Moen 87627

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Moen Haelyn Chrome Single-Handle Pull-Down Sprayer Kitchen Faucet

Model: 87627

Introduction

This instruction manual provides detailed guidance for the installation, operation, and maintenance of your Moen Haelyn Chrome Single-Handle Pull-Down Sprayer Kitchen Faucet. Designed for modern kitchens, this faucet combines style with advanced functionality, including Power Boost technology and a convenient pull-down sprayer. Please read this manual thoroughly before beginning installation or operation to ensure proper function and longevity of your product.

Included Components

Before beginning installation, verify that all components are present:

  • Kitchen Faucet Assembly
  • Soap Dispenser
  • Deck Plate (for 3 or 4-hole installations)
  • Flexible Supply Lines with 3/8" compression fittings
  • Mounting Hardware
  • Instruction Manual (this document)
Moen Haelyn Faucet and Soap Dispenser

Image: The Moen Haelyn Chrome Single-Handle Pull-Down Sprayer Kitchen Faucet with its accompanying soap dispenser.

Setup and Installation

The Moen Haelyn faucet is designed for straightforward installation, suitable for 1, 3, or 4-hole sink configurations. The Duralock quick connect system simplifies the process.

1. Prepare the Sink Area

  • Turn off the water supply to your kitchen sink.
  • Remove any existing faucet and clean the mounting surface thoroughly.
  • Ensure the sink holes are clear and ready for installation.
Sink hole configurations for Moen faucet

Image: Diagram illustrating compatibility with one, two, three, or four-hole sink configurations.

2. Install the Faucet and Deck Plate (if applicable)

  • If using the deck plate for 3 or 4-hole installations, place it over the sink holes.
  • Insert the faucet body through the center hole(s) of the sink or deck plate.
  • Secure the faucet from underneath the sink using the provided mounting hardware. Tighten firmly but do not overtighten.

3. Connect Water Supply Lines

  • Connect the flexible supply lines from the faucet to your hot and cold water supply valves. The lines feature 3/8" compression fittings.
  • Ensure all connections are hand-tight, then use a wrench for a final quarter-turn to prevent leaks.

4. Utilize Duralock Quick Connect System

The Duralock system allows for easy connection of the pull-down hose to the main faucet body without tools.

  • Push the Duralock connector firmly onto the corresponding fitting until you hear a "click."
  • Gently pull on the hose to ensure a secure connection.
Moen Duralock Quick Connect System

Image: A close-up view of the Duralock Quick Connect system, showing how to easily connect the hose without tools.

5. Install Weight on Pull-Down Hose

  • Attach the provided weight to the pull-down hose underneath the sink. This weight ensures the spray head retracts smoothly and docks securely.
  • Adjust the position of the weight to allow for full extension and proper retraction of the spray head.

6. Install Soap Dispenser

  • Insert the soap dispenser body into the designated hole on your sink or countertop.
  • Secure it from underneath with the provided nut.
  • Attach the soap bottle and fill with liquid soap.

7. Test for Leaks

  • Slowly turn on the hot and cold water supply valves.
  • Check all connections for any signs of leaks. Tighten connections as necessary.

Operating Instructions

1. Water Flow and Temperature Control

  • The single-handle design allows for easy control of both water flow and temperature.
  • Move the handle up to increase flow and down to decrease flow.
  • Rotate the handle left for hot water and right for cold water.
Moen Haelyn Faucet in a kitchen setting

Image: The Moen Haelyn faucet installed in a kitchen, demonstrating its aesthetic integration.

2. Pull-Down Sprayer Functionality

  • Grasp the spray head and pull it down from the spout. The flexible hose allows for extended reach within and around the sink.
  • To switch between stream and spray modes, press the button located on the spray head.
  • The Reflex system ensures smooth operation and secure docking of the spray head when released.
User pulling down the Moen faucet spray head

Image: A hand demonstrating the pull-down functionality of the faucet's spray head.

3. Power Boost Technology

  • Activate Power Boost by pressing the dedicated button on the spray head. This feature provides a concentrated stream for faster cleaning and filling.
  • Press the button again to return to normal flow.
Moen Power Boost feature demonstration

Image: An illustration highlighting the Power Boost feature, indicating faster filling and cleaning.

Maintenance and Care

Proper care will ensure the lasting beauty and performance of your Moen Haelyn faucet.

  • Cleaning: Clean the faucet regularly with a soft, damp cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the chrome finish.
  • Aerator Maintenance: If water flow decreases, the aerator (at the tip of the spray head) may be clogged. Unscrew the aerator, rinse it under running water to remove debris, and reattach.
  • Hose Weight Adjustment: If the pull-down spray head does not retract fully, check the position of the hose weight underneath the sink and adjust as needed.
Moen faucet certified to meet U.S. water safety standards

Image: Moen certification for U.S. water safety standards, emphasizing the product's quality.

Troubleshooting

ProblemPossible CauseSolution
Low Water FlowClogged aerator; partially closed supply valves.Clean aerator. Ensure supply valves are fully open.
Spray Head Does Not Retract FullyHose weight is improperly positioned or obstructed.Adjust the position of the hose weight underneath the sink. Clear any obstructions.
Leaks at ConnectionsLoose connections.Carefully tighten all water supply connections. Do not overtighten.
No Water FlowWater supply turned off; clogged supply lines.Ensure main water supply is on. Check for kinks in supply lines.

Specifications

FeatureDetail
BrandMoen
Model NameHaelyn
Model Number87627
Finish TypeChrome
MaterialMetal
Number of Handles1
Hole Count2 (compatible with 1, 3, or 4-hole configurations using deck plate)
Special FeaturePull Down Sprayer, Power Boost
Installation TypeSingle Hole Deck Mount
Maximum Flow Rate1.5 Gallons Per Minute
Spout Height15.94 Inches
Spout Reach8.75 Inches
Hose Length68 Inches
Item Weight5.85 Pounds
Product Dimensions8"D x 10.25"W x 15.93"H
Moen Haelyn Faucet Dimensions

Image: Diagram showing key dimensions of the Moen Haelyn faucet, including spout height and reach.

Warranty and Support

Your Moen Haelyn Kitchen Faucet is backed by Moen's Limited Lifetime Warranty. This warranty covers defects in material and manufacturing workmanship for the original consumer purchaser. For detailed warranty information, claims, or technical support, please visit the official Moen website or contact Moen customer service directly.

For further assistance, please refer to the contact information provided on the official Moen website: www.moen.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.