1. Introduction
Thank you for choosing the Arebos 8.8L Stainless Steel Hot Water Dispenser. This appliance is designed to efficiently heat and maintain the temperature of various beverages, such as tea, coffee, mulled wine, or hot water. Please read this manual carefully before initial use to ensure safe operation and optimal performance. Keep this manual for future reference.
Figure 1: Arebos 8.8L Hot Water Dispenser
2. Safety Instructions
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury.
- Read all instructions before use.
- Do not touch hot surfaces. Use handles and knobs.
- To protect against electrical hazards, do not immerse the cord, plugs, or the appliance in water or other liquids.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
- The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
- Do not use outdoors.
- Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Always attach the plug to the appliance first, then plug the cord into the wall outlet. To disconnect, turn any control to "off," then remove the plug from the wall outlet.
- Do not use the appliance for other than intended use.
- Exercise extreme caution when moving an appliance containing hot liquid.
- Ensure the lid is securely locked during operation to prevent accidental spills.
3. Product Overview
Familiarize yourself with the components of your Arebos Hot Water Dispenser:
Figure 2: Key Features and Components
- Main Unit: Double-wall stainless steel housing for insulation.
- Lid: Stainless steel lid with a locking mechanism for safety.
- Handles: Cool-touch handles for safe transport.
- Tap: Integrated dispensing tap.
- Fill Level Indicator: Clear display to monitor liquid volume.
- Temperature Control Dial: Infinitely adjustable temperature from 30°C to 110°C.
- On/Off Switch: Power control for the appliance.
- Heating Indicator Light: Illuminates when the appliance is actively heating.
- Keep Warm Indicator Light: Illuminates when the appliance is maintaining temperature.
- Drip Tray: Removable tray to catch drips from the tap.
Figure 3: Cool-Touch Handles
Figure 4: Integrated Tap
4. Setup
4.1 Unpacking
- Carefully remove the appliance from its packaging.
- Remove all packaging materials, stickers, and labels.
- Check for any damage during transit. If damaged, do not use and contact customer support.
4.2 Initial Cleaning
- Before first use, clean the interior of the dispenser and all removable parts (lid, drip tray) with warm soapy water.
- Rinse thoroughly with clean water and dry completely.
- Wipe the exterior with a damp cloth. Do not immerse the main unit in water.
4.3 Placement
- Place the dispenser on a stable, flat, heat-resistant surface.
- Ensure there is adequate ventilation around the appliance.
- Keep away from walls, curtains, and other heat-sensitive materials.
- Ensure the power cord is not kinked or trapped.
5. Operating Instructions
5.1 Filling the Dispenser
- Ensure the appliance is unplugged.
- Remove the lid by turning it counter-clockwise to unlock and lifting it off.
- Fill the dispenser with the desired liquid (water, tea, mulled wine, etc.). Do not exceed the MAX fill line indicated on the fill level indicator. The maximum capacity is 8.8 liters.
- Replace the lid and turn it clockwise to securely lock it in place.
Figure 5: Locking the Lid
5.2 Setting the Temperature
- Plug the power cord into a suitable electrical outlet (220-240V).
- Turn the temperature control dial to your desired temperature between 30°C and 110°C.
- Flip the On/Off switch to the 'On' position. The red 'Heating' indicator light will illuminate.
Figure 6: Temperature Control Dial
5.3 Heating and Keep-Warm Function
- Once the desired temperature is reached, the red 'Heating' indicator light will turn off, and the green 'Keep Warm' indicator light will illuminate.
- The appliance will automatically maintain the set temperature. It will cycle between heating and keep-warm modes as needed.
5.4 Dispensing
- Place a cup or mug under the tap.
- Push the tap lever down to dispense the hot liquid.
- Release the lever to stop dispensing.
5.5 Switching Off
- To turn off the appliance, flip the On/Off switch to the 'Off' position.
- Unplug the power cord from the wall outlet.
- Allow the appliance to cool down completely before cleaning or storing.
Figure 7: Versatile Use for Various Beverages
6. Cleaning and Maintenance
Regular cleaning ensures hygiene and extends the lifespan of your dispenser.
6.1 Daily Cleaning
- Always unplug the appliance and allow it to cool completely before cleaning.
- Empty any remaining liquid.
- Remove the lid and drip tray. Wash them with warm soapy water, rinse, and dry.
- Clean the interior of the dispenser with a soft brush or sponge and warm soapy water. Rinse thoroughly, ensuring no soap residue remains.
- Wipe the exterior with a damp cloth. Do not use abrasive cleaners or scouring pads.
- Ensure all parts are completely dry before reassembling or storing.
Figure 8: Cleaning the Removable Drip Tray
6.2 Descaling
Depending on water hardness, mineral deposits (limescale) may build up inside the dispenser. Descale regularly (e.g., monthly or every few months) to maintain efficiency.
- Fill the dispenser with a descaling solution (e.g., white vinegar and water, or a commercial descaler) according to the product instructions.
- Set the temperature to approximately 60-80°C and allow the solution to heat for 30-60 minutes. Do not boil.
- Turn off and unplug the appliance. Let the solution sit for an hour or longer for heavy deposits.
- Empty the solution and rinse the interior thoroughly several times with fresh water.
- Run a cycle with fresh water to remove any residual descaler taste.
7. Troubleshooting
If you encounter issues, refer to the following table before contacting customer support:
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not turn on. | No power supply. | Check if the power cord is securely plugged into the outlet and the On/Off switch is in the 'On' position. Check the circuit breaker. |
| Liquid is not heating. | Temperature dial set too low or heating element malfunction. | Ensure the temperature dial is set to a desired heating temperature. If the issue persists, contact customer support. |
| Liquid is leaking from the tap. | Tap not fully closed or damaged seal. | Ensure the tap lever is fully released. If leaking continues, contact customer support for possible seal replacement. |
| Heating takes too long. | Limescale buildup. | Descale the appliance as described in Section 6.2. |
8. Specifications
- Brand: Arebos
- Model Number: AR-HE-GKE88S
- Capacity: 8.8 Liters
- Power/Wattage: 950 W
- Voltage: 220-240 V
- Temperature Range: 30°C - 110°C (Infinitely adjustable)
- Material: Stainless Steel
- Product Dimensions: 27.2 cm (L) x 27.2 cm (W) x 43.8 cm (H)
- Special Features: Overheating protection, Cool-touch handles, Clear fill level indicator, Lockable lid.
Figure 9: Product Dimensions and Capacity
9. Warranty and Support
Your Arebos Hot Water Dispenser comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including the warranty period and coverage details.
For technical support, service, or warranty claims, please contact the Arebos customer service department. Contact information can typically be found on the product packaging, the official Arebos website, or your purchase receipt.
When contacting support, please have your model number (AR-HE-GKE88S) and proof of purchase readily available.
