SOFTSEA Full Size House Daybed with Trundle Instruction Manual

1. Introduction

Thank you for purchasing the SOFTSEA Full Size House Daybed with Trundle. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new bed frame. Please read these instructions carefully before beginning assembly and retain them for future reference.

This house-shaped daybed is designed to accommodate a full-size mattress on the main bed and a twin-size mattress on the pull-out trundle, offering a versatile sleeping solution with a unique aesthetic.

2. Safety Information

WARNING: Failure to follow these safety instructions could result in serious injury or property damage.

• Always assemble the product on a soft, clean surface to prevent damage to the finish.
• Ensure all parts are securely fastened before use. Periodically check and tighten all connections.
• Do not use power tools for assembly as they may overtighten screws and damage the wood. Use hand tools only.
• Keep small parts and packaging materials away from children during assembly to prevent choking hazards.
• Do not allow children to play on or under the bed without supervision.
• The maximum weight capacity for the main bed is 275 LBS. The maximum weight capacity for the trundle bed is 175 LBS. Do not exceed these limits.
• Use only the recommended mattress thickness: 6"-8" for the main bed and 6" for the trundle.

3. Package Contents

Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support immediately.

• Bed frame components (Plywood, MDF, Pinewood)
• Bed slats for main bed (8 slats)
• Bed slats for trundle (7 slats)
• Hardware pack (screws, bolts, nuts, etc.)
• Assembly tools (screwdriver, Allen wrench)

The product is shipped in 2 packages. Total package weight is approximately 205 LBS.

4. Setup and Assembly Instructions

Estimated Assembly Time: 1 hour

Suggested Number of People for Assembly: 2

Tools Required: All tools are included (screwdriver, Allen wrench).

Important: Avoid using power tools during assembly.

4.1 Pre-Assembly Checklist

• Clear a spacious area for assembly.
• Lay out all parts and hardware on a soft, clean surface.
• Identify each component using the provided parts list (refer to the diagram below for overall dimensions).

This diagram illustrates the overall dimensions of the house daybed and its trundle, including length, width, and height measurements for both the main bed and the pull-out trundle.

4.2 Assembly Steps (General Guidance)

1. Begin by assembling the main bed frame structure. Connect the headboard, footboard, and side rails using the provided hardware.
2. Attach the house-shaped roof and window frame components to the main bed structure.
3. Install the bed slats for the main full-size bed. Ensure they are evenly spaced and securely fastened.
4. Assemble the trundle bed frame. Attach the trundle side rails and end pieces.
5. Install the bed slats for the twin-size trundle.
6. Slide the assembled trundle bed underneath the main daybed frame. The trundle is designed to be installed on either side of the main bed.
7. Once fully assembled, double-check all connections to ensure they are tight and secure.

An assembled view of the SOFTSEA Full Size House Daybed with Trundle, showcasing its house-shaped design and the integrated pull-out trundle bed. The bed is shown in a gray finish within a decorated room.

5. Operating Instructions

5.1 Using the Trundle Bed

The trundle bed is designed for easy access and storage. To use the trundle:

1. Gently pull the trundle bed out from underneath the main daybed frame. It is equipped with wheels for smooth movement.
2. Position the trundle bed as desired for use.
3. To store the trundle, push it back underneath the main daybed until it is fully recessed.

This image provides a detailed view of how the trundle bed connects to the main daybed frame, highlighting the wheels and the structural support for smooth operation.

6. Maintenance

• Cleaning: Wipe the bed frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
• Hardware Check: Periodically (e.g., every 3-6 months) inspect all bolts, screws, and connections. Tighten any loose hardware to ensure stability and safety.
• Mattress Care: Follow the care instructions provided with your mattress. Rotate and flip mattresses regularly as recommended.

7. Troubleshooting

• Bed feels wobbly: Ensure all bolts and screws are tightened. Re-check assembly steps to confirm all parts are correctly installed.
• Trundle does not slide smoothly: Check for any obstructions underneath the bed. Ensure the trundle wheels are clean and free of debris.
• Squeaking noises: Tighten all hardware. If squeaking persists, apply a small amount of lubricant (e.g., silicone spray) to metal-on-metal contact points, avoiding wood surfaces.

8. Specifications

A front-facing view of the bed frame, illustrating the slat system for both the main full-size bed and the twin-size trundle, confirming no box spring is needed.

9. Warranty

This SOFTSEA product comes with a One Year Manufacturer Defect Warranty. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage resulting from improper assembly, misuse, abuse, accidents, or normal wear and tear. Please retain your proof of purchase for warranty claims.

10. Customer Support

If you have any questions regarding the assembly, operation, or maintenance of your SOFTSEA Full Size House Daybed with Trundle, or if you require assistance with missing or damaged parts, please contact the manufacturer or your retailer for support. Provide your model number (P803) and purchase details when contacting support to ensure efficient service.