Introduction
Thank you for choosing the Hoco ES61 Manner Sports Wireless Bluetooth Headset. This manual provides essential information for the proper use, maintenance, and troubleshooting of your new headset. Please read it carefully before use to ensure optimal performance and longevity of the product.
Product Overview
This image displays the Hoco ES61 headset in its red color variant, highlighting its ergonomic design for sports use. The flexible neckband connects the two earbuds, which feature ear hooks for a secure fit. Control buttons are visible on the left module.
This image shows the Hoco ES61 headset with its magnetic earbuds snapped together, demonstrating a convenient storage or wearing method when not in use. The red cable and black control units are clearly visible.
The headset is presented on a sleek metallic stand, showcasing its design and how it might be stored. A smartphone is visible in the background, suggesting connectivity.
Although this image shows the black variant, it illustrates the design of the ear tips and ear hooks, along with additional ear tip sizes provided for a customized fit. This helps users understand the components that come with their headset.
Setup
1. Charging the Headset
Before first use, fully charge the headset. The Hoco ES61 has a 200mAh battery capacity.
- Connect the charging cable to the headset's charging port and to a USB power source (e.g., computer USB port, wall adapter).
- The charging indicator light will illuminate during charging.
- Charging typically takes approximately 2 hours for a full charge.
- Once fully charged, the indicator light may change or turn off. Disconnect the charging cable.
2. Bluetooth Pairing
To connect your Hoco ES61 headset to a device (e.g., smartphone, tablet):
- Ensure the headset is turned off.
- Press and hold the multi-function button (usually the power button) until the indicator light flashes red and blue alternately, indicating pairing mode.
- On your device, enable Bluetooth and search for available devices.
- Select "Hoco ES61" from the list of found devices.
- Once connected, the indicator light will typically flash blue slowly or turn off, and you may hear a confirmation tone.
- Note: If prompted for a password, enter "0000".
3. TF Card Playback (Optional)
The Hoco ES61 supports TF card playback (up to 32GB).
- Insert a TF (microSD) card with your audio files into the designated slot on the headset.
- The headset will automatically switch to TF card playback mode if a card is detected.
Operating Instructions
| Function | Operation |
|---|---|
| Power On | Press and hold the multi-function button for approximately 3 seconds. |
| Power Off | Press and hold the multi-function button for approximately 3-5 seconds until the indicator light turns off. |
| Play/Pause Music | Press the multi-function button once. |
| Next Track | Press and hold the "Volume +" button. |
| Previous Track | Press and hold the "Volume -" button. |
| Volume Up | Press the "Volume +" button once. |
| Volume Down | Press the "Volume -" button once. |
| Answer/End Call | Press the multi-function button once during an incoming call. |
| Reject Call | Press and hold the multi-function button for approximately 2 seconds during an incoming call. |
| Redial Last Number | Double-press the multi-function button. |
| Switch Prompt Tone Language | In the unpaired state, double-click the multi-function button to switch between Chinese and English prompt tones. |
Maintenance
- Cleaning: Use a soft, dry cloth to clean the headset. Do not use harsh chemicals or abrasive materials.
- Storage: When not in use, store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the headset regularly, even if not in use for extended periods.
- Water Resistance: The headset is not waterproof. Avoid exposure to water, rain, or excessive moisture.
Troubleshooting
Common Issues and Solutions:
- Headset won't turn on:
Ensure the headset is fully charged. Connect it to a power source and allow it to charge for at least 30 minutes before attempting to power on again.
- Cannot pair with device:
Make sure the headset is in pairing mode (indicator light flashing red and blue). Ensure Bluetooth is enabled on your device and it is within range (typically 10 meters). Try turning off and on both the headset and your device's Bluetooth. If previously paired, try deleting "Hoco ES61" from your device's Bluetooth list and re-pairing.
- No sound or low volume:
Check the volume levels on both the headset and your connected device. Ensure the headset is properly connected to your device. If using TF card, ensure audio files are in a compatible format and the card is inserted correctly.
- Intermittent connection:
Move closer to your connected device to reduce interference. Avoid obstacles between the headset and device. Ensure no other strong wireless signals are interfering.
Specifications
| Feature | Detail |
|---|---|
| Bluetooth Version | Bluetooth 5.1 |
| Bluetooth Chip | JL AC7006 |
| Battery Capacity | 200mAh |
| Charging Time | Approximately 2 hours |
| Talk/Music Time | Up to 20 hours |
| Standby Time | Up to 330 hours |
| Earphone Cord Length | 85 cm |
| Weight | 22g |
| Supported Playback | Bluetooth, TF card (≤32G) |
| Prompt Tone Language | Chinese, English (switchable) |
| Ear Placement | In Ear |
| Form Factor | In Ear |
| Noise Control | None |
| Manufacturer | Hoco |
| Country of Origin | China |
Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or contact your retailer. HOCO products typically come with a standard manufacturer's warranty covering defects in materials and workmanship.
Extended warranty options may be available from your retailer. Please check with your point of purchase for details on available protection plans.
For technical assistance or further inquiries, please visit the official HOCO website or contact their customer service.
