Feit Electric LED Mini E11 Warm White 50W Equivalent Bulb Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient use of your Feit Electric LED Mini E11 Warm White 50W Equivalent Bulb. Please read these instructions thoroughly before installation and retain them for future reference.

2. Product Overview

The Feit Electric LED Mini E11 bulb is designed to provide efficient, warm white illumination. It is a direct replacement for traditional 50-watt incandescent bulbs, consuming only 4.5 watts of power.

Key Features:

• Instant on to full brightness.
• Non-dimmable operation.
• Constructed with high-quality materials for extended lifespan.
• Energy-efficient 4.5-watt power consumption.
• Mini Candelabra (E11) bulb shape type.

Figure 1: Feit Electric LED Mini E11 Warm White 50W Equivalent Bulb in its retail packaging, highlighting its specifications and design.

3. Safety Information

Observe the following safety precautions to prevent injury or product damage:

• WARNING: Risk of electric shock. Disconnect power before installation or servicing.
• Do not use with dimmers. This bulb is non-dimmable.
• Ensure the fixture is rated for the bulb's voltage (120V).
• Do not use in totally enclosed luminaires unless the fixture is specifically designed for LED bulbs.
• Avoid touching the bulb when it is operating or immediately after turning it off, as it may be hot.
• Do not disassemble the bulb. There are no user-serviceable parts inside.
• Dispose of bulbs according to local regulations.

4. Setup and Installation

Follow these steps for proper installation:

1. Turn off power: Before replacing any bulb, ensure the power to the fixture is turned off at the circuit breaker or fuse box.
2. Allow cooling: If replacing an old incandescent bulb, allow it to cool completely before handling.
3. Remove old bulb: Carefully unscrew the existing bulb from the fixture.
4. Install new bulb: Gently screw the Feit Electric LED Mini E11 bulb into the E11 base socket until it is snug. Do not overtighten.
5. Restore power: Turn the power back on at the circuit breaker or fuse box.

This bulb is designed for standard 120-volt E11 mini candelabra base fixtures.

5. Operation

Operating your Feit Electric LED Mini E11 bulb is straightforward:

• Once installed and power is restored, simply use the fixture's switch to turn the light on or off.
• The bulb will illuminate instantly to full brightness.
• As this bulb is non-dimmable, it should not be connected to a dimmer switch. Using it with a dimmer may cause damage to the bulb or the dimmer, and will void the warranty.

6. Maintenance

The Feit Electric LED Mini E11 bulb requires minimal maintenance:

• Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Replacement: This LED bulb has an average life of 9.1 years (based on 3 hours/day). When replacement is necessary, follow the installation steps in Section 4.

7. Troubleshooting

If your Feit Electric LED Mini E11 bulb is not functioning as expected, consider the following:

• Bulb does not light up:
  • Ensure the power switch is in the "ON" position.
  • Check the circuit breaker or fuse for the fixture.
  • Verify the bulb is securely screwed into the socket.
  • Confirm the fixture is receiving power by testing with another working bulb.
• Bulb flickers:
  • Ensure the bulb is not connected to a dimmer switch. This bulb is non-dimmable.
  • Check for loose connections in the fixture or wiring.

If issues persist, contact Feit Electric customer support.

8. Specifications

9. Warranty and Support

This Feit Electric product comes with a warranty. For detailed warranty information or technical support, please refer to the official Feit Electric website or contact their customer service.

You can visit the Feit Electric Store on Amazon for more product information.