Product Overview
This JINYISI 4-piece 12V LED interior light kit is designed to replace existing incandescent bulbs in specific locations of your Honda HR-V (Vezel) models from 2014 to 2019. The kit includes LED bulbs for the front row reading lights, rear row reading light, and trunk light, providing enhanced illumination and energy efficiency.
Image: Overview of the JINYISI LED interior light kit, demonstrating different light color options and the various bulb types included.
Image: Interior view of a vehicle, likely a Honda HR-V, with the JINYISI LED lights installed, showcasing the bright white light output in the cabin and trunk area.
Package Contents
- 2 x Front Row Reading Lights
- 1 x Rear Row Reading Light
- 1 x Trunk Light
- 1 x Installation Tool (Screwdriver)
Image: A collection of different JINYISI LED bulb types included in the kit, alongside a small screwdriver, which is provided as an installation tool.
Specifications
| Brand | JINYISI |
| Light Source Type | LED |
| Voltage | 12V |
| Lumens | 2400Lm |
| Interface Type | T10 (W5W/194) |
| Item Weight | 0.03kg |
| Compatible Vehicles | Honda HR-V (Vezel) 2014-2019 |
Image: A detailed diagram illustrating the internal components of a JINYISI LED bulb, including the highlight lamp beads, fiberglass board, aluminum material, and circuit board.
Setup and Installation
Important Safety Note: Before beginning installation, ensure your vehicle's ignition is off and the corresponding light circuit is de-energized. Old bulbs may be hot; handle with care.
- Locate the Light Fixture: Identify the specific light fixture (e.g., front reading light, trunk light) where you intend to replace the bulb.
- Remove Cover: Carefully use a plastic pry tool or the provided screwdriver to gently pry open the plastic cover of the light fixture.
- Remove Old Bulb: Once the cover is removed, carefully extract the old incandescent bulb from its socket. Be cautious as the bulb may be hot.
- Install New LED Bulb: Insert the new JINYISI LED bulb into the socket. Ensure it is seated firmly.
- Test Functionality: Turn on the vehicle's ignition and activate the light to check if the new LED bulb illuminates. If it does not light up, remove the bulb, rotate it 180 degrees, and reinsert it. LED bulbs are polarity sensitive.
- Secure Connection (Festoon Bulbs): For festoon-type bulbs, if the bulb feels slightly loose, gently move the metal pin clips in the socket closer together to ensure a tighter connection.
- Replace Cover: Once the LED bulb is functioning correctly, snap the light fixture cover back into place.
Image: A four-panel visual guide demonstrating the installation process: 1) Prying open the light cover, 2) Removing the original bulb, 3) Inserting the new LED bulb, and 4) Securing the fixture.
Operating Instructions
The JINYISI LED interior lights operate in the same manner as your vehicle's original lights. Use your vehicle's standard switches to turn the reading lights, dome lights, or trunk light on and off. These LED bulbs provide a super bright white light, enhancing visibility within your vehicle's interior.
Image: A side-by-side comparison showing the interior of a car with standard, dimmer lighting (Before) and the same interior illuminated by the brighter JINYISI LED lights (After).
Maintenance
JINYISI LED bulbs are designed for long-term performance with minimal maintenance. They feature low power consumption and a long lifespan, reducing the need for frequent replacements. Keep the light covers clean to ensure maximum light output. Avoid using abrasive cleaners on the LED bulbs or their covers.
Troubleshooting
- Light Does Not Turn On:
- Ensure the vehicle's light switch is in the 'ON' position.
- Remove the LED bulb, rotate it 180 degrees, and reinsert it. LED bulbs are polarity sensitive and will only work when inserted correctly.
- Check the metal pin clips in the socket for festoon bulbs. If they are too far apart, gently push them closer together to ensure a secure connection with the bulb's ends.
- Verify that the vehicle's fuse for the light circuit is intact.
- Flickering Light:
- Ensure the bulb is securely seated in the socket. A loose connection can cause flickering.
- Check for any corrosion in the socket that might interfere with the electrical contact.
- Error Message on Dashboard:
- These bulbs are designed with built-in load resistors to be error-free for most vehicles. If an error still occurs, consult a professional automotive technician.
Support
If you encounter any issues or have questions regarding the JINYISI 4-Piece 12V LED Interior Light Kit, please contact our customer support. We are committed to providing timely assistance and satisfactory solutions.