1. Introduction
Thank you for choosing the Rolanstar TV Stand. This modern entertainment center is designed to enhance your living space with its integrated RGB LED lighting, convenient power outlets, and ample storage solutions. It is suitable for TVs ranging from 30 to 65 inches and features a unique sliding rail door for easy access to your media devices. This manual provides essential information for safe assembly, operation, and maintenance of your new TV stand.

Figure 1.1: Rolanstar TV Stand with LED Lights
2. Safety Information
WARNING: This product requires assembly. Always follow the provided instructions for safe assembly. Do not exceed the stated weight limits to prevent tip-over or damage. Keep wires and cables organized and away from heat sources to prevent fire hazards. Keep small parts and sharp edges out of reach of children.
3. Package Contents
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- All necessary engineered wood panels
- Assembly hardware (screws, dowels, cam locks, etc.)
- RGB LED light strip with RF remote control
- 4 AC outlets power strip
- Sliding rail door mechanism
- L-shaped stable bases
- Instruction manual
4. Setup and Assembly
Assembly typically requires two adults. Ensure you have a clear, spacious area to work in. Follow the numbered steps in the included instruction booklet carefully. Do not overtighten screws.

Figure 4.1: Product Dimensions
Assembly Video Guide
For visual assistance during assembly, please refer to the official video below:
Video 4.2: Gaming TV Stand DIY Your Life. This video demonstrates the assembly process and features of the TV stand.
5. Operating Instructions
5.1. LED Lights Operation
The integrated RGB LED light strip provides customizable ambient lighting. Use the included RF remote control to adjust settings.
- Power On/Off: Press the power button on the remote.
- Color Selection: Choose from 20 main colors using the color buttons.
- Dynamic Modes: Select from 21 dynamic modes (e.g., flash, fade, strobe) to create different effects.
- Brightness/Speed Adjustment: Use the dedicated buttons to increase or decrease brightness and mode speed.

Figure 5.1: LED Lights and Remote Control
5.2. Power Outlet Usage
The TV stand includes a built-in power strip with 4 AC outlets for convenient charging and powering of your devices.
- Plug the TV stand's main power cord into a wall outlet.
- Connect your TV, gaming consoles, chargers, and other electronics to the integrated AC outlets.

Figure 5.2: Integrated Power Outlets
5.3. Storage and Sliding Rail Door
The TV stand features ample storage space with cabinet doors and a unique sliding rail door in the middle for enhanced accessibility. The back wire holes help organize cables.
- Utilize the side cabinets for concealed storage of items like DVDs, CDs, and remote controls.
- The central compartment with the sliding rail door is ideal for media equipment such as game consoles or soundbars.
- To open the sliding door, gently press it to activate the magnetic touch latch, and it will pop open, allowing you to slide it along the rail.

Figure 5.3: Concealed Storage Space

Figure 5.4: Unique Sliding Rail Door Operation
6. Maintenance
To ensure the longevity and appearance of your Rolanstar TV Stand, follow these simple maintenance guidelines:
- Cleaning: Wipe surfaces with a damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
- Dusting: Regularly dust the surfaces with a soft, dry cloth.
- Spills: Clean up spills immediately to prevent staining or damage to the engineered wood.
- Stability Check: Periodically check all screws and fasteners to ensure they remain tight. Retighten if necessary.
- Cable Management: Keep cables organized using the designated wire holes to prevent tangles and reduce dust accumulation.
7. Troubleshooting
If you encounter any issues with your TV stand, please refer to the following common troubleshooting steps:
- LED Lights Not Working:
- Ensure the LED strip is properly connected to the power source.
- Check if the remote control battery needs replacement.
- Verify that the power outlet is functioning correctly.
- Assembly Difficulties:
- Double-check the instruction manual for any missed steps or incorrect part orientation.
- Ensure all hardware is correctly identified and used in the designated locations.
- Do not force parts together; if they don't fit, re-examine the instructions.
- Stability Issues:
- Confirm that all screws and fasteners are fully tightened.
- Ensure the TV stand is placed on a flat, level surface.
- Verify that the L-shaped stable bases are correctly installed.
- Sliding Door Not Operating Smoothly:
- Check the sliding rail for any obstructions or debris.
- Ensure the magnetic touch latch mechanism is clean and unobstructed.
If the problem persists after attempting these steps, please contact Rolanstar customer support for further assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Rolanstar |
| Model Number | hq-dshg017-02 |
| Product Dimensions | 59 x 13.4 x 17.7 inches |
| Item Weight | 62.7 pounds |
| Material | Engineered Wood |
| Color | Black |
| Special Feature | LED Lights & Power Outlet |
| Product Care Instructions | Wipe with Damp Cloth |
| Country of Origin | China |
| UPC | 810142980562 |
9. Warranty and Support
Rolanstar is committed to providing high-quality products and customer satisfaction. This product comes with standard manufacturer support.
- Returns: Enjoy 30-day easy returns.
- Protection Plans: Extended protection plans are available for purchase separately.
- Customer Support: For any questions, concerns, or assistance with your product, please contact Rolanstar customer support through the retailer's platform or the official brand website.





