Bluedee 14W HiFi Stereo PC Speakers User Manual

Introduction

Thank you for choosing Bluedee Computer Speakers. This manual provides detailed instructions for setting up, operating, and maintaining your new speakers to ensure optimal performance and longevity. Please read this manual thoroughly before use and retain it for future reference.

What's in the Box

• 1x Bluedee Computer Speaker
• 1x 3.5mm Audio Cable
• 1x AC Adapter (0.5 ft)
• 1x User Manual

Product Overview

The Bluedee 14W HiFi Stereo PC Speakers are designed to deliver rich, immersive audio for your desktop, laptop, or other compatible devices. Featuring dual 7W drivers and 2 bass diaphragms, these speakers provide powerful sound with enhanced bass. The integrated RGB lighting offers three dynamic modes to enhance your listening and gaming experience.

Image: Front view of the Bluedee PC Speaker with RGB lighting enabled.

Image: Diagram illustrating the dual full-range speaker units, mica fiber diaphragms, and AC adapter.

Setup

Power Connection

1. Plug the AC adapter into a power source.

2. Connect the DC plug of the AC adapter to the power port on the back of the speaker.

Video: Demonstrates how to plug in the AC adapter and power on the speaker.

Initial Power On

Press and hold the power button on the top of the speaker for 3 seconds. The bottom RGB light will illuminate, indicating the speaker is powered on and ready for pairing.

Image: Close-up view of the control buttons on top of the speaker bar, including power, volume, play/pause, bass, and light mode.

Operating Instructions

Connectivity Modes

The Bluedee speakers support two connection methods: Bluetooth 5.0 and 3.5mm Aux-in wired connection.

• Bluetooth Mode: When powered on, the speaker will automatically enter Bluetooth pairing mode. Search for "BD-SK200" on your device's Bluetooth settings and connect.
• Aux-in Wired Mode: Plug the provided 3.5mm audio cable into the AUX input port on the back of the speaker and connect the other end to your audio device's headphone jack. Press the power button once to switch to wired mode.

Video: Instructions on how to connect the speaker in wired mode using the AUX cable.

Image: Visual representation of connecting devices via 3.5mm Aux cable and Bluetooth 5.0.

RGB Lighting Control

The speaker features stunning RGB lighting with three modes: Flow, Breathing, and Rhythm. Press the light bulb button on the top panel to cycle through the modes or turn the lights off.

Image: Depicts the three RGB lighting modes: Flow, Breathing, and Rhythm, making sound visible.

Bass and Balance Modes

Press the 'BASS' button on the top panel to switch between bass mode (for deeper bass) and balance mode (for a more even sound profile).

Specifications

Image: Dimensions of the Bluedee speaker bar (16.4" L x 3.1" D x 2.9" H).

Cleaning and Maintenance

• Clean the Sound Bar on a regular basis.
• Use a dry and soft cotton cloth to wipe the unit.
• Keep away from sharp objects to avoid scratches.
• Put the unit in a dry and shady place if it is to be idle for a long time.
• Do not clean the product with detergent or chemicals.

Troubleshooting

• No Power: Ensure the AC adapter is securely plugged into both the speaker and a working power outlet.
• No Sound: Check the volume levels on both the speaker and your connected device. Ensure the correct input mode (Bluetooth or Aux) is selected.
• Bluetooth Disconnection: Ensure the speaker is within the 10-meter Bluetooth range of your device. Disconnect and re-pair the device if issues persist.

Warranty and Support

This product comes with an 18-month warranty. For any problems or questions, please contact Bluedee Customer Care Centre. Refer to the contact information provided in the included User Guide PDF for details.

You can also access the official User Guide here.