Lamshaw H76 Smart Watch Charger Cable
Lamshaw Magnetic USB Charging Cable User Manual
Model: H76 Smart Watch Charger Cable
Introduction
Thank you for choosing the Lamshaw Magnetic USB Charging Cable. This product is specifically designed as a replacement charger for the Mingtawn H76 Smart Watch 1.57 inch. It features a magnetic connection for easy and secure charging, and a built-in chip to help prolong the service life of your watch. This manual provides essential information for the proper use and care of your charging cable.
Product Overview
Image: Two Lamshaw magnetic USB charging cables. The white cable features a magnetic charging end with two gold-colored contact pins and a standard USB-A connector. The black cable also has a magnetic charging end with two silver-colored contact points and a standard USB-A connector. Both cables are shown with their respective magnetic charging pads and USB plugs.
Setup
- Unpack the Cable: Carefully remove the charging cable from its packaging.
- Identify Components: The cable consists of a magnetic charging end and a standard USB-A connector.
- Connect to Power Source: Insert the USB-A connector into a compatible USB power adapter (e.g., wall charger, computer USB port, power bank). Ensure the power source provides a stable 5V output.
Operating Instructions
- Position the Smart Watch: Place your Mingtawn H76 Smart Watch near the magnetic charging end of the cable.
- Magnetic Connection: The magnetic end of the cable will automatically align and attach to the charging contacts on your smart watch. Ensure a secure connection.
- Verify Charging: Once connected, your smart watch should indicate that it is charging (e.g., a charging icon on the screen).
- Charging Time: Charging time may vary depending on the watch's battery level and the power source. Refer to your smart watch's manual for typical charging durations.
- Disconnecting: Gently pull the magnetic charging end away from the smart watch to disconnect.
Maintenance
- Cleaning: Use a soft, dry cloth to wipe the cable and magnetic contacts. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tangling the cable to prevent damage.
- Handling: Do not bend the cable excessively or pull it by the cord when disconnecting. Always grasp the connectors.
- Water Exposure: This cable is not waterproof. Avoid exposing it to water or other liquids.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch not charging | Loose connection; Faulty power source; Dirty contacts; Incompatible watch model | Ensure magnetic end is securely attached; Try a different USB port or power adapter; Clean magnetic contacts on cable and watch; Verify your watch is a Mingtawn H76 Smart Watch 1.57 inch. |
| Slow charging | Low power output from USB source; Background apps on watch | Use a higher-output USB power adapter (e.g., 5V/1A); Close unnecessary apps on your watch. |
| Cable appears damaged | Physical stress; Improper storage | Discontinue use immediately; Replace the cable. |
Specifications
- Brand: Lamshaw
- Compatible Devices: Mingtawn H76 Smart Watch 1.57 inch
- Connector Type: Magnetic (watch end), USB-A (power source end)
- Special Feature: Magnetic connection, Built-in chip for watch service life prolongation
- Color: Available in Black and White (2 pack-Black+White variant)
- Item Weight: Approximately 1.76 ounces
- Package Dimensions: Approximately 3.94 x 1.97 x 0.39 inches
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.