1. Introduction
The EVGATSAUTO Iprog Pro V87 is a professional, advanced multifunctional ECU programming tool designed for comprehensive automotive diagnostics and programming. This device integrates specialized functions for various vehicle systems, enabling detailed analysis and modification. This manual provides essential information for the safe and effective use of your Iprog Pro V87 programmer.
Image 1.1: The EVGATSAUTO Iprog Pro V87 main unit, shown with a car in the background, highlighting its diagnostic capabilities.
2. Safety Information
Please read and understand all safety warnings and instructions before operating this device. Failure to do so may result in injury, damage to the device, or damage to the vehicle.
- Always operate the device in a well-ventilated area.
- Ensure the vehicle's battery is adequately charged before performing any programming or diagnostic procedures.
- Avoid contact with moving engine parts or hot surfaces.
- Do not expose the device to moisture, extreme temperatures, or direct sunlight.
- Use only the provided cables and adapters.
- Disconnect the device from the vehicle and computer when not in use.
- Keep out of reach of children.
3. Package Contents
Verify that all items listed below are included in your package:
- Iprog Pro V87 Main Unit
- RFID Adapter
- EEPROM Adapter
- UART MBUS BDM Adapter
- DB44 Adapter
- CAN Adapter
- K-line Adapter
- OBD Cable
- USB Cable
- Welding Line
- Software CD
Image 3.1: The Iprog Pro V87 main unit displayed with a selection of adapter boards.
Image 3.2: A detailed view of the different adapter boards included with the Iprog Pro V87.
Image 3.3: The OBD and DB44 connection cable, used to link the programmer to the vehicle.
Image 3.4: The welding line, featuring multiple colored wires for specific connections during programming tasks.
4. Product Features
The Iprog Pro V87 offers a wide range of functionalities for automotive professionals:
- Advanced Multifunctional Programming: Integrates specialized functions for SRS, dashboard, car radio, ECU, EEPROM, IMMO, and MCU systems.
- Special Capabilities: Supports DPF OFF, odometer adjustment, and key unlocking.
- SRS Diagnostic Functions: Ability to read and clear crash records in airbag systems, delete Diagnostic Trouble Codes (DTCs), and repair Configuration Files (CFG).
- Chip and Key Programming: Allows programming and copying of chips for cars and trucks, unlocking keys, preparing smart keys, and writing keys via IMMO dump. Supports reading and writing chips from brands such as Atmel, Fujitsu, Microchip, and V850.
- Comprehensive Adapter Kit: Includes 7 specialized adapters (RFID, EEPROM, UART MBUS BDM, DB44, CAN, K-line) along with OBD and USB cables, a welding line, and software.
5. System Requirements
The Iprog Pro V87 software is compatible with the following operating systems:
- Windows XP
- Windows Vista
- Windows 7
- Windows 8
6. Setup Guide
6.1. Software Installation
- Insert the provided Software CD into your computer's CD/DVD drive.
- Follow the on-screen instructions to install the Iprog Pro V87 software and drivers.
- Restart your computer after installation is complete.
6.2. Hardware Connection
Refer to the connection diagram for proper setup:
Image 6.1: A comprehensive connection diagram illustrating how to connect the Iprog Pro V87 main unit to a laptop, the vehicle's OBD port, and various programming adapters (BDM, EEPROM, Key Prog).
- Connect the Iprog Pro V87 main unit to your computer using the provided USB cable.
- For vehicle diagnostics, connect the OBD cable to the main unit and then to the vehicle's OBD-II port.
- For specific programming tasks (e.g., EEPROM, Key Programming, BDM), select the appropriate adapter from the kit. Connect the adapter to the main unit and then to the target component (e.g., chip, key, ECU).
- Ensure all connections are secure before proceeding.
7. Operating Instructions
7.1. General Operation
- Launch the Iprog Pro V87 software on your computer.
- Select the desired function from the software interface (e.g., SRS, Dashboard, IMMO).
- Follow the on-screen prompts and instructions specific to the chosen function.
- Always ensure the vehicle's ignition is in the correct position as required by the software (e.g., ON, ACC, OFF).
7.2. SRS Diagnostic Procedures
- Connect the Iprog Pro V87 to the vehicle via the OBD cable.
- In the software, navigate to the SRS section.
- Select the option to Read Crash Records to view stored accident data.
- To clear fault codes, select Clear DTCs.
- For repairing configuration files, use the Repair CFG Files function as instructed by the software.
7.3. Key Programming
- Identify the type of key or chip to be programmed.
- Connect the appropriate adapter (e.g., EEPROM adapter for chip reading/writing, RFID adapter for key identification) to the main unit.
- Place the key or chip into the adapter's designated slot or connect it using the welding line if required.
- Follow the software's instructions for Programming/Copying Chips, Unlocking Keys, or Preparing Smart Keys.
8. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents.
- Storage: Store the Iprog Pro V87 and its accessories in a cool, dry place, away from direct sunlight and extreme temperatures.
- Cable Care: Inspect cables and connectors regularly for damage. Replace any damaged components immediately.
- Software Updates: Periodically check the manufacturer's website for software updates to ensure optimal performance and compatibility with new vehicle models.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on | Loose USB connection, faulty USB port, software not installed correctly. | Check USB cable connection. Try a different USB port. Reinstall software and drivers. |
| Software not detecting device | Drivers not installed, incorrect USB port, software conflict. | Ensure drivers are installed. Try a different USB port. Close other diagnostic software. |
| Communication error with vehicle | Loose OBD connection, vehicle ignition off, incompatible protocol, low vehicle battery. | Check OBD cable connection. Turn vehicle ignition ON. Verify vehicle compatibility. Charge vehicle battery. |
| Programming failure | Incorrect adapter, unstable power supply, incorrect procedure, corrupted data. | Ensure correct adapter is used. Maintain stable power. Follow instructions precisely. Contact support if data corruption is suspected. |
10. Specifications
| Feature | Detail |
|---|---|
| Brand | EVGATSAUTO |
| Model Number | EVGATSAUTOmihupv6ko43108 |
| Power Source | Battery Powered (via vehicle OBD or USB) |
| Operating System Compatibility | Windows XP, Vista, 7, 8 |
| Automotive Fit Type | Universal Fit |
| Number of Items | 1 (Main Unit) |
| Functions Supported | SRS, Dashboard, Car Radio, ECU, EEPROM, IMMO, MCU, DPF OFF, Odometer Adjustment, Key Unlocking |
11. Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact EVGATSAUTO customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
Contact Information: Please visit the official EVGATSAUTO website or refer to the contact details provided in your product packaging for support.