1. Introduction
Thank you for purchasing the Xtreme Bluetooth Wireless Headphones. These headphones are designed to provide a comfortable and immersive audio experience, allowing you to stream audio wirelessly from Bluetooth-compatible devices up to 33 feet away. They feature built-in audio controls, a microphone for hands-free calls, and support for both auxiliary cable and Micro-SD card playback. Please read this manual carefully to ensure proper use and maintenance of your headphones.
2. Safety Information
To ensure safe operation and prevent damage, please observe the following precautions:
- Do not expose the headphones to extreme temperatures, direct sunlight, or high humidity.
- Avoid dropping or subjecting the headphones to strong impacts.
- Do not disassemble or attempt to repair the headphones yourself. This will void the warranty.
- Keep the headphones away from water and other liquids. They are not water resistant.
- Clean the headphones with a soft, dry cloth only. Do not use abrasive cleaners.
- Listen at moderate volume levels to prevent hearing damage. Prolonged exposure to loud sounds can cause permanent hearing loss.
- Keep out of reach of children.
3. Package Contents
Please check that all items are present in your package:
- Xtreme Bluetooth Wireless Headphones
- Micro-USB Charging Cable
- 3.5mm Auxiliary Audio Cable
4. Product Overview
Familiarize yourself with the components and controls of your Xtreme Bluetooth Wireless Headphones.
Image 1: Xtreme Bluetooth Wireless Headphones folded for compact storage.
Image 2: Side view of the headphones, highlighting the Micro-USB charging port and 3.5mm auxiliary input.
Image 3: Close-up of the headphone controls, including power, volume, and playback buttons.
The headphones feature an over-ear design with soft ear cushions for comfort. The headband is adjustable, and the earcups can be folded for easy portability. On one earcup, you will find the control buttons, a Micro-USB charging port, a 3.5mm auxiliary input, and a Micro-SD/TF card slot.
5. Setup
5.1 Charging the Headphones
Before first use, fully charge your headphones.
- Connect the small end of the included Micro-USB charging cable to the Micro-USB port on the headphones.
- Connect the larger end of the charging cable to a USB port on a computer or a USB wall adapter (not included).
- The LED indicator light will illuminate to show charging status.
- Charging typically takes approximately 2 hours. The LED indicator will change or turn off once charging is complete.
5.2 Powering On/Off
- To Power On: Press and hold the Power button until the LED indicator lights up and you hear an audible prompt.
- To Power Off: Press and hold the Power button until the LED indicator turns off and you hear an audible prompt.
5.3 Bluetooth Pairing
To connect your headphones wirelessly to a device:
- Ensure the headphones are fully charged and powered off.
- Press and hold the Power button for approximately 5-7 seconds until the LED indicator flashes blue and red alternately, indicating pairing mode.
- On your Bluetooth-enabled device (e.g., smartphone, tablet, computer), go to the Bluetooth settings and ensure Bluetooth is enabled.
- Search for available devices. The headphones should appear as "Xtreme Headphones" or a similar name.
- Select the headphones from the list to initiate pairing.
- Once successfully paired, the LED indicator on the headphones will flash blue slowly, and you will hear a confirmation tone.
- The headphones will automatically attempt to reconnect to the last paired device when powered on.
6. Operating Instructions
6.1 Basic Controls
The headphones feature multiple built-in controls for convenient operation:
- Power Button: Press and hold to power on/off. Short press to play/pause music or answer/end calls.
- Volume Up (+): Short press to increase volume. Long press for next track.
- Volume Down (-): Short press to decrease volume. Long press for previous track.
- Mode Button (M): Press to switch between Bluetooth, FM Radio (if available), and Micro-SD card modes.
- Microphone: For hands-free calls when connected via Bluetooth.
6.2 Auxiliary Mode
Use the 3.5mm auxiliary cable for a wired connection to audio sources without Bluetooth capability or when the headphone battery is depleted.
- Connect one end of the 3.5mm auxiliary cable to the 3.5mm audio input port on the headphones.
- Connect the other end of the cable to the audio output jack of your device (e.g., phone, computer, gaming console).
- The headphones will automatically switch to auxiliary mode. Note that controls on the headphones may be limited in this mode, and audio will be controlled by the connected device.
6.3 Micro-SD Card Playback
The headphones support playback of audio files directly from a Micro-SD (TF) card.
- Insert a Micro-SD card (with audio files) into the TF card slot on the headphones.
- If the headphones are in another mode, press the Mode (M) button to switch to Micro-SD card playback mode.
- Playback will begin automatically. Use the Play/Pause, Volume Up (+), and Volume Down (-) buttons to control playback.
7. Maintenance
7.1 Cleaning and Care
- Wipe the headphones with a soft, dry, lint-free cloth.
- Do not use liquid cleaners, sprays, or harsh chemicals.
- Avoid getting moisture into any openings.
- The ear cushions can be gently wiped with a damp cloth and mild soap solution, then dried thoroughly.
7.2 Storage
When not in use, store the headphones in a cool, dry place, away from direct sunlight and extreme temperatures. The foldable design allows for compact storage.
8. Troubleshooting
If you encounter issues with your headphones, refer to the following table for common problems and solutions.
| Problem | Solution |
|---|---|
| Headphones will not power on. | Ensure the headphones are fully charged. Connect to a power source using the Micro-USB cable. |
| Cannot pair with a Bluetooth device. | Ensure headphones are in pairing mode (flashing blue/red). Make sure Bluetooth is enabled on your device and it is within 33 feet. Forget previous pairings on your device and try again. |
| No sound or low volume. | Check volume levels on both the headphones and the connected device. Ensure the headphones are properly paired or the auxiliary cable is fully inserted. |
| Sound is distorted or cuts out. | Move closer to the Bluetooth device to reduce interference. Ensure there are no obstacles between the headphones and the device. Check for other strong wireless signals nearby. |
| Micro-SD card not playing. | Ensure the Micro-SD card is inserted correctly and contains compatible audio files. Press the Mode button to switch to Micro-SD mode. |
9. Specifications
Technical details for the Xtreme Bluetooth Wireless Headphones Model XBH9-1023-BLK:
| Feature | Detail |
|---|---|
| Model Name | XBH9-1023-BLK |
| Brand | XTREME DIGITAL LIFESTYLE ACCESSORIES |
| Connectivity Technology | Wireless (Bluetooth), Wired (3.5mm Auxiliary) |
| Wireless Communication | Bluetooth |
| Bluetooth Range | Up to 33 feet (10 meters) |
| Headphones Jack | 3.5 mm Jack |
| Charging Time | Approximately 2 Hours |
| Frequency Range | 20 Hz - 20,000 Hz |
| Earpiece Shape | Over Ear |
| Form Factor | Over Ear |
| Special Feature | Foldable Design, Micro-SD Card Slot |
| Control Type | Media Control Buttons |
| Water Resistance Level | Not Water Resistant |
| Material | Plastic, Fabric, Silicone |
| Color | Black |
| UPC | 805106228484 |
10. Warranty and Support
10.1 Warranty Information
For information regarding the warranty period and terms for your Xtreme Bluetooth Wireless Headphones, please refer to the warranty card included with your purchase or contact the retailer where the product was purchased. Keep your proof of purchase for warranty claims.
10.2 Customer Support
If you require further assistance or have questions not covered in this manual, please contact the manufacturer or your retailer's customer support department. Contact details can typically be found on the product packaging or the brand's official website.
