1. Introduction
Thank you for choosing the OVE Decors Sedona Semi-Frameless Sliding Shower Door. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new shower door. Please read all instructions carefully before beginning installation and keep this manual for future reference.
The OVE Sedona shower collection offers a contemporary barn door aesthetic. It features two large satin nickel wheels with vintage-inspired spokes that facilitate the smooth gliding of the 60-inch sliding glass shower doors across a stylish top rail. An oversized flat bar handle complements the industrial design of the OVE Sedona shower doors.
Figure 1: OVE Decors Sedona Semi-Frameless Sliding Shower Door in a bathroom setting.
2. Safety Information
Always follow basic safety precautions when installing or operating this product to reduce the risk of injury, electric shock, fire, or damage to property.
- Read all instructions before installation.
- Wear appropriate personal protective equipment (PPE), including safety glasses and gloves, during installation.
- Ensure the installation area is clear and well-lit.
- Handle glass panels with extreme care. Tempered glass, while strong, can shatter into small pieces if its edges are struck or damaged.
- Do not attempt to install this product alone. Two or more people are recommended for safe handling of glass panels.
- Verify that the wall structure can support the weight of the shower door.
- Use only the hardware provided or specified by the manufacturer.
- Ensure all fasteners are securely tightened before use.
3. Parts List
Before beginning installation, verify that all parts are present and undamaged. Refer to the packaging for a complete list of components. Typical components include:
- Sliding Glass Panels (Clear, 3/8-inch / 10mm thick tempered glass)
- Fixed Glass Panel
- Top Rail/Track (Satin Nickel finish)
- Wall Profiles/Channels
- Rollers/Wheels (Satin Nickel finish)
- Door Handle (Oversized flat bar)
- Seals and Gaskets
- Mounting Hardware (Screws, anchors, washers, etc.)
- Silent Guide
4. Tools Required
The following tools are typically required for the installation of the OVE Decors Sedona Shower Door:
- Measuring Tape
- Pencil
- Level
- Drill
- Drill Bits (appropriate for wall material)
- Screwdriver (Phillips and/or Flathead)
- Caulking Gun and Silicone Sealant (mildew-resistant)
- Utility Knife
- Rubber Mallet (optional, for gentle adjustments)
5. Setup and Installation
Installation should be performed by individuals with experience in home improvement projects. If you are unsure, consult a professional installer.
5.1. Pre-Installation Steps
- Unpack and Inspect: Carefully unpack all components and inspect for any damage. Report any missing or damaged parts to OVE Decors customer service immediately.
- Read Instructions: Thoroughly read this manual and any supplementary installation guides provided with your specific model.
- Prepare Area: Ensure the shower base or curb is level and clean. The wall surfaces where the door will be mounted should be plumb and structurally sound.
- Measure: Accurately measure the width and height of your shower opening. This model is designed for openings 58-in to 60-in wide and 78.75-in high. Out-of-plumb adjustability is provided for simpler installation.
5.2. Installation Procedure (General Steps)
Note: Specific steps may vary slightly based on your exact model. Always refer to the detailed diagram and instructions included in your product packaging.
- Install Wall Profiles: Mark and drill holes for the wall profiles according to the provided template. Secure the wall profiles to the studs or with appropriate anchors.
- Assemble Top Rail: Attach the top rail to the wall profiles, ensuring it is level.
- Install Fixed Glass Panel: Carefully place the fixed glass panel into its designated wall profile and secure it.
- Attach Rollers to Sliding Glass Panel: Mount the rollers to the top edge of the sliding glass panel.
- Hang Sliding Glass Panel: Carefully lift and hang the sliding glass panel onto the top rail, ensuring the rollers engage properly.
- Install Door Handle: Attach the handle to the sliding glass panel.
- Install Seals and Guides: Apply all necessary seals, gaskets, and the silent guide to ensure a watertight enclosure and smooth operation.
- Seal with Silicone: Apply a bead of mildew-resistant silicone sealant along the exterior joints where the wall profiles meet the wall and the base, and any other areas specified in your detailed instructions to prevent leaks. Allow adequate curing time before use.
6. Operating Instructions
The OVE Decors Sedona shower door is designed for smooth and quiet operation.
- To open the door, grasp the handle firmly and slide the door along the top rail.
- To close the door, slide it back until it meets the fixed panel and seals properly.
- Avoid forcing the door if it encounters resistance. Check for obstructions or debris in the track.
7. Maintenance
Regular cleaning and maintenance will ensure the longevity and appearance of your shower door.
7.1. Cleaning Glass Panels
- Clean glass panels regularly with a soft cloth or sponge and a non-abrasive glass cleaner.
- For hard water spots, use a solution of white vinegar and water.
- Avoid abrasive cleaners, scouring pads, or harsh chemicals as they can scratch the glass or damage the finish.
- Wipe down the glass after each use to minimize water spots and soap scum buildup.
7.2. Cleaning Hardware and Seals
- Clean satin nickel hardware with a soft, damp cloth. Do not use abrasive cleaners or polishes that could damage the finish.
- The seals are easy-to-remove for cleaning between the glass panels. Remove them periodically, clean with mild soap and water, and reinsert.
- Keep the top rail and bottom track free of debris, soap residue, and hair to ensure smooth operation of the rollers.
8. Troubleshooting
This section addresses common issues you might encounter with your shower door.
| Problem | Possible Cause | Solution |
|---|---|---|
| Door does not slide smoothly. | Debris in track; rollers dirty or damaged; track misaligned. | Clean track and rollers. Inspect rollers for damage and replace if necessary. Check track alignment and adjust if needed. |
| Water leaks from door. | Seals are worn, misaligned, or missing; silicone sealant failure. | Inspect and adjust or replace seals. Reapply silicone sealant where necessary, ensuring proper curing time. |
| Door rattles. | Silent guide not properly installed or damaged. | Check the silent guide for proper installation and condition. Adjust or replace as needed. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | OVE Decors |
| Model Number | SEDONA-60SNSD |
| Type | Semi-Frameless Sliding Alcove Shower Door |
| Width Adjustment | 58-in to 60-in (147.3 cm to 152.4 cm) |
| Height | 78.75-in (200 cm) |
| Glass Thickness | 3/8-in (10mm) Tempered Glass |
| Glass Type | Clear |
| Hardware Finish | Satin Nickel |
| UPC | 828796016582 |
10. Warranty and Support
For information regarding product warranty, parts replacement, or technical support, please contact OVE Decors customer service directly. Refer to the contact information provided with your product packaging or visit the official OVE Decors website.
Note: No official product videos were available in the provided data for embedding in this manual.
