HTC NE35 Earphones User Manual
Components
The earphones and charging case consist of the following parts:
- Touchpad: The touch-sensitive area on the earphone used for controls.
- Earphone LED: An indicator light on each earphone.
- Charging contact: The metal points on the earphone that connect to the charging case.
- Earphone speaker: The component that produces sound.
- Charging case LED: An indicator light on the charging case.
- USB Type-C port: The port on the charging case for power input.
Getting Started
Take out and pair the earphones
If you are using the earphones for the first time, remove both from the charging case. The LED on one earphone will blink red and blue alternately, indicating that they are in pairing mode.
Note:
- If the earphones have not been paired with each other, they will automatically enter pairing mode when turned on. You will hear two beeps when pairing is successful.
- If the earphones have been paired before, they will automatically reconnect to each other when turned on. You will hear a beep when they connect.
Power on and off
Power on:
- Taking the earphones out of the charging case will automatically turn them on.
- To manually turn on each earphone, press and hold the touchpad for three seconds [3s].
Power off:
- Placing the earphones in the charging case will automatically turn them off.
- To manually turn off each earphone, press and hold the touchpad for five seconds [5s].
Note: If the earphones are not paired with a Bluetooth device within three minutes after powering on, they will automatically power off. They will also power off after three minutes if the paired Bluetooth device moves out of the effective connection range and has not reconnected.
Basic Operations
Controls
Power: Manual power on/off: Press and hold touchpad for 3 seconds [3s] (on) or 5 seconds [5s] (off).
Phone Mode: Answer/End call: Tap earphone once [x1].
Music Mode:
- Play/Pause: Tap earphone twice [x2].
- Next Track: Tap earphone thrice [x3].
- Previous Track: Tap earphone thrice [x3].
Resetting Earphones
If the earphones fail to pair or reconnect to each other, reset them by tapping both earphones five times simultaneously [x5 x5].
Note: Resetting the earphones will clear the Bluetooth pairing history.
Regulatory and App Information
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- -Reorient or relocate the receiving antenna.
- -Increase the separation between the equipment and receiver.
- -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- -Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
US Representative
Company name: MIRAMONT SOLUTIONS LLC
Company address: 34218 HOURGLASS ST, TEMECULA, CA 92592 United States
FRN: 0036313369
Agent name: Wenyi Wang
Title: CEO
Email: wenyiwang@miramontsolutions.com
Phone: 951 401 3633
SayMi App for AI Translation
A QR code is present in the original document to download the SayMi APP. This application is required to utilize the AI translation function of the earphones.
