Rae Dunn 192598558664

Rae Dunn Salt and Pepper Grinder Set Instruction Manual

Model: 192598558664

Product Overview

This Rae Dunn Salt and Pepper Grinder Set provides a manual method for grinding salt, pepper, and other spices. The set features a high-quality bamboo construction with a stainless steel grinding mechanism, designed for durability and consistent performance. Each grinder measures approximately 2.2 inches in width and 6 inches in height.

  • Material: Bamboo body with stainless steel grinding mechanism.
  • Adjustable Coarseness: The grinding mechanism allows for adjustment from fine to coarse grinds.
  • Easy Refill: Designed for straightforward refilling of spices.
  • Dimensions: Approximately 2.2" W x 6" H.

Setup and Filling

Before first use, or when refilling, follow these steps to prepare your grinder:

  1. Unscrew the Top Nut: Locate the stainless steel nut at the very top of the grinder. Turn this nut counter-clockwise to loosen and remove it.
  2. Remove the Top Cap: Once the nut is removed, carefully lift off the top cap of the grinder.
  3. Fill with Spices: Pour your desired whole spices, such as peppercorns or coarse salt, into the main chamber of the grinder. Ensure not to overfill.
  4. Replace the Top Cap and Nut: Place the top cap back onto the grinder, aligning it with the central rod. Then, screw the stainless steel nut back onto the rod, turning clockwise until it is finger-tight.
Diagram showing three steps to refill the grinder: unscrewing the top nut, removing the top cap, and pouring spices into the chamber.

Image: Step-by-step guide for refilling the grinder.

Disassembled salt grinder showing the top cap, central rod, and main bamboo body.

Image: Components of the grinder during refilling.

A spoon pouring coarse salt into the open top of a Rae Dunn salt grinder.

Image: Filling the grinder with spices.

Video: Demonstrates the process of refilling the grinder and adjusting the grind coarseness.

Operation

To use the grinder and adjust the coarseness of your grind:

  1. Adjust Coarseness: The stainless steel nut on top of the grinder controls the grind size. Turn the nut clockwise for a finer grind and counter-clockwise for a coarser grind. Experiment to find your preferred setting.
  2. Grind Spices: Hold the body of the grinder firmly and twist the top cap. The grinding mechanism at the bottom will process the spices, dispensing them from the base.
A Rae Dunn pepper grinder showing its dimensions and an arrow indicating how to adjust the top nut for finer or coarser grind.

Image: Illustration of how to adjust the grind coarseness.

Close-up view of the premium grinding mechanism at the base of a Rae Dunn salt grinder, with ground pink Himalayan salt visible.

Image: Detail of the grinding mechanism.

Video: Demonstrates the process of refilling the grinder and adjusting the grind coarseness.

Maintenance

Proper care ensures the longevity and performance of your grinders:

  • Cleaning: The grinders are dishwasher safe. For best results, disassemble the grinder before washing.
  • Drying: Ensure all parts are completely dry before reassembling and refilling with spices to prevent clumping or damage to the mechanism.
  • Storage: Store in a dry place away from direct sunlight and excessive humidity to preserve the bamboo and spice quality.

Troubleshooting

If you encounter issues with your grinder, consider the following:

  • Difficulty Grinding: Check if the top nut is too tight, which can prevent grinding. Loosen it slightly. Also, ensure the spice chamber is not overfilled, which can jam the mechanism.
  • Inconsistent Grind: Adjust the top nut to your desired coarseness. If the issue persists, check for any foreign objects or blockages in the grinding mechanism.
  • No Spice Dispensed: Verify that the grinder is filled with spices. If it is, check for blockages in the grinding mechanism or ensure the top nut is not excessively loose, which might prevent proper engagement.

Specifications

FeatureDetail
BrandRae Dunn
Model Number192598558664
MaterialBamboo
ColorCream
Product Dimensions2.2"W x 6"H
Item Weight6.8 ounces
Operation ModeManual
Recommended UsesKitchen
Dishwasher SafeYes
ManufacturerEnchante Direct

Warranty and Support

For warranty information or product support, please refer to the documentation included with your purchase or contact Rae Dunn customer service directly. Details can often be found on the manufacturer's official website or through your retailer.

Related Documents - 192598558664

PreviewDanfoss RAE Fühlerelemente mit Schnappbefestigung - Datenblatt
Technisches Datenblatt für Danfoss RAE Fühlerelemente (RAE 5054, RAE 5056, RAE 5154) mit Schnappbefestigung. Informationen zu Anwendung, Konstruktion, Montage, Abmessungen und Zubehör.
PreviewDanfoss RAE Sensors Technical Data Sheet - Snap-on Fitting
Detailed technical specifications for Danfoss RAE series thermostatic radiator sensors, featuring easy snap-on installation, frost protection, and adjustable temperature control. Includes model numbers and compatibility information.
PreviewDanfoss RAE Thermostatic Radiator Valve Heads with Snap-On Connection - Technical Data
Technical specifications and installation guide for Danfoss RAE series thermostatic radiator valve heads, including models RAE 5054, RAE 5056, and RAE 5154. Features include frost protection, range limitation, and snap-on mounting.
PreviewDanfoss RAE típusú termosztatikus érzékelők KLAPP csatlakozóval - Adatlap
Részletes adatlap a Danfoss RAE sorozatú termosztatikus radiátorérzékelőkhöz (RAE 5054, RAE 5056) KLAPP csatlakozással. Tartalmazza az alkalmazási területeket, a működési elvet, a telepítési útmutatót, a műszaki specifikációkat és a méreteket. Az érzékelők megfelelnek az EN 215 szabványnak.
PreviewTermostate RAE Danfoss: Fișă Tehnică și Specificații
Fișă tehnică detaliată pentru termostatele Danfoss RAE (RAE 5054, RAE 5056, RAE 5154) cu fixare prin presare. Include aplicații, specificații tehnice, instrucțiuni de montaj și reglare.
PreviewEspecificación Técnica: Sensor Termostático Danfoss RAE con Sistema SNAP
Especificaciones técnicas detalladas para la serie de sensores termostáticos Danfoss RAE, incluyendo los modelos RAE 5054 y RAE 5056, con sistema SNAP, aplicación, construcción y dimensiones.