AONELAS ELYKEN Narrow Console Sofa Table User Manual

Introduction

Thank you for purchasing the AONELAS ELYKEN Narrow Console Sofa Table. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and efficient use of your new console table. Designed to fit seamlessly behind your sofa, this table offers convenient surface space and integrated power outlets for charging your devices.

Figure 1: The AONELAS ELYKEN Narrow Console Sofa Table, showcasing its slim design and integrated power cords.

Safety Instructions

• Read all instructions carefully before assembly and use.
• Keep all packaging materials away from children.
• Ensure all parts are present and undamaged before beginning assembly.
• Do not overtighten screws during assembly to avoid damaging the material.
• Place the table on a flat, stable surface.
• Do not exceed the maximum weight recommendation of 100 lbs (45.36 kg) for the tabletop.
• Only use the integrated power outlets for devices within the specified voltage and amperage limits (120V/12A AC, 5V/2A USB).
• Keep liquids away from the power outlets and electrical components.
• Do not attempt to modify or repair the electrical components. Contact qualified personnel for service.

Parts List

Before assembly, verify that all components listed below are included in your package.

Note: Some components may be pre-attached or integrated into larger parts.

Setup and Assembly

Follow these steps to assemble your console sofa table. It is recommended to have two people for easier assembly.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Attach Frame Legs: Connect the Left Frame Leg (B) and Right Frame Leg (C) to the Middle Support Legs (D) using the provided hardware. Ensure all connections are secure but do not fully tighten screws yet.
3. Install Bottom Crossbars: Attach the Bottom Crossbars (E) between the frame legs. This will provide stability to the base.
4. Secure Tabletop: Carefully place the Tabletop (A) onto the assembled frame. Align the pre-drilled holes on the tabletop with the holes on the frame. Secure the tabletop to the frame using the remaining hardware.
5. Tighten All Screws: Once all parts are aligned and loosely assembled, gradually tighten all screws until they are firm. Do not overtighten.
6. Integrate Power Outlet Units: The power outlet units (F) are pre-installed into the tabletop. Ensure their cables are routed correctly and are not pinched.

Figure 2: Dimensional diagram of the console table, illustrating its overall length, height, and depth, along with the power cord length.

Figure 3: Illustration comparing the stability and load-bearing capacity of a one-piece tabletop design (110 lbs) versus a three-piece tabletop design (100 lbs).

Operating Instructions

Your AONELAS ELYKEN console table is designed for convenience, featuring integrated power outlets.

• Placement: Position the console table behind your sofa or against a wall. Its narrow design is ideal for tight spaces.
• Power Connection: Plug the 6.5-foot extension cord from the table's power outlet unit into a standard wall outlet.
• Using AC Outlets: The table includes two 120V/12A AC outlets. Plug in small appliances, lamps, or chargers directly into these outlets.
• Using USB Ports: The table also features two 5V/2A USB ports. Connect your smartphones, tablets, or other USB-powered devices for charging.
• Adjustable Charging Station: The integrated charging station can be positioned on the side or in the middle of the tabletop, depending on your preference and setup.

Figure 4: The console table positioned behind a sofa, demonstrating its practical use as a surface for decor and a charging station in a living room environment.

Figure 5: Two images illustrating the flexibility of the charging station, showing it placed on the side and in the middle of the console table for user convenience.

Figure 6: A detailed view of the power outlet unit, highlighting its two 120V/12A AC outlets, two 5V/2A USB ports, and the 6.5-foot power cord.

Maintenance

Proper care will extend the life of your console table.

• Cleaning: Wipe the tabletop and metal frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
• Spills: Immediately wipe up any spills, especially near the power outlets, to prevent damage.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• Electrical Components: Keep the power outlets and cords free from dust and debris. Do not immerse any part of the electrical components in water.

Troubleshooting

If you encounter issues with your console table, refer to the following common problems and solutions.

Specifications

Warranty and Support

For warranty information or if you require assistance with your AONELAS ELYKEN console table, please refer to your purchase documentation or contact the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.

For technical support or missing parts, please reach out to the manufacturer's customer service. Contact details are typically found on the product packaging or the brand's official website.