1. Introduction
The Meliconi AC 200 is a universal remote control designed for domestic air conditioners, offering broad compatibility with most brands. It provides control over essential functions and features a large, backlit screen for ease of use in various lighting conditions, including darkness. This manual will guide you through the proper setup, operation, and maintenance of your AC 200 remote control to ensure optimal performance.
Key features include a permanent memory that retains code settings, a built-in LED torch, and quick settings for both cooling and heating modes.
2. Setup
2.1. Battery Installation
The Meliconi AC 200 requires two 1.5V AAA/LR03 alkaline batteries (not included). To install the batteries:
- Open the battery compartment cover located on the back of the remote control.
- Insert two AAA batteries, ensuring correct polarity (+ and - terminals match the indicators inside the compartment).
- Close the battery compartment cover securely.
2.2. Programming the Remote Control
The AC 200 can be programmed to control your air conditioner using either an automatic search function or by manually entering a code. The remote control features permanent memory, so the code will not be lost when batteries are removed or replaced.
Automatic Search Function:
- Ensure your air conditioner is powered on.
- Point the AC 200 remote control towards the air conditioner.
- Press and hold the SET button until the code search indicator appears on the remote's display. The remote will begin transmitting codes.
- When your air conditioner responds (e.g., turns off, changes mode), immediately release the SET button. The code is now stored.
- Test all primary functions to ensure correct operation. If not all functions work, repeat the process to find an alternative code.
Manual Code Entry:
- Identify your air conditioner brand from the compatibility list provided in the manual or on the Meliconi website.
- Locate the corresponding code(s) for your brand.
- Press and hold the SET button until the code entry mode is activated on the display.
- Use the temperature up/down buttons to enter the 3-digit code.
- Press the OK or SET button to confirm the code.
- Test all primary functions. If not all functions work, try the next code listed for your brand.
For a complete and updated list of compatible brands and codes, please visit the official Meliconi website: www.meliconi.com/ac200.
3. Operation
3.1. Button Functions
The Meliconi AC 200 remote control features clearly labeled buttons for intuitive operation:
- Power Button (Green): Turns the air conditioner On or Off.
- MODE Button: Cycles through operating modes (e.g., Cool, Heat, Fan, Dry, Auto).
- TEMP Buttons (Orange Up/Down Arrows): Adjusts the desired temperature.
- Fan Speed Button: Adjusts the fan speed (e.g., Low, Medium, High, Auto).
- Swing Button: Controls the air deflector movement.
- TIME ON / TIME OFF Buttons: Sets the timer for automatic power-on or power-off.
- FAST COOL / FAST HEAT Buttons: Activates quick cooling or heating modes.
- LED Torch Button (Light Bulb Icon): Activates the built-in LED torch.
- C/F Button: Toggles between Celsius and Fahrenheit temperature display.
- SET Button: Used for programming the remote control.
3.2. Screen Display
The large, backlit LCD screen displays current settings and status indicators:
- Temperature Display: Shows the set temperature in Celsius or Fahrenheit.
- Mode Icons: Indicates the current operating mode (e.g., snowflake for cool, sun for heat, fan icon for fan mode).
- Fan Speed Indicator: Displays the selected fan speed.
- Timer ON/OFF: Shows active timer settings.
- Battery Indicator: Alerts when batteries are low.
4. Maintenance
4.1. Battery Replacement
When the battery indicator appears on the display or the remote's performance diminishes, replace the batteries. Follow the battery installation steps in Section 2.1. The permanent memory feature ensures that your programmed code will not be lost during battery replacement.
4.2. Cleaning
To clean the remote control:
- Wipe the surface with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or chemical agents, as these can damage the remote's finish or internal components.
- Avoid exposing the remote to excessive moisture.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control does not respond. | Low or dead batteries; incorrect battery installation. | Replace batteries with new AAA alkaline batteries, ensuring correct polarity. |
| Air conditioner does not respond to commands. | Incorrect code programmed; remote not pointed at AC unit. | Ensure the remote is pointed directly at the air conditioner's receiver. Re-program the remote using the automatic search or manual code entry (Section 2.2). Try alternative codes for your brand. |
| Some functions do not work. | Code partially compatible; specific function not supported by AC model. | Try another code for your air conditioner brand. Some advanced functions may not be universally supported by all AC models. |
| Display is dim or flickering. | Low batteries. | Replace batteries. |
6. Specifications
- Brand: Meliconi
- Model Name: AC 200
- Model Number: 802102
- Dimensions: 11 x 18.5 x 3 cm
- Weight: 120 grams
- Batteries: 2 x AAA/LR03 (not included)
- Compatible Peripherals: Air Conditioner
- Special Features: Universal compatibility, Backlit screen, LED torch, Permanent memory
- Maximum Range: 10 meters
- Color: White
7. Warranty and Support
The Meliconi AC 200 Universal Air Conditioner Remote Control typically comes with a 2-year warranty from the date of purchase. For detailed warranty terms, conditions, and to register your product, please refer to the documentation included in the product packaging or visit the official Meliconi website.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Meliconi customer service through their official website or the contact information provided in your product's packaging.
