FLYMEI Patio Egg Chair Cover Instruction Manual

1. Introduction

Thank you for choosing the FLYMEI Patio Egg Chair Cover. This cover is designed to provide comprehensive protection for your single-seat patio egg chair against various outdoor elements. Crafted from durable, weather-resistant materials, it ensures your furniture remains clean and well-preserved season after season.

2. Key Features

• Durable Material: Constructed from 420D woven polyester with a PVC coating, offering waterproof, UV protective, dustproof, scratch-resistant, and stain-resistant properties.
• Universal Fit: Sized at 75" (L) x 45" (W), designed to fit most standard single swinging egg chairs, pod chairs, and swingasan models.
• Windproof Design: Features a bottom drawstring and adjustable buckles to secure the cover firmly, preventing it from being blown away in windy conditions.
• Multi-functional Protection: Shields your furniture from dust, sunlight, rain, and frost, helping to maintain its appearance and extend its lifespan.
• Easy to Use: Equipped with a long zipper for effortless installation and removal. Includes a storage bag for convenient off-season storage.
• UV Protection: Internal silver coating provides enhanced UV protection.

Figure 1: Key protective features of the cover.

3. Setup and Installation

Follow these steps to properly install your FLYMEI Patio Egg Chair Cover:

1. Unpack: Carefully remove the cover from its storage bag.
2. Position: Identify the top and bottom of the cover. The zippered opening should align with the front of your egg chair.
3. Drape: Gently pull the cover over your egg chair, ensuring it fully covers the chair from top to bottom.
4. Zip Up: Close the long zipper completely to secure the front of the cover.
5. Secure: Locate the drawstring at the bottom hem of the cover. Pull the drawstring tight and use the toggle to fasten it securely around the base of the chair. Additionally, fasten any integrated buckles around the chair legs or frame to prevent wind uplift.

Figure 2: Cover dimensions and compatibility with various egg chair types.

Figure 3: Detail of the zipper and securing buckles.

Figure 4: Windproof features: adjustable tie and buckles.

4. Operating Instructions

Using your egg chair cover is straightforward:

• Accessing the Chair: Unzip the front of the cover to easily access your egg chair. You can roll up the unzipped portion and secure it if desired.
• Securing for Protection: When not in use, ensure the zipper is fully closed, the bottom drawstring is tightened, and all buckles are fastened to provide maximum protection against weather and debris.

5. Maintenance

Proper care will extend the life of your egg chair cover:

• Cleaning: Hand wash the cover using a soft brush and mild soap.
• Drying: Hang the cover to air dry completely. Do not use a machine dryer.
• Bleach: Do not use bleach or harsh chemicals, as this may damage the material and coating.
• Storage: When not in use for extended periods, ensure the cover is clean and completely dry before folding and storing it in the provided storage bag. Store in a cool, dry place.

Figure 5: The waterproof capability of the cover material.

6. Troubleshooting

• Cover blows off in wind: Ensure the bottom drawstring is pulled tight and the buckles are securely fastened around the chair's base or legs.
• Water pooling on top: While the cover is waterproof, prolonged pooling of water can occur if not properly draped. Adjust the cover to allow water to run off naturally.
• Mildew or mold growth: This typically occurs if the chair or cover is stored wet. Always ensure both the chair and the cover are completely dry before covering or storing. Clean any mildew promptly with a mild solution as per maintenance instructions.

7. Specifications

8. Warranty and Support

Specific warranty details are not provided in this manual. For warranty information, product support, or any inquiries, please contact FLYMEI customer service directly or visit the official FLYMEI store on Amazon.