Homemory HXDYKL456-HUI

Homemory Flickering Flameless Candles with Remote Instruction Manual

Model: HXDYKL456-HUI

Introduction

Thank you for choosing Homemory Flickering Flameless Candles with Remote. This set of three candles features embedded string lights within a cylinder vase design, offering a cool and elegant appearance. They are battery-operated, include a remote control with 8 light modes, and a timer function for convenient use. This manual provides essential information for setup, operation, and maintenance to ensure optimal performance and safety.

What's in the Box

  • 3 x Homemory Flickering Flameless Candles (Gray)
  • 1 x Remote Control

Setup

Battery Installation

  1. Locate the battery compartment at the bottom of each flameless candle.
  2. Open the battery cover.
  3. Insert 3 AAA batteries (not included) into each candle, ensuring correct polarity (+/-).
  4. Close the battery cover securely.
Image showing hands installing AAA batteries into the base of a Homemory flameless candle.
Figure 1: Battery installation for the flameless candles. Each candle requires 3 AAA batteries.

Remote Control Battery

The remote control comes with a pre-installed button cell battery. Remove the plastic tab from the battery compartment before first use.

WARNING: Button cell battery included. Keep out of reach of children. Do not swallow or place it inside any part of the body. Swallowing may lead to serious injury or death. Seek medical attention immediately if you suspect the battery has been swallowed or placed inside any part of the body.

Operating Instructions

Powering On/Off

  • Manual On/Off: Each candle has a switch on its bottom. Turn the switch to the 'ON' position to activate the candle. Turn to 'OFF' to deactivate.
  • Remote Control: Use the 'ON' and 'OFF' buttons on the remote control to power the candles. Ensure the remote is pointed towards the candles for effective operation.
Image showing three Homemory flameless candles with embedded string lights glowing, set up as home decor.
Figure 2: Homemory flameless candles illuminated, showcasing their elegant design.

Remote Control Functions

The included remote control allows for convenient operation of your flameless candles. Ensure the remote has a clear line of sight to the candles.

Image showing the remote control for Homemory flameless candles with various buttons for modes, timer, and brightness.
Figure 3: Remote control for the flameless candles, detailing its functions.
  • ON/OFF: Turns all connected candles on or off.
  • TIMER: Activates the 6-hour timer function. Once set, the candles will stay on for 6 hours and then turn off for 18 hours, repeating the cycle daily.
  • MODE (1-8): Selects one of 8 distinct lighting modes:
    • 1. Combination
    • 2. In Wave
    • 3. Sequential
    • 4. Slo Glo
    • 5. Chasing/Flash
    • 6. Slow Fade
    • 7. Twinkle/Flash
    • 8. Steady On
  • DIM +/-: Adjusts the brightness level of the lights.
Image showing a Homemory flameless candle on a bedside table with text indicating 'Timer Setting: 6 hrs on - 18 hrs off'.
Figure 4: The timer function allows for automatic operation, turning off after 6 hours and resuming 18 hours later.

Official Product Videos

Video 1: Demonstrates the various light modes and remote control functionality of the Homemory Flameless Candles, set in a Halloween theme.

Video 2: Showcases the Homemory Glass Flameless Candle with String Lights in various home settings, highlighting its decorative appeal and light effects.

Maintenance

Cleaning

Wipe the exterior of the candles with a soft, dry cloth. Do not use abrasive cleaners or immerse the candles in water, as they are not designed for full submersion.

Battery Replacement

When the lights dim or stop working, it's time to replace the batteries. Follow the battery installation steps outlined in the 'Setup' section. For the remote control, replace the button cell battery when its range or responsiveness decreases.

Troubleshooting

  • Candles not turning on: Check if the AAA batteries are correctly installed and not depleted. Ensure the switch on the bottom of the candle is in the 'ON' position.
  • Remote control not working: Verify that the remote's button cell battery is functional and the plastic tab has been removed. Ensure you are within effective range and have a clear line of sight to the candles.
  • Inconsistent light modes or flickering: This may indicate low battery power in the candles or the remote. Replace batteries as needed.

Specifications

FeatureDetail
BrandHomemory
Model NumberHXDYKL456-HUI
ColorGray
Material TypeCrystal, Glass, Metal, Copper
Product Dimensions3"D x 3"W x 6"H
Light Source TypeLED
Power SourceBattery Powered (3 AAA per candle)
Voltage5 Volts
Wattage5 watts
Number of Light Sources100
Control MethodRemote Control (IR)
Additional Features8 Mode Lights, Remote, Timer
Water Resistance LevelWaterproof (lights only, do not soak candle holder)

Safety Information

  • This product is for indoor use only.
  • Do not expose the candle bases to excessive moisture or immerse them in water. The string lights are waterproof, but the battery compartment is not.
  • Always ensure batteries are inserted with correct polarity.
  • Remove batteries if the product is not used for an extended period to prevent leakage.
  • Dispose of used batteries responsibly according to local regulations.
  • Keep the remote control and its button cell battery away from children.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.