onerbl AC Adapter Instruction Manual

1. Introduction

This manual provides essential instructions for the safe and effective use of your onerbl AC Adapter. This adapter is designed as a replacement power source for Power Smith 10-Watt Green Rechargeable LED Work Lights, specifically models PWLR1110F and PWLR1110M. Please read this manual thoroughly before use and retain it for future reference.

2. Safety Information

WARNING: To reduce the risk of fire, electric shock, or injury, observe the following safety precautions:

• Ensure the AC adapter is compatible with your device's voltage and current requirements before connecting. This adapter is specifically for Power Smith 10-Watt LED Work Lights (PWLR1110F, PWLR1110M).
• Do not expose the adapter to rain, moisture, or extreme temperatures.
• Do not operate the adapter if it has been damaged in any way. Inspect the cord and adapter housing for any signs of damage before each use.
• Avoid placing the adapter in areas with poor ventilation. Ensure adequate airflow around the unit during operation.
• Do not attempt to open or modify the adapter. There are no user-serviceable parts inside.
• Keep out of reach of children.
• Always unplug the adapter from the wall outlet before cleaning or when not in use for extended periods.

3. Product Overview

The onerbl AC Adapter provides reliable power for your compatible Power Smith LED Work Light. It features a robust design with built-in safety mechanisms.

Image 1: The onerbl AC Adapter, showing the main unit and its integrated power cable with a barrel connector.

Key Features:

• Worldwide AC Input: Supports AC 100-240V, 50/60Hz for global compatibility.
• Extended Cable Length: Features a 6.5-foot (approximately 76-inch) extra-long cord for flexible placement.
• Multiple Protection: Equipped with a smart chip for safety, including over-voltage protection, over-heat protection, short-circuit protection, and over-current protection.

Image 2: Diagram illustrating the smart chip's multiple protection features: short-circuit, over-voltage, and over-current protection.

Image 3: Visual representation of the AC adapter's dimensions (2.6 inches length, 1.6 inches width, 1.2 inches height) and the cable length (76 inches).

4. Setup

Follow these steps to set up your onerbl AC Adapter:

1. Inspect the Adapter: Before first use, carefully inspect the AC adapter and its cable for any signs of damage. Do not use if damaged.
2. Connect to Work Light: Locate the charging port on your Power Smith 10-Watt Green Rechargeable LED Work Light. Insert the barrel connector of the onerbl AC Adapter firmly into the charging port.
3. Connect to Power Outlet: Plug the AC adapter's wall plug into a standard AC 100-240V wall outlet. Ensure the outlet is easily accessible.

Image 4: The AC adapter plugged into a power strip, demonstrating a typical connection scenario.

5. Operating Instructions

Once connected, the AC adapter will begin to charge your Power Smith LED Work Light. Refer to your work light's instruction manual for specific charging indicators (e.g., LED lights changing color).

• The adapter is designed for continuous use during charging.
• Disconnect the adapter from the wall outlet and the work light once charging is complete or if the work light is not in use.

6. Maintenance

Proper maintenance ensures the longevity and safe operation of your AC adapter:

• Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and moisture. Avoid tightly coiling the cable to prevent damage.
• Inspection: Periodically check the cable and connector for any signs of wear, cuts, or bends. Replace the adapter if any damage is observed.

Image 5: Illustration of the durable design, highlighting the copper wire core and PVC jacket of the cable for enhanced longevity.

7. Troubleshooting

If you encounter issues with your AC adapter, refer to the following common problems and solutions:

• Work Light Not Charging:
  • Ensure the adapter is securely plugged into both the wall outlet and the work light's charging port.
  • Verify that the wall outlet is functional by plugging in another device.
  • Check the adapter cable and connector for any visible damage. If damaged, discontinue use.
  • Confirm that your work light is indeed one of the compatible models (PWLR1110F, PWLR1110M).
• Adapter Feels Warm:
  • It is normal for the adapter to feel slightly warm during operation. If it becomes excessively hot, unplug it immediately and contact customer support.
  • Ensure the adapter is in a well-ventilated area and not covered.

If the problem persists after attempting these troubleshooting steps, please contact customer support.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your original purchase or contact the seller directly. Keep your purchase receipt as proof of purchase.