Velivi KMHJ408-VELIVI

Velivi 179-Bottle Wine Cooler Refrigerator

Model: KMHJ408-VELIVI

User Instruction Manual

Introduction

Thank you for choosing the Velivi 179-Bottle Wine Cooler Refrigerator. This manual provides important information regarding the installation, operation, maintenance, and troubleshooting of your appliance. Please read it thoroughly before use and keep it for future reference.

Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons.

  • Ensure the appliance is properly grounded.
  • Do not operate if the power cord is damaged.
  • Keep ventilation openings clear of obstruction.
  • Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
  • Unplug the appliance before cleaning or performing maintenance.

Setup and Installation

Unpacking

Carefully remove all packaging materials. Inspect the appliance for any damage. If damage is found, contact your retailer immediately. Remove any protective films from surfaces.

Placement

This wine cooler is designed for freestanding installation. Ensure adequate space around the unit for proper ventilation. Avoid placing the unit in direct sunlight or near heat sources. The dimensions of the unit are approximately 27.2 inches (D) x 23.5 inches (W) x 62.9 inches (H).

Diagram showing the dimensions of the Velivi wine cooler: 27.2 inches deep, 23.5 inches wide, and 62.9 inches high.

Image: Product dimensions for installation planning.

The unit can also be integrated as a built-in appliance, requiring specific cabinet dimensions for proper fit and ventilation. Refer to the diagram below for visual guidance on freestanding versus built-in placement.

Comparison image showing the Velivi wine cooler in a freestanding setup on the left and a built-in setup on the right, integrated into kitchen cabinetry.

Image: Freestanding and built-in installation options.

Initial Power-Up

After placing the unit, allow it to stand upright for at least 24 hours before plugging it into a power outlet. This allows the compressor oils to settle, preventing potential damage. The unit requires a standard North American 2-pin (Type A) 115-volt electrical outlet.

Door Handle and Shelves Installation

The door handle and wooden shelves may require minimal assembly. Securely attach the door handle using the provided hardware. Insert the wooden shelves into their designated slots. The shelves are designed to be moveable for flexible storage configurations.

Close-up view of the Velivi wine cooler's interior, showing bottles resting on wooden shelves. Arrows indicate the shelves are moveable.

Image: Moveable wooden shelves for flexible bottle storage.

Operating Instructions

Control Panel Overview

The wine cooler features an inductive touch control panel with a real-time LED display for easy temperature management and settings adjustment.

Close-up of the Velivi wine cooler's touch control panel with LED display, showing icons for light control, Celsius/Fahrenheit, temperature setting, temperature up, temperature down, and power switch.

Image: Inductive touch control panel with LED display.

Functions

  • Power Switch: Press to turn the unit on or off.
  • Temperature Up/Down: Use these buttons to adjust the desired temperature. The temperature range is 41°F to 65°F (5°C to 18°C).
  • Celsius/Fahrenheit Degree: Toggle between Celsius and Fahrenheit temperature display.
  • Light Control: Activates or deactivates the internal blue LED lighting. This light is designed to protect wine tannins from UV exposure.
  • Temperature Setting: Confirms the selected temperature.

Loading Wine Bottles

The wine cooler has a large capacity, accommodating up to 179 standard-sized wine bottles. Arrange bottles on the wooden shelves, ensuring proper air circulation. The shelves can be adjusted to fit various bottle sizes.

Interior view of the Velivi wine cooler showing multiple rows of wine bottles on sliding wooden shelves.

Image: Wine bottles stored on sliding rail shelves.

Door Features

The wine cooler features a double reinforced tempered glass door, providing UV protection and thermal insulation to maintain optimal wine storage conditions. The door is also clearly visible, allowing you to view your collection without opening the unit.

Diagram illustrating the features of the wine cooler's door: automatic defrost, clear visibility, UV protection, thermal insulation, and tempered glass.

Image: Features of the tempered glass door.

Door Lock

The unit is equipped with a safety lock to secure your wine collection. Use the provided key to lock and unlock the door.

Maintenance and Care

Cleaning the Interior

Before cleaning, unplug the appliance. Clean the interior surfaces and shelves with a mild detergent and warm water. Wipe dry with a soft cloth. Do not use abrasive cleaners or solvents.

Cleaning the Exterior

Clean the exterior surfaces with a soft cloth and a mild, non-abrasive cleaner. For stainless steel surfaces, use a stainless steel cleaner. Ensure the door seal is clean and free of debris to maintain an airtight seal and energy efficiency.

Defrosting

The wine cooler features an automatic defrost system (Hot Gas Defrost), which minimizes the need for manual defrosting. If ice buildup occurs, unplug the unit and allow it to defrost naturally, then wipe away any excess water.

Power Saving Tips

  • Avoid opening the door frequently.
  • Ensure the door seal is intact and clean.
  • Do not overload the unit, as this can restrict airflow.
  • Keep the unit away from direct heat sources.

Troubleshooting Guide

Before contacting customer support, please refer to the following common issues and solutions:

ProblemPossible CauseSolution
Unit does not operateNo power supply; Power switch off; Circuit breaker tripped.Check power connection; Turn on power switch; Reset circuit breaker.
Unit is not coolingTemperature setting too high; Door not closed properly; Obstruction of air vents; Excessive door openings.Adjust temperature; Ensure door is sealed; Clear vents; Reduce door openings.
Excessive noiseUnit not level; Objects vibrating against the unit; Fan obstruction.Adjust leveling feet; Ensure clearance; Check for fan obstruction. The unit operates below 40dB, similar to a quiet library environment.
Water on floorDrainage tube blocked; High humidity.Clear drainage tube; This is normal in high humidity, wipe up water.

The unit is designed for ultra-silent operation, typically below 40dB. If you experience unusual or loud noises, refer to the table above or contact support.

Infographic showing noise levels: Night Bedroom (30dB), Fridge Running (less than 40dB), Normal Talking (50dB), Music (70dB). The Velivi wine cooler is depicted with a less than 40dB rating.

Image: Noise level comparison, highlighting the quiet operation of the wine cooler.

Product Specifications

BrandVelivi
Model NameKMHJ408-VELIVI
Product Dimensions (D x W x H)27.2" x 23.5" x 62.9"
Capacity179 Bottles (14.5 cubic feet)
Temperature Range41°F - 65°F (5°C - 18°C)
Installation TypeFreestanding
Cooling MethodCompressor
Defrost SystemAutomatic (Hot Gas Defrost)
Number of Shelves14 (Wood)
Door Material TypeStainless Steel with Tempered Glass
Special FeaturesAdjustable Shelves, Digital Temperature Control, Door Lock, Touch Control, Blue Protective Light
Voltage115 volts
Item Weight150 pounds
CertificationCE

Warranty Information

This Velivi wine cooler refrigerator comes with a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty card included with your product or contact customer support.

Customer Support

If you have any questions, require assistance, or encounter issues not covered in this manual, please contact Velivi customer support:

Our professional and friendly after-sale service group is available to assist you.

© 2026 Velivi. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.