Oral-B 4210201415190
Contents
Oral-B iO4 Electric Toothbrush User Manual
Model: 4210201415190
Introduction
The Oral-B iO4 electric toothbrush is designed to provide a superior cleaning experience. It combines a dentist-inspired round brush head with micro-vibrating bristles for a professional purifying clean. This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your Oral-B iO4 electric toothbrush.

Image: Oral-B iO4 Electric Toothbrush Duo Pack, showing one black and one white toothbrush with charging bases and a travel case.
Key features include:
- Revolutionary iO Technology: Delivers Oral-B's best clean with gentle micro-vibrations.
- Smart Pressure Sensor: Helps prevent brushing too hard or too softly, protecting gums.
- Four Brushing Modes: Daily Clean, Whitening, Sensitive, and Super Sensitive for personalized brushing.
- Bluetooth Connectivity: Connects to the Oral-B App for post-brushing reports and guidance.
Setup and Initial Use
Charging the Toothbrush
Before first use, fully charge your Oral-B iO4 toothbrush. Place the toothbrush handle on the provided charger. The light ring on the handle will indicate charging status. A full charge typically takes several hours. Ensure the charger is connected to a suitable power outlet (UK 2-pin plug).

Image: Diagram showing the charging station for the Oral-B iO toothbrush and its connection to the Oral-B App for tracking brushing habits.
Attaching the Brush Head
Align the brush head with the shaft of the toothbrush handle and push it down until it clicks into place. To remove, pull the brush head straight off the handle.
Operating Instructions
Brushing Your Teeth
- Wet the brush head and apply a small amount of toothpaste.
- Place the brush head against your teeth at a slight angle towards the gumline.
- Press the power button to turn on the toothbrush.
- Move the brush head slowly from tooth to tooth, allowing the micro-vibrations and oscillating action to clean each surface. There is no need to scrub vigorously.
- Brush each quadrant of your mouth for 30 seconds, ensuring a total brushing time of 2 minutes as recommended by dentists. The built-in timer will signal when to move to the next quadrant and when the 2 minutes are complete.
- After brushing, rinse your mouth and the toothbrush head thoroughly under running water.

Image: Close-up of the Oral-B iO brush head cleaning teeth, illustrating its ability to remove plaque.
Smart Pressure Sensor
The Oral-B iO4 features a Smart Pressure Sensor to guide you in applying the correct pressure:
- Green Light: Indicates optimal brushing pressure.
- Red Light: Signals that you are brushing too hard. Reduce pressure immediately to protect your gums.
- White Light: Indicates that you are brushing too softly. Apply slightly more pressure for an effective clean.

Image: A person using the Oral-B iO toothbrush, with a visual representation of the Smart Pressure Sensor glowing green, indicating perfect pressure.
Brushing Modes
Your Oral-B iO4 toothbrush offers four distinct brushing modes:
- Daily Clean: Standard mode for everyday cleaning.
- Whitening: Designed to polish and remove surface stains.
- Sensitive: Gentle cleaning for sensitive areas.
- Super Sensitive: Extra gentle cleaning for extremely sensitive gums and teeth.
You can switch between modes by pressing the mode button on the handle.

Image: Diagram highlighting the smart features of the Oral-B iO4 toothbrush, including the 4 cleaning modes, 2-minute timer, post-brushing reports, and brush head change alert.
Maintenance
Cleaning Your Toothbrush
- After each use, rinse the brush head thoroughly under running water with the handle switched on.
- Remove the brush head and rinse both the brush head and the handle separately.
- Wipe the handle with a damp cloth. Do not immerse the handle in water.
- Clean the charger regularly with a damp cloth. Ensure it is unplugged before cleaning.
Brush Head Replacement
For optimal cleaning performance and hygiene, replace your Oral-B iO toothbrush head every 3 months, or sooner if the bristles are splayed or worn. The toothbrush may also provide an alert when it's time to change the brush head.
Troubleshooting
If you encounter issues with your Oral-B iO4 toothbrush, refer to the common problems and solutions below:
| Problem | Possible Cause | Solution |
|---|---|---|
| Toothbrush not charging or holding charge. |
|
|
| Toothbrush stops working unexpectedly. |
|
|
| Smart Pressure Sensor always shows red or white. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Brand | Oral-B |
| Model Number | 4210201415190 |
| Power Source | Corded Electric |
| Brushing Modes | 4 (Daily Clean, Whitening, Sensitive, Super Sensitive) |
| Special Features | Travel Size, Pressure Sensor, Bluetooth Connectivity |
| Toothbrush Head Shape | Round |
| Age Range Description | Adult |
| Package Dimensions | 24.7 x 16.9 x 9.9 cm |
| Item Weight | 750 g |
| Manufacturer | Procter & Gamble |
Warranty and Support
Oral-B products are manufactured to high quality standards. While specific warranty details should be confirmed with your retailer or Oral-B directly, electric toothbrushes typically come with a manufacturer's warranty, often for two years, covering defects in materials and workmanship.
For technical support, warranty claims, or further assistance, please visit the official Oral-B website or contact their customer service department. Keep your proof of purchase for any warranty-related inquiries.
Online Support: www.oralb.co.uk
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.