Product Overview
The QCUQ Water Dental Flosser, Model YXY-801, is a portable oral irrigator designed for effective cleaning of teeth, gums, and braces. It features a removable 300mL reservoir, four distinct cleaning modes, and comes with seven interchangeable tips to cater to various oral hygiene needs. Its rechargeable and waterproof design ensures convenience and durability for both home and travel use.
Package Contents
- 1x Oral Irrigator
- 1x USB Charging Cable
- 1x Quick Start Guide
- 7x Tips (3 Standard, 1 Plaque Brush, 1 Tongue Cleaner, 1 Orthodontic, 1 Periodontal)
- 1x User Manual
- 1x Warranty Card
Specifications
| Feature | Detail |
|---|---|
| Product Name | Oral Irrigator |
| Model | YXY-801 |
| Charging Voltage | DC4.5V - 6.0V |
| Water Spray Pressure | 30-120PSI |
| Pulse Frequency | 1400-1800 r/min |
| Noise | ≤75dB |
| Water Tank Capacity | 300ml |
| Material | ABS |
| Net Weight | 0.59lbs (270g) |
| Gross Weight | 0.90lbs (408g) |
| Waterproof Level | IPX7 |
| Product Size | 3.21 x 2.87 x 11.89 inches (8.15 x 7.3 x 30.2 cm) |
| Package Size | 3.39 x 3.03 x 9.25 inches (8.6 x 7.7 x 23.5 cm) |
Setup
1. Charging the Device
Before first use, fully charge the water flosser. Connect the provided USB charging cable to the charging port located at the bottom of the device. Plug the other end into a compatible USB power adapter (not included) or a computer USB port. The indicator lights will show charging status.
2. Installing a Tip
Select the desired tip from the seven included options. Insert the tip into the hole at the top of the water flosser handle until it clicks securely into place. To remove, press the tip release button (usually located near the tip insertion point) and pull the tip out.
3. Filling the Water Reservoir
Detach the water reservoir from the main body of the flosser by twisting or pulling it down (refer to your quick start guide for specific detachment method). Open the small side opening or the main opening and fill the reservoir with lukewarm water. Ensure the reservoir is securely reattached before use.
Operating Instructions
Power On/Off
Press the power button to turn the device on. Press it again to turn it off. The device will automatically shut off after a period of inactivity to conserve battery.
Selecting a Cleaning Mode
The YXY-801 offers four cleaning modes: Normal, Soft, Pulse, and DIY. Press the 'M' (Mode) button to cycle through the modes. The corresponding indicator light will illuminate.
- Normal: Standard water pressure for daily cleaning. (100-125 PSI)
- Soft: Gentle water pressure for sensitive gums or first-time users. (40-60 PSI)
- Pulse: Pulsating water flow for gum massage and enhanced cleaning. (45-70 PSI)
- DIY: Allows you to customize the water pressure intensity according to your preference. (30-120 PSI)
Using the Water Flosser
Lean over a sink and place the tip in your mouth. Close your lips enough to prevent splashing but allow water to flow from your mouth into the sink. Aim the water jet at the gumline at a 90-degree angle. Move the tip along the gumline, pausing briefly between teeth. Clean both the inside and outside surfaces of your teeth.
Interchangeable Nozzles
The device comes with 7 multi-function nozzles designed for specific cleaning needs:
- Standard Nozzle (x3): For general daily cleaning.
- Interdental Cleaning Head: Designed to clean between teeth and around dental work.
- Tongue Cleaner Head: For fresh breath and removing bacteria from the tongue.
- Periodontal Pocket Tip: For gentle delivery of therapeutic rinses into gum pockets.
- Orthodontic Head: Specifically designed for cleaning around braces and orthodontic appliances.
Maintenance
Cleaning the Reservoir
To prevent mineral deposits and bacterial growth, empty any remaining water after each use. Detach the reservoir and rinse it thoroughly with warm water. For deeper cleaning, the reservoir is removable and can be washed with mild soap and water.
Cleaning the Nozzles
Rinse each tip under running water after use. For optimal hygiene, tips can be soaked in a solution of 2 parts water to 1 part white vinegar for 5-10 minutes once a week to remove mineral buildup.
Storage
Store the water flosser in a cool, dry place away from direct sunlight. Ensure the reservoir is empty and dry before storing. The included travel bag can be used for convenient and hygienic storage, especially when traveling.
Troubleshooting
- No water flow: Ensure the reservoir is filled and securely attached. Check if the tip is properly installed. The water intake tube inside the reservoir should be submerged.
- Weak water pressure: Check the selected cleaning mode; switch to 'Normal' or adjust 'DIY' mode for higher pressure. Ensure the battery is sufficiently charged. Mineral buildup in the tip or internal components can also reduce pressure; clean thoroughly.
- Device not charging: Verify the USB cable is correctly connected to both the device and the power source. Ensure the power source is active. If the issue persists, try a different USB cable or power adapter.
- Unusual noise: A slight humming sound is normal during operation. If the noise is excessively loud or unusual, ensure the reservoir is properly seated and there are no obstructions.
If you encounter issues not listed here or if troubleshooting steps do not resolve the problem, please contact customer support.
Warranty and Support
For detailed warranty information, including coverage period and terms, please refer to the Warranty Card included in your product packaging. For any technical assistance, product inquiries, or support needs, please contact QCUQ customer service through the contact information provided in your Quick Start Guide or on the official QCUQ website. Please have your product model number (YXY-801) and purchase details ready when contacting support.
You can also refer to the official User Manual (PDF) available at https://manuals.plus/m/794c5f0e41b90b5f0b219c9ed5ed9e6c10efd258686e1231d0401eab76cf37a5 for additional information and detailed instructions.
