Lasko EcoQuiet Oscillating Pedestal Fan

1. Introduction

Thank you for choosing the Lasko EcoQuiet Oscillating Pedestal Fan, Model S18705. This manual provides important information regarding the assembly, operation, maintenance, and safety of your new fan. Please read it thoroughly before use and retain it for future reference.

The Lasko EcoQuiet fan is designed for optimal air circulation with a focus on energy efficiency and quiet operation. Key features include a DC motor, 12 performance speeds, widespread oscillation, adjustable height, a tilt-back fan head, and a convenient remote control.

Figure 1: Lasko EcoQuiet Oscillating Pedestal Fan, Model S18705.

2. Important Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons. This fan is equipped with Lasko's trusted safety fuse technology, known as THE BLUE Plug, designed to cut off electric current if it detects a potentially hazardous electrical fault in the motor or power supply.

• Read all instructions before using this fan.
• Use this fan only as described in this manual. Other uses not recommended may cause fire, electric shock, or injury to persons.
• To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
• This fan is for indoor use only. Do not use outdoors.
• Always unplug the fan before moving, cleaning, or servicing.
• Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
• Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the fan.

3. Setup and Assembly

Your Lasko EcoQuiet Pedestal Fan requires simple, no-tools assembly. Follow these steps to set up your fan:

1. Base Assembly: Insert the lower pole into the fan base. Ensure it is securely seated.
2. Attach Motor Head: Place the motor head assembly onto the top of the pole. Align the grooves and push down firmly until it clicks into place.
3. Install Rear Grille: Position the rear grille onto the motor housing, ensuring the alignment tabs fit into the slots. Secure it with the plastic screw-on ring.
4. Attach Fan Blades: Slide the fan blades onto the motor shaft. Secure them with the smaller plastic cap, turning clockwise until tight.
5. Install Front Grille: Align the front grille with the rear grille and snap it into place. Ensure all clips are securely fastened.

Figure 2: Visual guide to fan assembly and key adjustable features.

4. Operating Instructions

Your Lasko EcoQuiet fan can be operated using the control panel on the fan unit or the included multi-function remote control.

4.1 Control Panel

The control panel is located on the front of the fan's pole. It features a digital display and several buttons:

• Power Button (⏻): Press to turn the fan ON or OFF.
• Speed Control Dial: Rotate the green dial to adjust the fan speed from 1 (lowest) to 12 (highest). The digital display will show the current speed setting.
• Oscillation Button (↻): Press to activate or deactivate widespread oscillation, allowing the fan head to move from side to side.
• Timer Button (⏲): Press repeatedly to set the auto-off timer for up to 8 hours. Each press adds 1 hour to the timer.

Figure 3: Detailed view of the fan's control panel.

4.2 Remote Control

The remote control provides convenient access to all fan functions from a distance. It requires two AAA batteries (not included). The remote can be stored in a dedicated slot on the back of the fan's motor head.

• Power Button: Turns the fan ON/OFF.
• Speed Up/Down Buttons: Adjust the fan speed.
• Oscillation Button: Activates/deactivates oscillation.
• Timer Button: Sets the auto-off timer.

Figure 4: Remote control storage on the back of the fan.

4.3 Adjustable Features

• Height Adjustment: The fan's height can be adjusted from 42 inches to 52 inches. Loosen the height adjustment knob on the pole, raise or lower the fan to the desired height, and then tighten the knob securely.
• Tilt-Back Fan Head: The fan head can be tilted to direct airflow precisely where needed. Gently push or pull the fan head to adjust its angle.

Figure 5: Fan head tilt adjustment.

Figure 6: Fan at its lowest height setting.

5. Maintenance

Regular cleaning and maintenance will ensure your fan operates efficiently and safely for years to come.

• Cleaning: Always unplug the fan before cleaning. The front and rear grilles can be easily removed for cleaning. Wipe the fan blades and grilles with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure all parts are completely dry before reassembling and operating the fan.
• Storage: When not in use, store the fan in a cool, dry place. It is recommended to store it in its original box to protect it from dust and damage.

6. Troubleshooting

If your fan is not operating as expected, please refer to the following common issues and solutions:

• Fan does not turn on:
  - Ensure the power cord is securely plugged into a working electrical outlet.
  - Check if the circuit breaker has tripped.
  - Verify that THE BLUE Plug safety fuse has not activated. If it has, unplug the fan and check for any electrical faults before resetting.
• Reduced airflow:
  - Clean the fan blades and grilles to remove any dust or debris buildup.
• Fan is noisy:
  - Ensure all parts are securely assembled and tightened.
  - Check for any obstructions around the fan blades.
• Remote control not working:
  - Replace the AAA batteries in the remote control.
  - Ensure there are no obstructions between the remote and the fan's receiver.

If you experience any issues not covered here, please contact Lasko Customer Support.

7. Specifications

8. Warranty

This Lasko EcoQuiet Oscillating Pedestal Fan (Model S18705) comes with a 2-year limited warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, alteration, or unauthorized repair. Please retain your proof of purchase for warranty claims.

9. Customer Support

For technical assistance, troubleshooting, or warranty inquiries, please contact Lasko Customer Support:

• Website: www.lasko.com
• Phone: Refer to your product packaging or Lasko's official website for the most current contact number.
• Email: Refer to Lasko's official website for customer service email.

Please have your model number (S18705) and proof of purchase ready when contacting support.