TANBABY LED Garage Light

TANBABY 150W Deformable LED Garage Light (2-Pack) Instruction Manual

Model: LED Garage Light | Brand: TANBABY

1. Introduction

Thank you for choosing the TANBABY 150W Deformable LED Garage Light. This product is designed to provide high-brightness, adjustable illumination for various indoor spaces such as garages, basements, warehouses, and workshops. This manual provides essential information for safe installation, operation, and maintenance of your new LED lights.

2. Safety Information

  • Always turn off the power supply before installing or replacing the light.
  • Ensure the light is securely screwed into the lamp holder to prevent accidental detachment.
  • Do not look directly into the LED light when it is illuminated, as this may cause eye strain or damage.
  • This product is designed for indoor use only and is not water-resistant. Avoid exposure to moisture or wet conditions.
  • Do not disassemble or modify the light. Unauthorized modifications may void the warranty and pose safety risks.
  • This light is not a motion-sensing garage light.

3. Package Contents

  • 2 x TANBABY 150W Deformable LED Garage Lights
  • 2 x E26/E27 Lamp Holders (optional, for new installations)

4. Specifications

BrandTANBABY
Model NameLED Garage Light
Wattage150 Watts
Brightness15000 Lumens
Color Temperature6500 Kelvin (Daylight White)
Bulb BaseE26/E27
Lifespan50,000+ Hours
MaterialPlastic
Product Dimensions11"L x 6.6"W x 5"H
Indoor/Outdoor UsageIndoor

5. Installation

  1. Prepare for Installation: Ensure the power to the light fixture is turned off at the circuit breaker before beginning installation.
  2. Remove Existing Bulb: Carefully unscrew and remove any existing light bulb from the E26/E27 lamp holder.
  3. Install the LED Light: Screw the TANBABY LED Garage Light directly into the standard E26/E27 lamp holder. No additional tools or wiring are required.
  4. Adjust Panels: Once installed, adjust the six deformable LED panels to direct light to your desired areas. Each panel can be angled up to 90 degrees.
  5. Restore Power: Turn the power back on at the circuit breaker.
Person installing a TANBABY LED garage light into a ceiling socket.
Figure 1: Simple screw-in installation of the LED garage light into a standard E26/E27 lamp holder, requiring no special tools.
Diagram showing the 90-degree adjustability of the LED garage light panels.
Figure 2: The 6+1 panel design allows each of the six outer panels to be adjusted up to 90 degrees for customized 360-degree lighting coverage.

6. Operating Instructions

The TANBABY LED Garage Light operates like a standard light bulb. Simply use your existing wall switch to turn the light ON or OFF. The adjustable panels allow you to customize the light distribution to suit your needs.

Adjusting the Panels:

  • Gently hold the central body of the light.
  • Carefully move each of the six outer LED panels to your desired angle. The panels are designed to pivot up to 90 degrees.
  • Direct the light towards specific work areas or spread it out for broader ambient lighting.
Image showing deformable panels of the LED garage light radiating beams to all corners.
Figure 3: The deformable panels can be folded from 0-90 degrees to radiate light beams to all corners, providing comprehensive illumination.

7. Maintenance

  • Cleaning: Ensure the light is turned off and cool before cleaning. Use a soft, dry cloth to wipe the surfaces. Do not use abrasive cleaners or solvents.
  • Inspection: Periodically check the light for any signs of damage or loose connections. If any issues are found, discontinue use and contact customer support.
Diagram illustrating the double-layer cooling system and LED chip technology of the TANBABY garage light.
Figure 4: The light features an efficient double-layer cooling system to ensure proper function and extend its lifespan.

8. Troubleshooting

  • Light does not turn on:
    • Check if the power switch is in the ON position.
    • Ensure the light is securely screwed into the lamp holder.
    • Verify that the circuit breaker for the light fixture is not tripped.
  • Light flickers:
    • Ensure the light is securely screwed into the lamp holder.
    • Check for any loose wiring in the fixture (if applicable, consult a qualified electrician).

9. Warranty and Support

The TANBABY 150W Deformable LED Garage Light comes with a 2-year warranty. If you encounter any product problems within this period, please contact TANBABY customer service via Amazon. Our professional support team is available to assist you with any questions or concerns.

Graphic indicating 100% satisfactory after-sales service and a 720-day warranty for TANBABY products.
Figure 5: TANBABY offers a 2-year warranty and dedicated customer support for all product inquiries.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.