ProcareSelect Disc Cleaning and Repairing Kit PRO

Introduction

The ProcareSelect Disc Cleaning and Repairing Kit PRO is designed to provide comprehensive care solutions for various optical discs. Regular cleaning and maintenance are essential to prolong the life and ensure optimal performance of your discs. This kit is compatible with a wide range of optical media, including CD, DVD, Blu-Ray, data discs, game discs, and music discs.

This manual provides detailed instructions for the proper use and maintenance of your device, ensuring effective cleaning and repair of your valuable disc collection.

Product Contents

Carefully unpack the box and ensure all items listed below are present and in good condition.

• Disc Cleaning & Repairing PRO Device
• AC Power Adapter (US Plug) x1
• Mini Brush x1 Pcs
• Disc Cleaning Fluid 20cc x1 Bottle
• Disc Repairing Fluid 10cc x1 Bottle
• Cleaning Pads – Blue x2 PCs
• Buffing Pads – Pink x2 PCs
• Repairing Pads – Yellow x2 PCs
• Instruction Manual (English) x1 (This document)

Figure 1: Included pads, fluids, and mini brush.

Figure 2: The device with its internal storage for accessories.

Setup

Before operating the device, ensure it is properly set up.

1. Place the Disc Cleaning & Repairing PRO Device on a stable, flat surface.
2. Locate the power socket on the device.
3. Securely plug the AC Power Adapter into the power socket of the main body.
4. Plug the power adapter into a standard electrical outlet.

Figure 3: Product components and layout.

Operating Instructions

The device offers three primary operations: Buffing, Repairing, and Cleaning. Follow the steps below for each process.

Important Notes Before Operation:

• Do not press the power button when no disc is placed inside the unit.
• The fluid color may change over time, but this does not affect the repairing performance.
• Always shake fluid bottles well before use to ensure the solution is properly mixed.
• The entire set of pads and fluids is designed for approximately 50 uses.

1. Buffing (for reconditioning discs)

Buffing is the first step in the reconditioning process for discs with minor imperfections.

1. Open the cover plate of the device.
2. Place the pink buffing pads onto the left and right mounting shafts inside the unit.
3. Carefully insert the disc into the device.
4. Press the power button to start the buffing cycle. The process will automatically stop after approximately 2 to 3 minutes.
5. Once the cycle is complete, open the cover plate and retrieve the disc. Proceed to the Repairing step.

2. Repairing (for reconditioning discs)

Repairing is the second step for reconditioning, targeting surface scratches.

1. Place the yellow repair pads onto the left and right mounting shafts.
2. Apply approximately two drops of the repair fluid (from the 10cc cylindrical bottle) onto the right-side yellow pad.
3. Insert the disc into the device.
4. Press and hold the power button for 3 seconds to initiate the smooth repair process. The device will stop automatically once complete.
5. Retrieve the disc. For discs with deep scratches, repeat the Buffing and Repairing steps until desired results are achieved.

3. Cleaning (for regular maintenance or final step of reconditioning)

Cleaning removes smudges, fingerprints, oil, and dirt from discs.

1. Place the blue cleaning pads onto the left and right mounting shafts.
2. Apply approximately two drops of the disc cleaning fluid (from the 20cc rectangular bottle) onto the right-side blue pad.
3. Insert the disc into the device.
4. Press the power button to start the cleaning cycle. The device will stop automatically once complete.
5. Retrieve the disc.

Maintenance

Proper maintenance ensures the longevity and effectiveness of your ProcareSelect Disc Cleaning and Repairing Kit PRO.

• Pad Cleaning: After each use, it is recommended to brush off any accumulated dust or residue from the pink buffing pads. Use the provided mini brush and brush in a parallel stroke motion to the groove repeatedly to cleanly remove dust. This prevents dust buildup from affecting buffing performance.
• Fluid Storage: Store the cleaning and repairing fluids in a cool, dry place away from direct sunlight. Ensure bottle caps are tightly sealed after use.
• Device Cleaning: Periodically wipe the exterior of the device with a soft, dry cloth to remove dust. Do not use abrasive cleaners or immerse the device in water.

Troubleshooting and Important Notes

This section addresses common questions and important considerations regarding disc repair.

• This unit is designed to return a damaged disc to a readable and writable condition. However, it will not erase any physical scars or deep scratches that are present on the disc surface.
• During the repairing process, it is normal for circular marks to appear on the disc. These marks are a result of the resurfacing process and do not indicate damage to the disc.
• If a disc is faulty due to its original production or manufacturing defects, this unit will not be able to repair it.
• The device cannot repair discs where the scratch has penetrated into the inner foil layer of the disc. Such damage is typically irreparable.
• If the device does not start, ensure the power adapter is securely plugged into both the device and a working electrical outlet.

Specifications

Figure 4: General Information and Specifications.

Support

For further assistance, product information, or to inquire about replacement parts and fluids, please visit the official Procare corporate website:

www.procare.com.tw

Please refer to the website for the most up-to-date support information and contact methods.