Introduction
This user manual provides comprehensive instructions for the Sena 10C EVO Bluetooth Camera and Communication System. The 10C EVO integrates Sena's leading Bluetooth communication platform with an advanced 4K camera, designed for seamless rider communication and high-quality video recording. Its compact and aerodynamic design is optimized for helmet integration, minimizing wind resistance and noise.
Please read this manual thoroughly before using your device to ensure proper operation and to maximize your experience.
Image: The Sena 10C EVO unit, featuring the main communication module, two helmet speakers, and two microphone options (boom and wired lavalier), all connected by wires. The main unit has a control dial and a camera lens.
Package Contents
Upon opening your Sena 10C EVO package, please verify that all components are present and in good condition. The standard package typically includes:
- Sena 10C EVO Main Unit
- Helmet Clamp Kit
- Glued Surface Mounting Adapter
- Helmet Speakers (Pair)
- Boom Microphone
- Wired Microphone
- USB Power & Data Cable
- Speaker Pads
- Hook and Loop Fasteners for Speakers
- Hook and Loop Fasteners for Boom Microphone
- Hook and Loop Fasteners for Wired Microphone
- Boom Microphone Holder
- Allen Wrench
- User Manual (this document)
Setup and Installation
Proper installation of the Sena 10C EVO is crucial for optimal performance and user comfort. Follow these steps carefully.
1. Mounting the Main Unit
The 10C EVO can be mounted to most helmets using either the clamp kit or the glued surface mounting adapter.
- Clamp Kit: Slide the clamp between the helmet shell and the inner padding. Ensure it is securely fastened.
- Glued Surface Mounting Adapter: Clean the desired mounting area on the helmet surface thoroughly. Peel off the adhesive backing and firmly press the adapter onto the helmet for at least 60 seconds. Allow 24 hours for the adhesive to fully cure before use.
Image: A detailed view of the Sena 10C EVO main unit, showing its compact form factor and how it integrates with a helmet mounting bracket.
2. Installing Speakers
Attach the speakers to the inside of your helmet using the provided hook and loop fasteners. Position them directly over your ears for optimal audio clarity.
Image: A close-up of the two flat, circular helmet speakers, designed to fit inside a helmet, with their connecting wires.
3. Installing Microphones
Choose between the boom microphone (for open-face or modular helmets) or the wired microphone (for full-face helmets).
- Boom Microphone: Attach the boom microphone to the inside of the helmet near your mouth using the boom microphone holder and hook and loop fasteners.
- Wired Microphone: Attach the wired microphone to the inside of the helmet near your mouth using hook and loop fasteners.
Image: A detailed view of the two microphone options: a flexible boom microphone with a foam cover and a smaller wired microphone, both designed for helmet integration.
4. Connecting Components
Connect the speaker and microphone cables to the corresponding ports on the main 10C EVO unit. Ensure all connections are secure.
Operating Instructions
Powering On/Off
- Power On: Press and hold the Center Button and the Phone Button for 1 second.
- Power Off: Press and hold the Center Button and the Phone Button for 5 seconds.
Bluetooth Pairing
To pair your 10C EVO with a Bluetooth-enabled device (e.g., smartphone, GPS):
- With the 10C EVO powered off, press and hold the Phone Button for 5 seconds until the LED flashes red and blue.
- On your smartphone, enable Bluetooth and search for devices.
- Select "Sena 10C EVO" from the list of detected devices.
- If prompted, enter PIN "0000".
Intercom Communication
The 10C EVO supports four-way Bluetooth intercom communication up to 1.6 km (1 mile) in open terrain.
- Starting Intercom: Tap the Center Button once to connect with the first paired intercom friend. Tap twice for the second, and three times for the third.
- Ending Intercom: Tap the Center Button once.
Camera Operation
The integrated camera captures video at 4K/30FPS.
- Start Recording: Press and hold the Camera Button for 1 second.
- Stop Recording: Press and hold the Camera Button for 1 second again.
- Video Tagging: The 10C EVO supports video tagging, allowing you to save specific moments from your ride. Refer to the Sena Utility App for detailed instructions on configuring and using this feature.
Music and Audio
- Play/Pause Music: Press and hold the Center Button for 1 second.
- Volume Up: Rotate the Jog Dial clockwise.
- Volume Down: Rotate the Jog Dial counter-clockwise.
- Next Track: Press the Jog Dial button forward.
- Previous Track: Press the Jog Dial button backward.
The Smart Audio Mix feature allows you to blend intercom audio with music or GPS directions.
Maintenance and Care
To ensure the longevity and optimal performance of your Sena 10C EVO, follow these maintenance guidelines:
- Cleaning: Wipe the main unit with a soft, damp cloth. Do not use harsh chemicals or solvents.
- Water Resistance: The 10C EVO is designed to be water-resistant, but it is not waterproof. Avoid submerging the device in water.
- Battery Care: The device uses a Lithium Polymer battery. For best battery life, avoid fully discharging the battery frequently. Charge the device regularly, especially if it will be stored for extended periods.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Firmware Updates: Regularly check for and install firmware updates using the Sena Device Manager software. Updates often include performance improvements and new features.
Troubleshooting
If you encounter issues with your Sena 10C EVO, refer to the following common troubleshooting steps:
Device Not Powering On
- Ensure the battery is charged. Connect the device to a power source using the USB cable.
- Perform a factory reset (refer to the full Sena manual or Sena website for specific instructions, as this often involves a combination of button presses).
No Audio from Speakers
- Check that the speakers are securely connected to the main unit.
- Verify that the volume is not set to minimum.
- Ensure the speakers are correctly positioned over your ears inside the helmet.
Intercom Connection Issues
- Ensure both devices are within the maximum intercom range (1.6 km).
- Re-pair the intercom devices.
- Check for any physical obstructions or strong electromagnetic interference.
Camera Recording Problems
- Ensure a compatible microSD card is inserted and has sufficient free space.
- Check the battery level, as low battery can prevent recording.
- Format the microSD card if issues persist (this will erase all data on the card).
Specifications
| Feature | Detail |
|---|---|
| Model Name | Sena 10C EVO |
| Model Number | 10C-EVO-02 |
| Dimensions (Main Unit) | 2.78 x 1.44 x 0.54 inches |
| Weight (Main Unit) | 2.12 ounces |
| Bluetooth | Bluetooth 4.1 |
| Intercom Range | Up to 1.6 km (1 mile) in open terrain |
| Intercom Support | 4-way intercom |
| Video Recording Quality | 4K @ 30FPS |
| Talk Time | Up to 20 hours |
| Video Recording Time | Up to 1.5 hours |
| Battery Type | Lithium Polymer (included) |
| Special Features | Lightweight, Smart Audio Mix, Video Tagging, Advanced Noise Control, HD Voice, Voice Prompts, Remote Control Compatible |
Warranty Information
Sena products are covered by a limited warranty from the date of purchase. The specific terms and duration of the warranty may vary by region and product. Please retain your proof of purchase for warranty claims.
For detailed warranty information, including coverage, exclusions, and how to make a claim, please visit the official Sena website or contact Sena customer support.
Customer Support
For further assistance, technical support, or to download the latest firmware and user guides, please visit the official Sena website:
You can also find FAQs and community forums on the Sena support portal.
