1. Introduction
This manual provides instructions for the Allimity KT1440 Replacement Remote Control. This infrared (IR) remote is designed to function as a direct replacement for various TV and DVD models from brands such as Haier, Panda, ATEC, Gelec, Soyea, CRT Parker, and Wentai. It requires no programming and operates by simply inserting batteries.
2. Package Contents
Verify that all items are present in your package:
- 1 x Allimity KT1440 Replacement Remote Control
- (Batteries are not included)
3. Setup
3.1 Battery Installation
- Locate the battery compartment cover on the back of the remote control.
- Press down on the tab and slide the cover downwards to open the compartment.
- Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Note: Always replace both batteries simultaneously with new ones. Do not mix old and new batteries, or different types of batteries.
4. Operating Instructions
4.1 Basic Operation
The Allimity KT1440 remote control is designed for immediate use without any programming. Once batteries are installed, point the remote directly at your compatible device (TV, DVD player, set-top box) and press the desired function button.
Figure 1: Front view of the Allimity KT1440 Replacement Remote Control, showing all buttons and their labels.
4.2 Compatible Devices
This remote control is compatible with a range of devices, including but not limited to:
- Haier TVs: 21' CRT, 29' CRT, ATEC DTV
- Panda TVs: 21' CRT
- Soyea Devices: DTV, SPD160 (Set-top box)
- ATEC Devices: DTV, Híbrido
- Parker TVs: 21' TV2195, 14' TV14F5
- KONKA Devices: All Hybrid TVs, All Analog TVs, All Set-top boxes
- Wentai DVDs: 3031/3032
- AV Link DVDs: LW 109A
- Mico Set-top boxes: DT46-N03, DT25-2080
- RealTv Set-top boxes: HMA1
- Gelec Devices: SD-HL-215G, HD-HL-1209
- Runch Set-top boxes: All models
This list is based on manufacturer specifications and may not be exhaustive.
5. Maintenance
5.1 Cleaning
To clean the remote control, use a soft, dry cloth. For stubborn dirt, lightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or abrasive materials, as these can damage the remote's surface or internal components.
5.2 Battery Care
If the remote control will not be used for an extended period, remove the batteries to prevent leakage, which can cause damage to the device.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote is not responding. | Dead or incorrectly inserted batteries. | Replace batteries with new AAA batteries, ensuring correct polarity. |
| Remote has limited range or intermittent response. | Weak batteries; Obstruction between remote and device; Remote not pointed directly at device. | Replace batteries. Ensure a clear line of sight to the device's IR receiver. Point the remote directly at the device. |
| Certain buttons do not work. | Device incompatibility for specific functions; Button malfunction. | Verify your device is listed as compatible. If the issue persists, contact support. |
7. Specifications
- Model: KT1440
- Brand: ALLIMITY
- Connectivity Technology: Infrared (IR)
- Compatible Devices: Television, DVD Players, Set-top Boxes (as listed in Section 4.2)
- Power Source: 2 x AAA Batteries (not included)
- Product Dimensions: 6.5 x 1.38 x 0.72 inches (16.5 x 3.5 x 1.8 cm)
- Item Weight: 2.5 ounces (70.8 grams)
- Special Feature: Ergonomic design
- Max Number of Supported Devices: 18 (refers to the number of different device types it can replace, not simultaneous control)
8. Warranty and Support
For any questions, technical assistance, or warranty inquiries regarding your Allimity KT1440 Replacement Remote Control, please contact the seller or manufacturer directly through your purchase platform. Please have your purchase details and model number (KT1440) available when contacting support.