HTC HS01 Bluetooth Neckband Headphones User Manual

1. Safety Information

Please read all safety instructions carefully before using this product. Failure to follow these instructions may result in injury or damage.

• Do not expose the headphones to extreme temperatures or direct sunlight.
• Avoid dropping or subjecting the headphones to strong impacts.
• Keep the headphones away from water and moisture, except for the IPX5 water-resistant rating which protects against splashes and sweat. Do not submerge.
• Do not attempt to disassemble or modify the headphones.
• Use only the provided charging cable or a certified equivalent.
• Prolonged listening at high volume levels may cause hearing damage. Adjust volume to a safe level.

2. Package Contents

Verify that all items are present in your package:

• 1x HTC Wireless Neckband Headphone
• 1x USB-C Charging Cable
• 2 Pairs of Rubber Eartips (S/L)

3. Product Overview

Familiarize yourself with the components of your HTC HS01 Neckband Headphones.

Figure 3.1: HTC HS01 Bluetooth Neckband Headphones. This image displays the overall design of the neckband headphones, featuring the flexible neckband, integrated earbuds, and control modules.

Figure 3.2: Control Panel and Charging Port. This image highlights the control buttons on the neckband, including the ANC button, Volume Up/Down, Power/Multi-function button, and the Type-C charging port, along with the microphone location.

Figure 3.3: Magnetic Earbud Functionality. This image illustrates how the earbuds magnetically connect, indicating the auto-pause feature when merged and continuous play when separated.

4. Setup

4.1 Charging the Headphones

Before first use, fully charge your headphones.

1. Locate the Type-C charging port on the control module (refer to Figure 3.2).
2. Gently open the protective cover of the charging port.
3. Connect the USB-C charging cable to the port and the other end to a USB power source (e.g., wall adapter, computer USB port).
4. The LED indicator will illuminate during charging and turn off or change color when fully charged.
5. A full charge takes approximately 1.5 hours.

4.2 Bluetooth Pairing

Pair your headphones with your device for wireless audio.

1. Ensure the headphones are turned off.
2. Press and hold the Power/Multi-function button until the LED indicator flashes red and blue alternately, indicating pairing mode.
3. On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
4. Select "HTC HS01" from the list of found devices.
5. Once connected, the LED indicator will flash blue slowly or turn solid blue.
6. The headphones will automatically reconnect to the last paired device when powered on, if the device's Bluetooth is active and within range.

5. Operating Instructions

5.1 Basic Controls

• Power On: Press and hold the Power/Multi-function button for 3 seconds.
• Power Off: Press and hold the Power/Multi-function button for 5 seconds.
• Play/Pause: Short press the Power/Multi-function button.
• Volume Up: Short press the "+" button.
• Volume Down: Short press the "-" button.
• Next Track: Long press the "+" button.
• Previous Track: Long press the "-" button.

5.2 Active Noise Cancellation (ANC)

The ANC feature reduces ambient noise for a more immersive listening experience.

• Activate ANC: Short press the ANC button (refer to Figure 3.2). An audible prompt will confirm activation.
• Deactivate ANC: Short press the ANC button again.

5.3 Game Mode (40ms Ultra-Low Latency)

Enhance your gaming experience with reduced audio delay.

• Activate Game Mode: Press and hold the Power/Multi-function button for 2 seconds. An audible prompt will confirm activation.
• Deactivate Game Mode: Press and hold the Power/Multi-function button for 2 seconds again.

5.4 Call Management

• Answer/End Call: Short press the Power/Multi-function button.
• Reject Call: Press and hold the Power/Multi-function button for 2 seconds.
• Voice Assistant: Double-press the Power/Multi-function button to activate your device's voice assistant.

5.5 Magnetic Auto-Pause

The earbuds feature a magnetic sensor for convenient control.

• When the two earbuds are magnetically connected (merged), audio playback will automatically pause to conserve power.
• When the earbuds are separated, you can resume playback by pressing the Play button.

6. Maintenance

6.1 Cleaning

• Wipe the headphones with a soft, dry, lint-free cloth.
• For stubborn dirt, slightly dampen the cloth with water. Do not use harsh chemicals or abrasive cleaners.
• Regularly clean the eartips and earbud mesh to prevent wax buildup and maintain sound quality.

6.2 Storage

• Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures.
• Avoid tangling the neckband and cables.

7. Troubleshooting

If you encounter issues, refer to the following common solutions:

8. Specifications

9. Warranty and Support

HTC provides a 360-day warranty extension for this product. For any inquiries, technical support, or warranty claims, please contact HTC customer service. Refer to your purchase documentation for specific contact details or visit the official HTC website for support information.

We are committed to ensuring your satisfaction with HTC products.