1. Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Lenco MC-460 Hi-Fi System. The MC-460 is a versatile audio system featuring a turntable, DAB+, Internet, and FM radio, a CD/MP3 player, USB playback, Bluetooth 5.0 connectivity, and an auxiliary input. Please read this manual thoroughly before using the device to ensure proper operation and to maximize your listening experience.
2. Safety Instructions
To ensure safe operation and prevent damage, please observe the following safety precautions:
- Do not expose the unit to rain or moisture.
- Do not block ventilation openings.
- Ensure proper power supply voltage as indicated on the unit.
- Protect the power cord from being walked on or pinched.
- Unplug the unit during lightning storms or when unused for long periods.
- Refer all servicing to qualified service personnel.
- Avoid placing the unit near heat sources or in direct sunlight.
- Keep the unit away from strong magnetic fields.
3. Package Contents
Verify that all items are present in the package:
- Lenco MC-460 Main Unit (Turntable, CD Player, Radio)
- 2 x External Speakers (20W RMS each)
- Remote Control
- Power Cable
- User Manual
- Stylus (pre-installed on turntable)
4. Product Overview
4.1 Front Panel and Controls
The front panel provides access to various functions and controls for the system.
Image 4.1: Front panel of the Lenco MC-460. This image displays the central unit with its digital display, various control buttons for playback and mode selection, a large volume knob on the right, and a USB port located below the volume knob.
- Display: 2.8" TFT LCD screen for status and menu navigation.
- Power Button: Turns the unit on/off.
- Mode Button: Selects between Turntable, CD, Internet Radio, DAB+, FM, Bluetooth, USB, and AUX modes.
- Volume Knob: Adjusts the master volume.
- Navigation Buttons (Menu, Preset, Record, Play/Pause, Skip): Used for menu navigation, station presets, recording functions, and media playback control.
- USB Port: For connecting USB storage devices.
- Headphone Jack (3.5mm): For private listening.
4.2 Rear Panel Connections
The rear panel houses all necessary input and output connections.
Image 4.2: Rear panel of the Lenco MC-460. This image shows the AC power input, Line Out (RCA) ports, AUX In (RCA) ports, and the red and black terminals for connecting the external speakers.
- AC 110-240V Input: For connecting the power cable.
- LINE OUT (RCA): For connecting to an external amplifier or powered speakers.
- AUX IN (RCA): For connecting external audio sources.
- Speaker Terminals (R/L): For connecting the included external speakers.
- FM/DAB+ Antenna: Integrated telescopic antenna for radio reception.
5. Setup
Follow these steps to set up your Lenco MC-460 system:
- Placement: Place the main unit on a stable, flat surface. Position the external speakers on either side of the main unit, ensuring they are at an appropriate distance for optimal stereo separation.
- Connect Speakers: Connect the speaker wires from the external speakers to the corresponding speaker terminals on the rear of the main unit. Ensure correct polarity (red to red, black to black).
- Connect Power: Plug the power cable into the AC input on the rear of the unit, then plug the other end into a wall outlet.
- Antenna: Extend the telescopic antenna for optimal FM/DAB+ radio reception. For Internet Radio, ensure the unit is connected to a Wi-Fi network (see Section 6.4).
- Initial Power On: Press the Power button on the front panel or remote control to turn on the unit. The display will light up.
Image 5.1: The Lenco MC-460 system fully assembled with main unit, two external speakers, and remote control. This image illustrates the complete setup of the product.
6. Operating Instructions
6.1 General Operation
- Power On/Off: Press the Power button.
- Select Mode: Press the Mode button repeatedly to cycle through available sources (Turntable, CD, Internet Radio, DAB+, FM, Bluetooth, USB, AUX).
- Adjust Volume: Rotate the Volume knob or use the VOL+ / VOL- buttons on the remote control.
- Menu Navigation: Use the Menu button and navigation controls (Up/Down, Enter/Scan) to browse options on the display.
6.2 Turntable Operation
- Select Turntable mode.
- Open the dust cover.
- Place a record on the platter.
- Select the appropriate speed (33, 45, or 78 RPM) using the speed selector switch, if available (refer to unit for exact location).
- Carefully lift the tonearm using the cueing lever and position the stylus over the desired track.
- Lower the tonearm gently onto the record using the cueing lever.
- At the end of the record, lift the tonearm and return it to its rest.
6.3 CD Player Operation
Image 6.1: Detail of the Lenco MC-460's CD player. A compact disc is shown partially inserted into the slot-loading mechanism, with playback controls visible below the display.
- Select CD mode.
- Insert a CD into the CD slot with the label side facing up. The unit will automatically load the disc.
- Playback should begin automatically. If not, press the Play/Pause button.
- Use the Skip buttons to navigate between tracks.
- Press the Stop button to end playback.
6.4 Radio Operation (Internet, DAB+, FM)
- Select Internet Radio, DAB+, or FM mode.
- For Internet Radio:
- The first time you use Internet Radio, you will be prompted to connect to a Wi-Fi network. Follow the on-screen instructions to select your network and enter the password.
- Once connected, use the navigation buttons to browse stations by genre, location, or search.
- For DAB+ / FM Radio:
- Perform an auto-scan to find available stations (refer to the on-screen menu for the "Scan" option).
- Use the Skip buttons to tune to the next/previous station.
- Preset Stations: To save a station, press and hold the Preset button. Use navigation to select a preset number and press Enter to confirm. To recall a preset, briefly press the Preset button and select the desired station.
6.5 Bluetooth Operation
- Select Bluetooth mode. The display will show "Pairing" or "Waiting for connection".
- On your smartphone or tablet, enable Bluetooth and search for available devices.
- Select "Lenco MC-460" from the list of devices.
- Once paired, you can play audio from your device through the MC-460 speakers.
- Use your connected device or the MC-460's playback controls to manage audio.
6.6 USB Playback
Image 6.2: The USB port on the Lenco MC-460, shown with a Lenco-branded USB flash drive inserted. This port allows for playback of digital audio files.
- Insert a USB storage device (e.g., USB flash drive) into the USB port on the front panel.
- Select USB mode.
- The unit will scan the USB device for compatible audio files (e.g., MP3).
- Use the navigation and playback buttons to select and play desired tracks.
6.7 AUX Input
- Connect an external audio device (e.g., MP3 player, smartphone) to the AUX IN ports on the rear panel using an appropriate RCA audio cable.
- Select AUX mode.
- Play audio from your connected external device. The sound will be output through the MC-460 speakers.
7. Maintenance
- Cleaning the Unit: Use a soft, dry cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents.
- Dust Cover: Keep the dust cover closed when the turntable is not in use to protect the platter and stylus from dust.
- Stylus Care: Gently clean the stylus periodically with a soft brush designed for stylus cleaning, brushing from back to front. Avoid touching the stylus with your fingers.
- Stylus Replacement: The stylus (MMC AT-3600) has a limited lifespan. Replace it when you notice a degradation in sound quality or visible wear. Consult your dealer for replacement styli.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable not connected; power outlet not active. | Check power cable connection; try a different outlet. |
| No sound from speakers | Volume too low; incorrect mode selected; speakers not connected properly. | Increase volume; select correct input mode; check speaker wire connections. |
| Turntable not spinning or playing | Turntable mode not selected; belt dislodged; stylus damaged. | Ensure Turntable mode is active; inspect and re-seat drive belt; replace stylus if damaged. |
| CD not playing | CD inserted incorrectly; disc scratched/dirty; CD mode not selected. | Re-insert CD correctly; clean or replace disc; select CD mode. |
| Poor radio reception | Antenna not extended; weak Wi-Fi signal (Internet Radio); interference. | Extend antenna fully; check Wi-Fi connection/router; reposition unit away from other electronics. |
| Bluetooth pairing issues | Device not in pairing mode; MC-460 not in Bluetooth mode; device too far. | Ensure both devices are in pairing mode; select Bluetooth mode on MC-460; move devices closer. |
9. Specifications
- Brand: Lenco
- Model: MC-460
- Color: Black
- Output Power: 2 x 20W RMS (Speakers)
- Turntable Cartridge: MMC AT-3600
- Supported Speeds: 33, 45, 78 RPM
- Connectivity: Bluetooth 5.0, Wi-Fi (for Internet Radio)
- Radio Tuner: Internet Radio, DAB+, FM
- Media Playback: CD/MP3, USB
- Inputs: AUX IN (RCA)
- Outputs: LINE OUT (RCA), 3.5mm Headphone Jack
- Display: 2.8" TFT LCD
- Motor Type: Belt Drive
- Power Consumption: 20 Watt
10. Warranty and Support
Lenco products are manufactured to high quality standards. In the unlikely event of a defect, Lenco provides a warranty in accordance with European laws, which commences on the date of purchase. This warranty does not cover damage caused by improper use, normal wear and tear, or unauthorized modifications.
For technical support, service, or warranty claims, please contact your retailer or visit the official Lenco website for further assistance and contact information.
