Introduction
Welcome to the user manual for your Soundcore Space Q45 Adaptive Active Noise Cancelling Headphones. These headphones are designed to provide an immersive audio experience with advanced noise cancellation, long playtime, and comfortable fit. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your device.
What's in the Box
- Soundcore Space Q45 Headphone x1
- USB-C Cable x1
- AUX Cable x1
- Protective Case x1
Product Overview
The Soundcore Space Q45 headphones feature a sleek design with intuitive controls and advanced audio technology.

Figure 1: Soundcore Space Q45 Headphones, showcasing their over-ear design and black finish.

Figure 2: User experiencing personal space with 50 hours of playtime, ideal for travel.

Figure 3: Visual representation of the 3-stage noise cancelling system, reducing noise by up to 98%.

Figure 4: Adaptive Noise Cancelling automatically adjusts to your environment, whether commuting, flying, or indoors.

Figure 5: Double-layer diaphragm drivers deliver detail-rich sound with intense bass and crisp treble, supporting LDAC for Hi-Res Audio Wireless.

Figure 6: The ergonomic design and comfortable fit ensure a harmonious wearing experience.

Figure 7: The Soundcore app provides comprehensive control over sound settings, noise cancellation levels, and more.
Setup
1. Charging Your Headphones
Before first use, fully charge your Soundcore Space Q45 headphones. Connect the provided USB-C cable to the charging port on the headphones and to a power source. The LED indicator will show charging status. A full charge takes approximately 2 hours.
2. Powering On/Off
To power on, press and hold the Power button until the LED indicator lights up. To power off, press and hold the Power button again until the LED indicator turns off.
3. Bluetooth Pairing
- With the headphones powered off, press and hold the Power button for 3 seconds until the LED indicator flashes blue, indicating pairing mode.
- On your device (smartphone, laptop, etc.), enable Bluetooth and search for "Soundcore Space Q45" in the list of available devices.
- Select the headphones to connect. Once connected, the LED indicator will turn solid blue.
4. Multi-Point Connection
The Space Q45 supports connecting to two Bluetooth devices simultaneously. After connecting to the first device, disable Bluetooth on that device. The headphones will re-enter pairing mode. Connect to the second device. Then, re-enable Bluetooth on the first device and select "Soundcore Space Q45" to connect. You can now switch between devices without re-pairing.
Operating Instructions
1. Noise Control Modes
The Space Q45 offers three noise control modes: Active Noise Cancellation (ANC), Transparency, and Normal. Press the NC button on the left earcup to cycle through these modes.
- Active Noise Cancellation (ANC): Reduces ambient noise by up to 98%. Ideal for noisy environments like airplanes or busy commutes.
- Transparency Mode: Allows you to hear your surroundings while still enjoying your audio. Useful for staying aware of your environment.
- Normal Mode: Standard audio playback without noise cancellation or transparency.
You can customize the intensity of ANC and Transparency modes, and select adaptive noise cancelling via the Soundcore app.
2. Music Playback
- Play/Pause: Press the Multi-function button (center button on right earcup).
- Next Track: Press and hold the Volume Up button.
- Previous Track: Press and hold the Volume Down button.
- Volume Up/Down: Short press the Volume Up/Down buttons.
3. Phone Calls
- Answer/End Call: Press the Multi-function button.
- Reject Call: Press and hold the Multi-function button for 2 seconds.
- Switch Between Calls: During a call, press the Multi-function button to switch to an incoming call.
4. Voice Assistant
Press the Multi-function button twice to activate your device's voice assistant (e.g., Siri, Google Assistant).
5. Soundcore App
Download the Soundcore app from your device's app store to unlock the full potential of your Space Q45 headphones. The app allows you to:
- Customize EQ settings with HearID or preset modes.
- Adjust noise cancellation levels and adaptive settings.
- Update firmware.
- Enable LDAC for Hi-Res Audio Wireless (Android devices only).
- Set auto-power-off timers.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your Soundcore Space Q45 headphones.
- Cleaning: Use a soft, dry cloth to clean the earcups and headband. Do not use harsh chemicals or abrasive materials.
- Storage: When not in use, store the headphones in their protective case to prevent damage from dust, scratches, and impacts.
- Avoid Moisture: The headphones are not water-resistant. Avoid exposure to water, rain, or excessive humidity.
- Temperature: Do not expose the headphones to extreme temperatures (hot or cold) as this can affect battery life and overall performance.
Troubleshooting
| Problem | Solution |
|---|---|
| Cannot power on | Ensure the headphones are charged. Connect to a power source using the USB-C cable. |
| Cannot pair with device | Ensure Bluetooth is enabled on your device. Place headphones in pairing mode (flashing blue LED). Move headphones closer to your device. Clear previous Bluetooth connections on your device. |
| No sound or low volume | Adjust volume on both headphones and connected device. Ensure headphones are properly connected. Try re-pairing. |
| Poor sound quality | Move closer to your device to avoid interference. Try disabling LDAC in the Soundcore app if experiencing connection issues. |
| Noise Cancellation not effective | Ensure ANC mode is activated. Adjust ANC level in the Soundcore app. Ensure earcups form a good seal around your ears. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | Space Q45 |
| Model Number | A3040 |
| Connectivity Technology | Wireless (Bluetooth 5.3) |
| Noise Control | Active Noise Cancellation |
| Audio Driver Type | Dynamic Driver (40mm double-layer diaphragm) |
| Frequency Range | 20Hz - 20,000Hz |
| Impedance | 16 Ohm |
| Sensitivity | 93 dB |
| Battery Life (ANC On) | Up to 50 hours |
| Battery Life (Normal Mode) | Up to 65 hours |
| Charging Time | 2 Hours (5 min charge for 4 hours playtime) |
| Headphones Jack | 3.5 mm Jack (for wired connection) |
| Control Type | App Control, Physical Buttons |
| Item Weight | 9.9 ounces (approx. 280g) |
| Product Dimensions | 6.34 x 3.46 x 7.44 inches |
| Material | Aluminum, Leather, Plastic |
Warranty and Support
Soundcore products come with a limited warranty. For detailed warranty information, product registration, and technical support, please visit the official Soundcore website or contact their customer service. You can also find FAQs and additional resources on the Soundcore Store on Amazon.