RYGHT TOOGO M R481313 Wireless Outdoor Speaker User Manual

Introduction

Thank you for purchasing the RYGHT TOOGO M R481313 Wireless Outdoor Speaker. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.

The TOOGO M is a portable wireless speaker designed for outdoor use, featuring RGB LED lighting and a long-lasting battery. It is built to withstand outdoor conditions with its IPX6 water resistance rating.

Product Overview

The RYGHT TOOGO M R481313 is a compact and robust wireless speaker. It features two main speaker grilles with integrated RGB LEDs, a control panel on the top, and a durable carrying strap. The speaker is designed for portability and outdoor environments.

Key Features:

• Wireless Connectivity: Bluetooth for seamless audio streaming.
• RGB LED Lighting: 9 different light modes that synchronize with music.
• IPX6 Water Resistance: Protected against powerful water jets, suitable for outdoor and poolside use.
• Long Battery Life: Up to 7.5 hours of playback on a single charge.
• Integrated Microphone: For hands-free calls and voice assistant activation (Siri/Google Assist).
• TWS Function: Ability to pair two TOOGO M speakers for stereo sound.
• Micro SD Card Slot: For direct music playback.

Package Contents

Ensure all items are present in the package:

• RYGHT TOOGO M R481313 Wireless Outdoor Speaker
• USB-C Charging Cable
• User Manual (this document)

Setup

1. Charging the Speaker

Before first use, fully charge the speaker. Connect the supplied USB-C cable to the charging port on the speaker and the other end to a USB power adapter (not included) or a computer's USB port.

The charging indicator light will show the charging status. Once fully charged, the indicator will change or turn off.

2. Powering On/Off

To power on the speaker, press and hold the Power button (usually indicated by a circle with a vertical line) for a few seconds until you hear an audible prompt or see the LED lights activate.

To power off, press and hold the Power button again until the speaker powers down.

3. Bluetooth Pairing

When powered on for the first time, the speaker will automatically enter Bluetooth pairing mode. The LED indicator will flash, indicating it's ready to pair.

1. Enable Bluetooth on your smartphone, tablet, or other audio device.
2. Search for available Bluetooth devices.
3. Select "TOOGO M" from the list of devices.
4. Once paired, you will hear a confirmation sound, and the LED indicator will stop flashing and remain solid.

If the speaker has been paired before, it will automatically attempt to reconnect to the last paired device when powered on.

Operating Instructions

1. Basic Controls

The TOOGO M speaker features intuitive controls on its top panel. These buttons allow you to manage music playback, adjust volume, control LED lighting, and handle calls.

2. LED Lighting Modes

The speaker features 9 different RGB LED lighting modes that animate continuously to the rhythm of the music. Press the LED button to cycle through the available modes. Long press the LED button to turn the lights on or off.

3. Hands-Free Calling and Voice Assistant

With its integrated microphone, the TOOGO M speaker allows for hands-free calls. When a call comes in, short press the Power button to answer, and short press again to end the call. Long press to reject an incoming call.

You can also activate your device's voice assistant (Siri or Google Assist) through the speaker. Refer to your device's manual for specific voice assistant activation commands.

4. True Wireless Stereo (TWS) Pairing

For a more immersive audio experience, you can pair two TOOGO M speakers together to create a powerful stereo sound system.

1. Ensure both TOOGO M speakers are powered on and not connected to any other Bluetooth device.
2. On one of the speakers (this will be the primary speaker), double-press the Power button. It will enter TWS pairing mode.
3. The two speakers will automatically connect to each other. You will hear a confirmation sound once connected.
4. Now, connect your audio device to the primary speaker via Bluetooth as described in the "Bluetooth Pairing" section.

Once TWS paired, both speakers will play audio simultaneously, providing a stereo effect.

5. Micro SD Card Playback

Insert a Micro SD card containing your favorite songs into the designated slot on the speaker. The speaker will automatically switch to Micro SD card playback mode. Use the '+' and '-' buttons to navigate tracks and adjust volume.

Maintenance

Cleaning:

Wipe the speaker with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the surface. Ensure the charging port cover is securely closed before cleaning or exposing to water.

Storage:

When not in use for extended periods, store the speaker in a cool, dry place away from direct sunlight and extreme temperatures. It is recommended to charge the speaker at least once every three months to maintain battery health.

Water Resistance (IPX6):

The TOOGO M speaker is rated IPX6, meaning it is protected against powerful water jets. This makes it suitable for use near pools or in rainy conditions. However, it is not designed for submersion in water. Always ensure the charging port cover is tightly sealed before exposing the speaker to water.

Troubleshooting

Specifications

Warranty and Support

For warranty information and technical support, please refer to the warranty card included with your product or visit the official RYGHT website. Keep your proof of purchase for warranty claims.

Manufacturer: MOBILITY ELECTRONICS