Varmilo VA Series V2 Summit R2 TKL Double Mode Mechanical Keyboard User Manual

Introduction

This manual provides comprehensive instructions for the Varmilo VA Series V2 Summit R2 TKL Double Mode Mechanical Keyboard. This keyboard features both wired USB-C and wireless Bluetooth connectivity, a Tenkeyless (TKL) form factor, and Cherry MX Silent Red mechanical switches. Key enhancements in the V2 series include upgraded double-section kickstands, north-facing LEDs, integrated cable grooves, and sound-proof silicone pads for an optimized typing experience.

Image: Top-down view of the Varmilo VA Series V2 Summit R2 TKL Mechanical Keyboard, showcasing its full layout and keycap design.

Image: Angled view of the Varmilo VA Series V2 Summit R2 TKL keyboard, highlighting the gradient keycap colors and compact layout.

Setup

1. Package Contents

Verify that your package contains the following items:

• Varmilo VA Series V2 Summit R2 TKL Mechanical Keyboard
• USB-C Cable
• User Manual (this document)

2. Connecting the Keyboard

The keyboard supports both wired and wireless (Bluetooth) connections.

Wired Connection:

1. Locate the USB-C port on the back of the keyboard.
2. Connect the provided USB-C cable to the keyboard and the other end to an available USB port on your computer.
3. The keyboard will be automatically recognized by your operating system.

Wireless (Bluetooth) Connection:

Specific instructions for Bluetooth pairing may vary slightly depending on the keyboard's firmware. Generally, you will need to:

1. Ensure the keyboard is in Bluetooth mode (refer to the keyboard's physical switch or key combination for mode selection, usually Fn + a specific key).
2. On your computer or device, navigate to Bluetooth settings.
3. Search for available devices and select "Varmilo VA Series V2" or a similar identifier.
4. Follow any on-screen prompts to complete the pairing process.

Image: The Varmilo VA Series V2 Summit R2 TKL keyboard positioned on a themed desk mat, illustrating a typical setup.

3. Adjusting Kickstands and Cable Routing

The keyboard features double-section kickstands, allowing for two different typing angles. Gently pull out the kickstands on the underside of the keyboard to adjust. The V2 series also includes cable grooves on the bottom case, enabling the USB-C cable to exit from the left, right, or middle of the keyboard for organized cable management.

Image: Underside of the keyboard, highlighting the double-section adjustable kickstands and the integrated cable routing channels.

Operating Instructions

1. Basic Typing

The Varmilo VA Series V2 Summit R2 TKL keyboard functions as a standard mechanical keyboard. Simply connect it to your device and begin typing. The Cherry MX Silent Red switches provide a linear and quiet typing experience.

2. Function Key Combinations

Utilize the Fn key in combination with the F-keys (F1-F12) and other designated keys for various multimedia and system functions. Common functions include:

• Fn + F1-F3: Volume control (Mute, Volume Down, Volume Up)
• Fn + F5-F8: Media playback control (Previous Track, Play/Pause, Next Track, Stop)
• Fn + Win: Lock/Unlock Windows key
• Fn + other keys: May activate specific lighting modes or other features depending on the keyboard's firmware. Refer to the keycap legends for specific icons.

Image: A detailed view of several keycaps, showcasing the unique legends and the texture of the PBT material.

3. Indicator Lights

All indicator lights (e.g., Caps Lock, Scroll Lock, Bluetooth status) are located on the top right of the keyboard to minimize distractions during use.

Maintenance

1. Cleaning the Keyboard

• Keycaps: Use a soft, damp cloth with mild soap and water to clean the PBT keycaps. Ensure they are completely dry before reattaching.
• Chassis: Wipe the keyboard chassis with a dry or slightly damp cloth. Avoid excessive moisture.
• Between Keycaps: Use compressed air to remove dust and debris from between the keycaps and switches.

2. Keycap Removal and Installation

The keyboard features durable Dye Sub PBT keycaps. If you need to remove keycaps for cleaning or replacement, use a keycap puller to gently lift them straight up. When installing, align the keycap stem with the switch stem and press down gently until it clicks into place.

Image: Various keycaps from the Varmilo VA Series V2 keyboard, including the spacebar and novelty keys, displayed separately.

Troubleshooting

Common Issues and Solutions:

• Keyboard not responding (Wired):
  • Ensure the USB-C cable is securely connected to both the keyboard and the computer.
  • Try a different USB port on your computer.
  • Test with a different USB-C cable if available.
• Keyboard not responding (Wireless/Bluetooth):
  • Verify the keyboard is in Bluetooth mode and fully charged.
  • Ensure Bluetooth is enabled on your computer/device.
  • Remove the keyboard from your device's paired Bluetooth devices list and attempt to re-pair.
  • Move the keyboard closer to your device to rule out range issues.
• Keys not registering:
  • Check for any debris under the keycap that might be obstructing the switch.
  • Ensure the keycap is properly seated on the switch stem.
  • If using wireless, check battery level.

If you continue to experience issues, please refer to the Warranty and Support section for further assistance.

Specifications

Warranty and Support

For detailed warranty information, product support, or to contact customer service, please visit the official Varmilo website or their official store page. Keep your proof of purchase for warranty claims.

Varmilo Amazon Store: https://www.amazon.com/stores/Varmilo/page/7F4A3B6A-7401-4B77-9F2F-19B745B11E10