JVC KD-SR87BT

JVC KD-SR87BT Bluetooth CD Car Stereo User Manual

Model: KD-SR87BT

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your JVC KD-SR87BT Bluetooth CD Car Stereo. Please read this manual thoroughly before using the unit to ensure proper operation and to prevent damage.

What's in the Box

Verify that all items listed below are included in your package:

  • CD Car Stereo (with 10A fuse)
  • Face Plate (attached)
  • Sleeve (installed)
  • Trim Ring (installed)
  • Wiring Harness
  • Microphone with Bracket
  • 2 Radio Removal Tools
  • Face-Fixing Screw
  • Quick Start Guide
  • Warranty Information
Contents of the JVC KD-SR87BT package
Image: Contents of the JVC KD-SR87BT package, including the main unit, wiring harness, microphone, removal tools, and documentation.

Setup and Installation

Proper installation is crucial for optimal performance. If you are unsure about any steps, professional installation is recommended.

Installation Dimensions

The unit is a single DIN receiver. Refer to the following dimensions for installation:

  • Width: 7-3/16 inches (182 mm)
  • Height: 2-3/16 inches (53 mm)
  • Depth: 6-1/8 inches (156 mm)

Wiring Connections

Connect the included wiring harness to your vehicle's wiring. Ensure all connections are secure and insulated. The unit features 2-channel preamp outputs (2.5-volt rear/sub) for external amplifiers.

Rear view of JVC KD-SR87BT showing wiring connections
Image: Rear view of the JVC KD-SR87BT unit, displaying the various wiring connections and RCA outputs.

Detachable Face Plate

The unit features a detachable face plate for security. To remove, press the release button and gently pull the face plate away from the main unit. To reattach, align the face plate with the main unit and push until it clicks into place.

Operating Instructions

This section details the primary functions and controls of your JVC KD-SR87BT car stereo.

Front Panel Overview

Front panel of JVC KD-SR87BT car stereo
Image: Front panel of the JVC KD-SR87BT car stereo, highlighting the LCD display, rotary knob, and various control buttons.

The front panel includes an LCD display, a rotary volume knob, and various control buttons for source selection, track navigation, and menu access. The USB port and auxiliary input are located on the front for easy access.

Basic Functions

  • Power On/Off: Press the SRC button to turn the unit on. Press and hold the SRC button to turn it off.
  • Source Selection: Press the SRC button repeatedly to cycle through available sources (CD, USB, Bluetooth Audio, AM/FM Radio, AUX).
  • Volume Control: Rotate the large central knob to adjust the volume level.
  • Menu Navigation: Access the menu system using the small buttons on the left and right ends of the main button row. These buttons are multi-functional and their operation depends on the current menu context.

Radio Operation

  • Tuning: Use the seek buttons to find radio stations.
  • Preset Stations: Store and recall your favorite AM/FM stations using the numbered preset buttons (1-6).

CD/USB Playback

Insert a CD into the disc slot or connect a USB memory device to the front USB port. The unit will automatically detect and begin playback. It supports MP3, WMA, WAV, ACC, and high-res FLAC files.

  • Track Navigation: Use the forward and backward buttons to skip tracks.
  • Folder Search: While USB playback is active, use the search function to navigate through folders on your USB device.

Bluetooth Features

The KD-SR87BT includes built-in Bluetooth for wireless audio streaming and hands-free calling.

  • Pairing: Enable Bluetooth on your smartphone and search for the JVC unit. Select it to pair. The unit can control two phones simultaneously.
  • Audio Streaming: Stream music wirelessly from your smartphone or compatible apps like Pandora and Spotify.
  • Hands-Free Calling: Use the included microphone for hands-free calls. The phone control button is located below the volume knob. Voice recognition dialing is supported.
Smartphone streaming music to JVC KD-SR87BT via Bluetooth
Image: A smartphone displaying a music streaming app, wirelessly connected to the JVC KD-SR87BT car stereo via Bluetooth.

USB Charging

The front USB port provides 1.5A charging, allowing you to rapidly charge compatible smartphones and devices.

Smartphone charging via JVC KD-SR87BT USB port
Image: A smartphone connected to the JVC KD-SR87BT's front USB port, indicating rapid charging in progress.

Audio Settings

The unit features a 13-band equalizer with digital time alignment. K2 technology enhances digital sound quality by expanding the frequency range.

Diagram illustrating K2 Technology sound enhancement
Image: Diagram illustrating the effect of K2 Technology, showing an expanded frequency range for enhanced digital sound.
Diagram illustrating Time Alignment for optimal sound staging
Image: Diagram illustrating Time Alignment, showing how sound is optimized for the listener's position within the vehicle.

Access the Audio Settings menu to adjust the equalizer, balance, and fade. Note that some users find the menu navigation for these settings to be less intuitive, requiring multiple steps to adjust each parameter.

JVC Remote App

The unit is compatible with the JVC Remote App, allowing you to control various functions from your smartphone.

Smartphone displaying JVC Remote App interface
Image: A smartphone screen showing the JVC Remote App interface, used for controlling the car stereo.

Maintenance

Regular maintenance helps ensure the longevity and performance of your car stereo.

  • Cleaning the Face Plate: Gently wipe the detachable face plate with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
  • Cleaning the Disc Slot: Use a commercially available CD cleaner disc if you experience issues with CD playback.
  • General Cleaning: Keep the main unit and surrounding area free of dust and debris.

Troubleshooting

This section addresses common issues you might encounter with your JVC KD-SR87BT unit.

Common Issues and Solutions

ProblemPossible CauseSolution
No PowerBlown fuse; incorrect wiring; vehicle battery issue.Check the 10A fuse on the unit and replace if necessary. Verify all wiring connections. Check vehicle battery.
No SoundVolume too low; mute activated; incorrect speaker wiring; incorrect audio source.Increase volume. Deactivate mute. Check speaker connections. Select correct audio source.
Bluetooth Connection IssuesDevice not in pairing mode; unit not discoverable; interference.Ensure both devices are in pairing mode. Delete previous pairings and re-pair. Move closer to the unit.
Clock Resets/Loses TimePower interruption; cold weather conditions.Ensure the stereo is turned off before turning off the vehicle. In very cold weather, this issue may persist.
Difficulty with Menu NavigationUnfamiliarity with multi-function buttons.Refer to the Quick Start Guide for detailed button functions. Practice navigating menus while the vehicle is stationary.

Specifications

FeatureDetail
Model NumberKD-SR87BT
Product Dimensions (WxHxD)7-3/16" x 2-3/16" x 6-1/8" (182 x 53 x 156mm)
Item Weight3.16 pounds
Power OutputMax 50 Watts x 4 channels
Connectivity TechnologyAuxiliary, Bluetooth, USB
Controller TypeAndroid (compatible)
Special Features13-Band Equalizer, K2 Technology, Digital Time Alignment, Detachable Face Plate, USB 1.5A Charging
Compatible DevicesSmartphone, Speaker
Connector Type3.5mm Jack, USB
Audio Output ModeStereo
Surround Sound Channel Configuration2 Channel
ColorBlack

Warranty and Support

Warranty Information

All JVC products, including the KD-SR87BT, come with a 1-year manufacturer's warranty. Please refer to the included Warranty Information document for full details regarding coverage and claims.

Customer Support

For further assistance, technical support, or service inquiries, please visit the official JVC website or contact JVC customer service. Contact information can typically be found in the Quick Start Guide or on the JVC website.