Introduction
Thank you for choosing the Feit Electric Smart Rotating Light Bulb with Wireless Camera. This innovative device combines the functionality of a powerful LED light bulb with advanced security features, including a 1080p HD camera, motion detection, two-way audio, and night vision. Designed for easy installation into standard E26 sockets, it provides comprehensive home monitoring and illumination without the need for complex wiring or additional bulky equipment. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and security.
Important Safety Information
Please read and understand all safety instructions before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Ensure power is turned off at the circuit breaker before installation.
- Do not use with dimmers. This product is not designed for use with dimmable circuits.
- Install in a dry location. This product is for indoor use only and not suitable for wet or damp environments.
- Do not disassemble or modify the device. Refer all servicing to qualified personnel.
- Keep out of reach of children.
- Operate within the specified voltage range (120V AC).
Package Contents
Verify that all items listed below are included in your package:
- Feit Electric Smart Rotating Light Bulb with Wireless Camera
- Quick Start Guide
Image: The product packaging, highlighting key features such as 40W LED replacement, WiFi connectivity, 450 lumens, and an estimated energy cost of $1.20 per year. It also shows compatibility with Alexa and Google Home.
Product Overview
Familiarize yourself with the components of your Smart Rotating Light Bulb Camera:
Image: A detailed diagram illustrating the various parts of the smart camera bulb, including the camera lens, microphone, status light, speaker, microSD card slot, and reset button. It also highlights the 330-degree adjustable head rotation.
- Camera Lens: Captures 1080p HD video.
- Microphone: For two-way audio communication.
- Status Light: Indicates device status (e.g., pairing mode, connected).
- Speaker: For two-way audio communication.
- MicroSD Card Slot: For local video storage (card sold separately).
- Reset Button: Used to reset the device to factory settings.
- E26 Base: Standard screw-in base for light fixtures.
- Adjustable Head: Allows for 330° horizontal rotation of the camera.
Image: A side view of the smart camera bulb with its dimensions (Height 5.2 in., Width 3.2 in.) and a list of key features: Motion Detection, Two-Way Audio, 1080p HD video, ability to record video with a MicroSD Card (sold separately), taking pictures directly from the app, and a 120° Field of Vision.
Setup
1. Download the Feit Electric App
Search for "Feit Electric" in the Apple App Store or Google Play Store and download the app. Create an account or log in if you already have one.
2. Install the Smart Bulb Camera
- Ensure the power to the light fixture is OFF at the switch and circuit breaker.
- Screw the Feit Electric Smart Rotating Light Bulb into a standard E26 light socket.
- Turn the power ON at the switch and circuit breaker. The bulb will begin to flash, indicating it is in pairing mode.
Image: The Feit Electric Smart Camera Bulb installed in a ceiling light fixture within a garage setting, demonstrating a typical installation environment.
3. Pair with the Feit Electric App
- Open the Feit Electric app.
- Tap the "+" icon in the top right corner to add a device.
- Select "Camera" or "Smart Camera Bulb" from the device list.
- Follow the on-screen instructions to connect the bulb to your 2.4GHz Wi-Fi network. (Note: This device only supports 2.4GHz Wi-Fi networks).
- Once connected, the status light on the bulb will turn solid, and you will see the device added in your app.
Image: A screen detailing the smart camera features, including 1080p HD Video, MicroSD Storage, Night Vision, Motion and Sound Detection, and the ease of installation ("Installs like a Regular Bulb"). An accompanying smartphone screenshot shows the live view and control options within the Feit Electric app.
Operating Instructions
Live View and Recording
- Open the Feit Electric app and select your Smart Camera Bulb.
- You will see a live feed from the camera.
- Tap the "Record" button to manually record video or "Screenshot" to capture an image.
- Insert a microSD card (sold separately) into the designated slot for continuous recording or event-triggered recording.
Two-Way Audio
- While in live view, tap the "Talk" button (microphone icon) to speak through the bulb's speaker.
- Tap again to end speaking. You can hear audio from the bulb's microphone at all times.
Motion Detection and Alerts
- Navigate to the device settings in the app.
- Enable "Motion Detection" and adjust sensitivity levels as needed.
- Configure "Notification Settings" to receive instant alerts on your smartphone when motion is detected.
Image: A visual representation of the smart camera bulb's security capabilities, emphasizing its role in protecting homes from intruders through features such as Motion Detection, Two-Way Audio, video recording with a MicroSD card, and the ability to take pictures directly from the app. An inset shows a live view from the camera.
Night Vision
- The camera automatically switches to infrared night vision in low-light conditions, providing clear black-and-white video.
- No manual adjustment is typically required for night vision.
Camera Rotation (Pan Control)
- In the live view screen of the app, use the directional controls to pan the camera horizontally up to 330 degrees.
- This allows you to adjust the viewing angle remotely.
Smart Home Integration
- The Feit Electric Smart Camera Bulb is compatible with Amazon Alexa and Google Assistant.
- Follow the instructions in your Alexa or Google Home app to link your Feit Electric account and enable voice control for viewing the camera feed on compatible smart displays.
Image: A smart display device showing a live video feed from the Feit Electric Smart Camera Bulb, demonstrating its compatibility with voice assistants like Amazon Alexa. The image includes a speech bubble with the command "Alexa, show me the living room."
Image: A woman relaxing on a beach while using her smartphone to manage the Feit Electric Smart Camera Bulb, illustrating remote access capabilities. Icons represent various app features: Remote Access, Voice Control, Scheduling, On/Off, Device Sharing, Grouping, and Motion Detection.
Maintenance
Cleaning
- Ensure the power is OFF before cleaning.
- Wipe the bulb and camera lens with a soft, dry, lint-free cloth.
- Do not use liquid cleaners or aerosol sprays directly on the device.
Firmware Updates
- Periodically check the Feit Electric app for available firmware updates.
- Updates can improve performance, add new features, and enhance security.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb not flashing during setup. | Power is off; bulb not reset; incorrect socket. | Ensure power is on. Try turning the light switch off/on quickly 3 times to reset. Verify E26 socket. |
| Cannot connect to Wi-Fi. | Incorrect Wi-Fi password; 5GHz network; too far from router. | Double-check password. Ensure you are connecting to a 2.4GHz network. Move bulb closer to router. |
| No video feed. | Internet connection issue; bulb offline; app glitch. | Check internet connection. Verify bulb is online in the app. Restart the app or your phone. |
| Motion detection not working. | Feature disabled; sensitivity too low; poor lighting. | Enable motion detection in app settings. Increase sensitivity. Ensure adequate lighting or rely on night vision. |
Specifications
- Model: A450/850/CAMWIFI/LED
- Light Type: LED
- Wattage: 10 watts (40W Equivalent)
- Color Temperature: 5000K Daylight
- Brightness: 450 Lumens
- Base Type: E26 (Standard)
- Camera Resolution: 1080p HD
- Field of Vision: 120°
- Rotation: 330° Horizontal Pan
- Connectivity: 2.4GHz Wi-Fi only
- Special Features: Motion Sensor, Night Vision, 2-Way Audio, Adjustable Head
- Lifetime: 15,000-Hour
- Dimensions: Height 5.2 in., Width 3.2 in.
Warranty and Support
Warranty Information
This Feit Electric Smart Rotating Light Bulb with Wireless Camera comes with a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accident, unauthorized modification, or acts of nature. Please retain your proof of purchase for warranty claims.
Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact Feit Electric Customer Support:
- Website: www.feit.com
- Phone: Refer to the Feit Electric website for the most current contact numbers.
- Email: Refer to the Feit Electric website for support email addresses.
Please have your model number (A450/850/CAMWIFI/LED) and proof of purchase ready when contacting support.
Image: The Feit Electric Corporate Headquarters building, accompanied by icons and text highlighting the company's history ("Established in 1978"), reputation ("Trusted US-based brand"), and commitment to quality ("High Testing & Safety Standards").
