Wire, Quick Start Guide, Fluance Catalog
All components included in the Fluance Ai81 and DB10 package.

Unboxing Video:

This video demonstrates the unboxing process for the Fluance Ai81 Powered Floorstanding Speakers, showing how to safely remove components from the packaging.

3. Setup Instructions

Follow these steps to correctly set up your Fluance Ai81 speakers and DB10 subwoofer for optimal audio performance.

3.1 Remote Control Battery Installation:

  1. Locate the CR2032 battery and the remote control from the accessory box.
  2. Open the battery compartment on the remote control.
  3. Insert the CR2032 battery with the positive (+) side facing up.
  4. Close the battery compartment securely.

3.2 Speaker Wire Connection:

  1. Unthread the binding posts on the back of both the active and passive speakers until the hole in the post is exposed.
  2. Insert the speaker wire into the exposed hole. Ensure that the conductive part of the wire makes contact, not the insulation jacket. If needed, strip more insulation from the wire.
  3. Tighten the binding post cap.
  4. Connect red to red and black to black binding posts on both speakers to maintain correct polarity.
Back panel of Fluance Ai81 speaker showing binding posts for speaker wire connection
Speaker wire connection points on the back of the Ai81 speaker.

3.3 Power Connection:

  1. Plug the 6ft power cable into the back panel of the active Ai81 speaker and the other end into a wall outlet.
  2. Press the power switch on the back of the active speaker to turn it on. The speaker will start in standby mode (indicated by a red LED).
  3. Plug the 5.33ft power cable into the DB10 subwoofer and then into a wall outlet.

3.4 Subwoofer Connection:

The Ai81 Powered Floorstanding Speakers include a sub-out connection for use with any powered subwoofer, such as the Fluance DB10. Simply plug the subwoofer into the sub-out connection on the active Ai81 speaker. Any frequency under 80Hz will be routed through the subwoofer.

Back panel of Fluance Ai81 speaker showing RCA input, optical input, and sub output connections
Subwoofer output connection on the active Ai81 speaker.

Setup Video:

This video provides a step-by-step guide on how to set up your Fluance Ai81 Powered Floorstanding Speakers.

4. Operating Instructions

Your Ai81 speakers offer various ways to control playback and customize your audio experience.

4.1 Volume and Source Control:

4.2 LED Indicator Meanings:

The LED indicator on the front of the active speaker shows the current audio input:

4.3 Adjusting Treble and Bass:

Use the remote control to adjust the treble and bass levels to your preference. The LED indicator will flash to confirm adjustments.

5. Troubleshooting

If you encounter any issues with your Ai81 speakers or DB10 subwoofer, please refer to the following common troubleshooting tips:

5.1 No Sound or Poor Sound Quality:

6. Specifications

FeatureDescription
BrandFluance
Model NameAi81
Item Model NumberAI81BDB10W
Speaker TypeFloorstanding
MaterialWood
ColorNatural Walnut
Connectivity TechnologyBluetooth, Optical, RCA
Wireless Communication TechnologyBluetooth
Speaker Maximum Output Power150 Watts
Subwoofer Diameter10 Inches
Woofer Diameter10 Inches
Tweeter Diameter0.65 Inches
Audio Driver Size6.5 Inches
Control MethodRemote
Item Weight84.3 Pounds
Product Dimensions26.24 x 11.9 x 37.8 inches
Indoor/Outdoor UsageIndoor

7. Warranty and Support

Your Fluance Ai81 Powered Floorstanding Tower Speakers and DB10 Subwoofer come with comprehensive support to ensure your satisfaction.

For further assistance, please refer to the Fluance catalog included in your package or visit the official Fluance website.