FONOBO Smart Window Cleaner Robot User Manual

1. Introduction

Thank you for choosing the FONOBO Smart Window Cleaner Robot. This device is designed to simplify the cleaning of various glass surfaces, including windows, tiles, and mirrors. It features advanced technology for efficient and safe operation. Please read this manual thoroughly before using the robot to ensure proper operation and maintenance.

2. Safety Information

Your safety is paramount. Adhere to the following guidelines to prevent injury or damage to the device.

• Power Connection: The robot must always be connected to a power source during operation. The built-in UPS (Uninterruptible Power System) serves as a backup power supply for approximately 50 minutes in case of a power outage, preventing the robot from falling.
• Safety Rope: Always attach the provided safety rope to a secure anchor point before placing the robot on any vertical surface. This is a critical safety measure.
• Surface Condition: Ensure the cleaning surface is free from large debris or sharp objects that could damage the robot or cause it to lose suction.
• Moisture Control: Avoid oversaturating cleaning pads, as excessive moisture can reduce suction power.
• Operating Environment: Do not use the robot in extreme weather conditions (e.g., heavy rain, strong winds) or on severely damaged glass.
• Children and Pets: Keep children and pets away from the robot during operation.

Image: The FONOBO Smart Window Cleaner Robot offers a safe alternative to manual window cleaning, especially for high or hard-to-reach areas. The image shows the robot operating safely indoors, while other panels depict hazardous manual cleaning methods.

3. Package Contents

Verify that all items are present in the package:

• 1 x Window Cleaner Robot
• 8 x Cleaning Pads
• 1 x Remote Control
• 1 x Power Adapter
• 1 x AC Power Cord
• 1 x 5M/16.4ft Safety Rope
• 4 x Cleaning Rings
• 1 x English User Manual
• 1 x Water Bottle

Image: A visual representation of the FONOBO Smart Window Cleaner Robot and all its accessories, including dimensions for the robot and lengths for cables and ropes.

4. Product Overview

4.1 Key Features

• Multi-Surface Cleaning: Operates on glass, tiles, smooth walls, and tables.
• High Suction Power: Up to 5000Pa adsorption capacity for secure attachment.
• Intelligent Navigation: Built-in AI technology detects window frames and obstacles, calculating optimal cleaning paths.
• Mimics Manual Wiping: Two cleaning suction cups rotate 360° to thoroughly clean surfaces.
• Safety Features: Embedded UPS for power loss protection and anti-fall control algorithm.
• Remote and App Control: Convenient control options for operation.

Image: This graphic highlights the robot's strong 5000Pa suction, capable of withstanding vertical gravity up to 5.0kg, and demonstrates its versatility across windows, tiles, and mirrors.

Image: The robot's cleaning mechanism is depicted, showing its two wheels rotating 360 degrees to simulate manual wiping for thorough cleaning.

4.2 Applicable Scenarios

The FONOBO Smart Window Cleaner Robot is suitable for various smooth surfaces:

• Bathroom Glass
• Seamless Tile Walls
• Framed Glass
• Wood/Tile Vertical Surfaces
• Mirrors
• Tables and Floors

Image: This diagram showcases the robot's versatility, indicating its applicability to bathroom glass, seamless tile walls, framed glass, wood/tile vertical surfaces, and bathroom mirrors.

5. Setup

1. Charge the Robot: Before first use, ensure the robot's internal battery is fully charged. This battery acts as a backup in case of power interruption.
2. Attach Cleaning Pads: Securely attach two clean microfiber cleaning pads to the bottom cleaning rings of the robot. Ensure they are properly aligned.
3. Apply Cleaning Solution: Lightly spray a small amount of glass cleaning solution onto the cleaning pads. Avoid oversaturating.
4. Connect Safety Rope: Attach one end of the 5-meter safety rope to the robot and the other end to a sturdy, fixed object indoors (e.g., a heavy furniture leg, a window frame anchor).
5. Connect Power: Plug the power adapter into the robot and then into a wall outlet. Ensure the connection is secure.
6. Place on Surface: Hold the robot firmly and place it onto the desired cleaning surface. Press the power button on the robot or the remote control. The robot will adhere to the surface using its suction.

6. Operation

6.1 Starting the Cleaning Cycle

• Once the robot is securely attached to the surface and powered on, press the 'Start' button on the robot or the remote control.
• The robot will automatically detect the window edges and begin its cleaning path.

6.2 Cleaning Modes

The robot offers 3 automatic operation modes for cleaning the entire window. These modes optimize the cleaning path for maximum efficiency.

6.3 Using the Remote Control

The remote control allows you to manually direct the robot or select cleaning modes. Refer to the remote control diagram in the included manual for specific button functions.

6.4 Ending Operation

• The robot will typically return to its starting position or stop once the cleaning cycle is complete.
• To manually stop the robot, press the 'Stop' button on the remote control or the robot itself.
• Carefully remove the robot from the surface by holding it firmly and pressing the release button (if applicable) or gently pulling it away once suction is disengaged.

Image: The FONOBO Smart Window Cleaner Robot is shown actively cleaning a large glass surface, demonstrating its autonomous operation within a home environment.

7. Maintenance

7.1 Cleaning Pads

• After each use, remove the cleaning pads from the robot.
• Wash the microfiber pads by hand or machine with mild detergent. Do not use bleach or fabric softener.
• Allow pads to air dry completely before reuse or storage.

7.2 Robot Body

• Wipe the exterior of the robot with a soft, damp cloth.
• Do not immerse the robot in water or spray cleaning solutions directly onto it.
• Ensure the suction ports are clear of debris.

7.3 Storage

• Store the robot and its accessories in a cool, dry place, away from direct sunlight and extreme temperatures.
• Ensure the robot is clean and dry before storing.

8. Troubleshooting

• Robot not adhering/losing suction:
  • Ensure the power cord is securely connected and the robot is receiving continuous power.
  • Check if cleaning pads are too wet; excessive moisture can reduce suction.
  • Verify the cleaning surface is smooth and free of significant cracks or holes.
  • Clean the suction ports if they appear blocked.
• Robot not moving or cleaning effectively:
  • Ensure cleaning pads are clean and properly attached.
  • Check for any obstructions on the cleaning surface.
  • Restart the robot and select a different cleaning mode.
• Remote control not responding:
  • Replace the batteries in the remote control.
  • Ensure there are no obstructions between the remote and the robot.

9. Specifications

10. Warranty and Support

FONOBO is committed to customer satisfaction. If you encounter any issues or have questions regarding your Smart Window Cleaner Robot, please contact our support team. You can reach us via Amazon email or through our official website. Our support team is available 24 hours to assist you.