Introduction
This manual provides instructions for the proper use and maintenance of your onerbl replacement car power cord, designed for compatibility with Whistler 1510, 1530, and 1540 radar detectors. Please read this manual thoroughly before use to ensure optimal performance and safety.
Image 1: The onerbl replacement car power cord, featuring a cigarette lighter plug and a barrel connector.
Setup
- Identify Ports: Locate the 12V accessory power outlet (cigarette lighter socket) in your vehicle and the power input port on your Whistler radar detector.
- Connect to Radar Detector: Insert the small barrel connector end of the onerbl power cord into the power input port of your Whistler 1510, 1530, or 1540 radar detector. Ensure a snug fit.
- Connect to Vehicle Power: Insert the larger cigarette lighter plug end of the onerbl power cord into your vehicle's 12V accessory power outlet.
- Verify Power: Once connected, your radar detector should power on, indicated by its display or indicator lights. If it does not, check all connections and ensure your vehicle's power outlet is active.
Operating Instructions
The onerbl replacement car power cord functions as a direct power supply for your compatible Whistler radar detector. Once properly connected, it continuously provides the necessary power from your vehicle's 12V or 24V system to the radar detector.
- Ensure the power cord is securely plugged into both the vehicle's power outlet and the radar detector.
- The cord is designed for continuous use while the vehicle is operating.
- Disconnect the cord from the vehicle's power outlet when not in use for extended periods to prevent battery drain, especially if your vehicle's outlet remains active when the ignition is off.
Maintenance and Care
To ensure the longevity and reliable performance of your power cord, follow these simple maintenance guidelines:
- Keep Clean: Periodically wipe the cord and connectors with a dry, soft cloth to remove dust and debris.
- Avoid Damage: Do not bend, twist, or pull the cord excessively, especially near the connectors, as this can damage internal wiring.
- Storage: When not in use, coil the cord loosely and store it in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspect Regularly: Before each use, visually inspect the cord for any signs of wear, fraying, or damage to the insulation or connectors. Discontinue use if damage is observed.
Image 2: Illustration highlighting the quality control, durable design, copper wire, and PVC jacket construction of the power cord.
Troubleshooting
If your radar detector does not power on or function correctly after connecting the onerbl power cord, consider the following:
- No Power to Radar Detector:
- Ensure the power cord is fully inserted into both the vehicle's 12V outlet and the radar detector's power port.
- Check if your vehicle's 12V outlet is receiving power. Some outlets only activate when the ignition is on. Test with another known-working device if possible.
- Inspect the fuse in your vehicle's 12V outlet circuit. Consult your vehicle's owner's manual for fuse box location and replacement instructions.
- Verify that the radar detector itself is functioning correctly by testing it with its original power cord, if available.
- Intermittent Power:
- Ensure connections are secure and free from debris. A loose connection can cause intermittent power.
- Check for any visible damage to the cord or connectors that might cause an unstable connection.
Image 3: Diagram illustrating the smart chip with multiple protection features, including short-circuit, over-voltage, and over-current protection.
Specifications
| Feature | Description |
|---|---|
| Input Voltage | 12V - 24V DC |
| Output Voltage | Compatible with Whistler 1510, 1530, 1540 Radar Detectors |
| Protection Features | Over Voltage Protection, Over Heat Protection, Short-circuit Protection, Over-current Protection |
| Cable Length | Approximately 10 feet (3 meters) |
| Main Power Connector Type | 2 Pin (Cigarette Lighter Plug) |
| Item Weight | 8 ounces (approx. 227 grams) |
Image 4: Visual representation of the extended cord design, indicating a 10 ft cable length for flexible placement.
Warranty and Support
For information regarding warranty coverage, returns, or technical support for your onerbl replacement car power cord, please refer to the seller's policies or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.
Manufacturer: Shenzhen Waweis Technology Co., Ltd
