Important Safety Information
Please read and understand all instructions before assembly and use. Keep this manual for future reference.
- Anti-Tip Kit: Always install the included anti-tip restraint device to prevent the bookshelf from tipping over, especially in households with children or pets.
- Weight Capacity: Each shelf has a maximum load capacity of 135 lbs (61 kg). Do not exceed this limit. Distribute weight evenly across shelves.
- Level Surface: Place the bookshelf on a flat, level, and stable surface to ensure stability.
- Assembly: Assembly may require two adults. Follow all steps carefully.
- Hardware: Use only the provided hardware. Do not substitute parts.
Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.
Components:
- 5 x MDF Board Shelves
- Metal Frame Components (Vertical Supports, Crossbars)
- Hardware Pack (Screws, Allen Wrench, Anti-Tip Kit, Adjustable Footpads)
Tools Required (Not Included, unless specified):
- Allen Wrench (usually included in hardware pack)
- Phillips Head Screwdriver (for anti-tip kit installation)
- Rubber Mallet (optional, for gentle tapping during assembly)
Setup Instructions
Follow these steps carefully for proper assembly. It is recommended to assemble the bookshelf with two people.
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface to prevent scratches. Refer to the parts list to ensure all pieces are present.
- Assemble the Metal Frames: Connect the vertical metal supports using the provided crossbars and screws. Hand-tighten screws initially.
- Attach Shelves: Secure the MDF board shelves to the assembled metal frames. Ensure the shelves are oriented correctly. Fully tighten all screws once all shelves are in place and the structure is stable.
- Install Anti-Tip Kit: Locate the anti-tip brackets and hardware. Attach one bracket to the top rear of the bookshelf and the other to a wall stud using appropriate wall anchors (if not drilling into a stud). Securely fasten the strap between the two brackets. This step is critical for safety.
Image: Detailed view of the anti-tip bracket securing the bookshelf to the wall.
- Adjust Footpads: Screw the adjustable footpads into the bottom of the metal frame. Adjust them as needed to ensure the bookshelf is level and stable on your floor.
For a visual guide, please refer to the official assembly video:
Video: Official IRONCK assembly guide for the 5-Tier Bookshelf, demonstrating the construction process.
Image: Detailed dimensions of the bookshelf, including height, length, depth, and shelf clearance.
Image: Close-up view illustrating the robust connection between the metal frame and a wooden shelf.
Operating Instructions
- Load Distribution: Distribute items evenly across all shelves. Avoid placing heavy objects solely on one side or one shelf.
- Stability Check: Periodically check the stability of the bookshelf. Ensure all connections are tight and the anti-tip kit is securely fastened.
- Placement: Position the bookshelf in a location where it will not obstruct pathways or be easily bumped.
Image: The assembled bookshelf showcasing its capacity for various items in a home environment.
Maintenance
- Cleaning: Wipe the surfaces with a dry, soft cloth. Avoid using harsh chemicals or abrasive cleaners, which may damage the finish.
- Hardware Check: Periodically inspect all screws and connections to ensure they remain tight. Re-tighten if necessary.
- Environmental Conditions: Avoid exposing the bookshelf to excessive moisture or direct sunlight for prolonged periods, as this may cause warping or fading.
Troubleshooting
- Bookshelf is Wobbly:
- Ensure all screws are fully tightened.
- Adjust the footpads on the bottom of the frame to compensate for uneven flooring.
- Verify the bookshelf is placed on a level surface.
- Confirm the anti-tip kit is properly installed and secured.
- Missing Parts or Damaged Components:
- Carefully re-check all packaging materials.
- Contact IRONCK customer support for assistance.
Specifications
| Feature | Detail |
|---|---|
| Material | MDF Board + Iron Frame |
| Overall Dimensions (D x W x H) | 11.8"D x 71.2"W x 53.1"H (30cm D x 181cm W x 135cm H) |
| Number of Shelves | 5 |
| Shelf Thickness | 1.1 Inches (2.8 cm) |
| Clearance Between Shelves | 14 Inches (35.5 cm) |
| Load Capacity Per Shelf | 135 lbs (61 kg) |
| Product Weight | 49 Grams (Note: This weight may refer to a component, not the full unit. Please refer to packaging for actual shipping weight.) |
| Color | Vintage Brown |
| Mounting Type | Wall Mount (with included anti-tip kit) |
| Assembly Required | Yes |
Warranty Information
IRONCK products are manufactured with quality and care. This product comes with a standard limited warranty against manufacturing defects. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation included with your purchase or contact IRONCK customer support.
Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact IRONCK customer support:
- Website: Visit the official IRONCK website for FAQs and support resources.
- Email: [Insert Customer Service Email Here, if available]
- Phone: [Insert Customer Service Phone Number Here, if available]
Please have your model number (B0B6VZD3DJ) and purchase date ready when contacting support.
