VASAGLE ULET318T14 Side Table with Charging Station Instruction Manual

Introduction

Thank you for choosing the VASAGLE ULET318T14 Side Table with Charging Station. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image: The VASAGLE ULET318T14 Side Table, featuring a rustic walnut top and white frame, positioned beside a bed. It includes a drawer and an open lower shelf.

Safety Information

• Always follow the assembly instructions step-by-step.
• Do not overtighten screws during assembly, as this may damage the wood or strip the screw heads.
• Ensure all connections are secure before using the table.
• Keep small parts and packaging materials away from children.
• Place the table on a level surface to prevent tipping.
• Do not exceed the maximum static load capacity of 200 lb (90.7 kg).
• For electrical components, ensure the power cord is not pinched or damaged. Do not expose the charging station to liquids.

Package Contents

Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• 1 x Side Table (disassembled components)
• 1 x Accessory Bag (screws, dowels, tools, etc.)
• 1 x Instruction Manual (physical copy)

Assembly Instructions

Assembly typically requires two people and may take approximately 1-2 hours. It is recommended to wear gloves during assembly to prevent blisters from handling screws.

1. Unpack and Identify Parts: Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches. Refer to the included parts list in the physical instruction manual to identify each piece.
2. Assemble the Frame: Begin by attaching the legs to the side panels using the provided screws and dowels. Ensure connections are snug but do not overtighten.
3. Install Shelves: Secure the bottom shelf to the assembled frame.
4. Assemble the Drawer: Construct the drawer according to the instructions, then install the drawer slides onto both the drawer and the table frame. Insert the drawer into its compartment.
5. Attach Tabletop and Charging Station: Secure the tabletop. Install the charging station unit into its designated compartment under the liftable section of the tabletop. Connect the power cord.
6. Final Checks: Ensure all screws are tightened and the table is stable. Adjust the foot pads if necessary to level the table on uneven floors.

Image: A detailed diagram illustrating the dimensions of the side table, including its overall height (23.6"), width (13.8"), depth (23.6"), and the internal drawer dimensions (10" D x 13.3" W x 5.7" H).

Operating Instructions

Using the Charging Station

The VASAGLE ULET318T14 Side Table features a built-in charging station for convenient power access.

• Accessing Outlets: Gently lift the hinged section of the tabletop to reveal the integrated power strip.
• Power Connection: Plug the table's 6.5-foot power cord into a standard 120V wall outlet.
• Charging Devices: The charging station includes two 120V/12A AC outlets and two 5V/2A USB ports. You can charge up to four devices simultaneously, such as lamps, phones, tablets, and laptops.
• Cable Management: The design allows cables to pass through a small opening, keeping the tabletop tidy when the hinged section is closed.

Image: A close-up view of the side table's top, with a section lifted to reveal the hidden power strip containing two AC outlets and two USB ports, actively charging a smartphone.

Storage Features

• Drawer: Utilize the smooth-gliding drawer for discreet storage of smaller items like remote controls, glasses, or personal belongings.
• Open Shelf: The lower open shelf provides additional storage space for books, magazines, or decorative items.

Image: The open drawer of the side table, showcasing its internal capacity, with a remote control and a book placed inside.

Maintenance

• Cleaning: Wipe the table surfaces with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
• Spills: Clean up spills immediately to prevent staining or damage to the wood and electrical components.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• Electrical Safety: Ensure the power cord and charging unit are free from damage. Do not attempt to repair electrical components yourself.

Image: A close-up view of the adjustable foot pads on the bottom of the table legs, designed to protect floors and ensure stability.

Troubleshooting

Specifications

Warranty and Customer Support

For warranty information, missing parts, or any questions regarding your VASAGLE ULET318T14 Side Table, please contact VASAGLE customer support through the retailer's platform or the official VASAGLE website. Please have your model number (ULET318T14) and purchase details ready when contacting support.