KLADNDER Electric Heated Foot Warmer Instruction Manual

1. Introduction

Thank you for choosing the KLADNDER Electric Heated Foot Warmer. This product is designed to provide soothing warmth and comfort to your feet, helping to increase circulation, relieve tension, and keep you warm during colder periods. Its boot-shaped design ensures all-round heating, from the soles to the calves, making it ideal for use at home, in the office, or even in your car. Please read this manual carefully before use to ensure safe and optimal operation.

2. Important Safety Instructions

• Always disconnect the foot warmer from the power outlet when not in use or before cleaning.
• Do not use if the power cord or plug is damaged. Contact customer support for assistance.
• Keep the foot warmer away from water or other liquids. Do not immerse in water.
• Ensure the voltage of your power supply matches the requirements specified on the product label (120 Volts).
• This product features intelligent temperature sensing and automatic control power switch functions, including 60°C/140°F overheat protection to prevent burns.
• Do not use pins or other metallic objects with this appliance.
• Do not use while sleeping. The auto shut-off function (2H/4H/6H/8H) is designed for safety during extended use.
• Avoid folding or creasing the heating pad excessively during use, as this may damage the heating elements.
• Keep out of reach of children and pets.

3. Product Features

• 6 Heating Temperature Settings: Choose from 40°C/104°F to 60°C/140°F to suit your preference and ambient temperature.
• 4 Timer Settings: Equipped with an auto shut-off function for 2H, 4H, 6H, or 8H to save energy and enhance safety.
• All-round Fast Heating: The boot-shaped design with dense heating coils ensures quick and even heat distribution, warming the entire foot up to the calf within 10 minutes.
• High Security & Durable: Features a single circuit heating wire, intelligent temperature sensing, and 60°C/140°F overheat protection. The LED controller allows for easy heat adjustment.
• Removable & Machine Washable Inner Lining: Made of blanket fabric for super comfort and softness. The inner lining can be easily removed for cleaning, ensuring hygiene and prolonging product life.
• Universal Size: Measures 10.2*11*8.7 inches, accommodating a wide range of foot sizes for both men and women.

4. Setup

1. Unpack: Carefully remove the foot warmer and all accessories from the packaging.
2. Connect Controller: Locate the power cord with the controller. Plug the connector end of the power cord firmly into the port on the foot warmer. Ensure a secure connection.
3. Position: Place the foot warmer on a flat, stable surface where you intend to use it, such as under a desk or next to a sofa.
4. Plug In: Insert the power plug into a standard 120V AC electrical outlet.

5. Operating Instructions

1. Power On: Slide the ON/OFF switch on the controller to the 'ON' position. The LED display will illuminate.
2. Adjust Heat Level: Press the 'HEAT' button to cycle through the 6 temperature settings (1-6). The corresponding LED indicator will light up.
3. Set Timer: Press the 'TIMER' button to select your desired auto shut-off time: 2H, 4H, 6H, or 8H. The selected time will be indicated by an LED.
4. Insert Feet: Place your feet inside the foot warmer. For enhanced warmth, you can snap the top edges together using the integrated buttons to seal in heat around your ankles.
5. Power Off: To turn off the foot warmer, slide the ON/OFF switch to the 'OFF' position. Always unplug the unit from the wall outlet after use.

6. Maintenance

To ensure the longevity and hygiene of your foot warmer, follow these cleaning instructions:

1. Disconnect Power: Always unplug the foot warmer from the electrical outlet before cleaning.
2. Remove Inner Lining: The plush inner lining is removable. Unsnap the buttons securing it to the outer shell and gently pull it out.
3. Machine Washable: The inner lining can be machine washed on a gentle cycle with cold water. Do not bleach.
4. Drying: Tumble dry on low heat or air dry. Ensure the lining is completely dry before reinserting it into the foot warmer.
5. Outer Shell: The outer shell can be spot cleaned with a damp cloth. Do not immerse the outer shell or the controller in water.
6. Storage: When not in use, store the foot warmer in a cool, dry place.

7. Troubleshooting

• Foot Warmer Not Heating:
  • Ensure the power cord is securely plugged into both the foot warmer and the wall outlet.
  • Check if the ON/OFF switch on the controller is in the 'ON' position.
  • Verify that the wall outlet is functional by plugging in another appliance.
  • If the unit still does not heat, the overheat protection may have been activated. Unplug the unit, wait 30 minutes, and try again.
• Heat is Too Low/High:
  • Adjust the temperature setting using the 'HEAT' button on the controller.
  • Ensure the inner lining is properly inserted and the top edges are snapped together to retain heat.
• Controller Lights Not Working:
  • Check power connection as described above.
  • If the issue persists, contact customer support.

8. Specifications

9. Warranty & Support

For any questions, concerns, or support regarding your KLADNDER Electric Heated Foot Warmer, please refer to the contact information provided with your purchase or reach out to the seller directly. Keep your purchase receipt for any warranty claims.