AtGames Arcade Control Panel (Model HAA290) Instruction Manual

1. Introduction

The AtGames Arcade Control Panel is designed as a direct drop-in upgrade for the Legends Pinball (HA8819, HA8820 series) arcade machine. This accessory enhances your Legends Pinball experience by integrating arcade-quality joystick and trackball controls, expanding its functionality for a wider range of arcade and console gaming.

This manual provides essential information for the proper installation, operation, and maintenance of your Arcade Control Panel. Please read it thoroughly before use.

2. Safety Information

Please observe the following safety guidelines to ensure safe operation and prevent damage to the product or injury:

• Keep the control panel away from water or excessive moisture.
• Avoid exposing the unit to direct sunlight or extreme temperatures.
• Do not attempt to disassemble or modify the control panel. This may void the warranty and cause damage.
• Ensure the Legends Pinball machine is powered off and unplugged before installation.
• Handle with care to avoid dropping or impacting the unit.

3. Package Contents

Verify that all items are present in the package:

• Arcade Control Panel with Joystick and Trackball

4. Setup and Installation

The Arcade Control Panel is designed for easy, plug-and-play installation into your Legends Pinball machine. Follow these steps:

1. Power Off: Ensure your Legends Pinball machine is completely powered off and unplugged from the electrical outlet.
2. Locate Slot: Identify the designated slot on your Legends Pinball machine where the control panel will be installed. This is typically at the front, above the main control buttons.
3. Insert Control Panel: Carefully align the Arcade Control Panel with the slot and gently lower it into place. The design allows for a secure, drop-in fit.
4. Connect Cables: Connect any necessary cables from the control panel to the Legends Pinball machine. The system is designed for plug-and-play functionality, so connections should be straightforward.
5. Secure (if applicable): If your Legends Pinball machine or the control panel includes screws or latches for securing, ensure these are fastened to prevent movement during use.
6. Power On: Once the control panel is securely installed, plug in and power on your Legends Pinball machine. The system should automatically detect the new control panel.

5. Operating Instructions

Once installed, the Arcade Control Panel provides enhanced input for your Legends Pinball machine, enabling a broader range of gaming experiences.

• Joystick: Use the 8-way joystick for directional control in arcade games.
• Action Buttons: The array of buttons (typically labeled A, B, C, X, Y, Z, etc.) are used for various in-game actions, depending on the specific game being played.
• Trackball: The trackball provides precise cursor control or specific game mechanics that utilize rolling input.
• System Integration: The control panel fully integrates with the Legends Arcade Platform, allowing access to its entire range of gameplay features and compatible titles.

Refer to the specific game instructions or the Legends Pinball machine's main manual for detailed control schemes for individual games.

6. Maintenance

To ensure the longevity and optimal performance of your Arcade Control Panel, follow these simple maintenance guidelines:

• Cleaning: Use a soft, dry cloth to wipe down the surface of the control panel. For stubborn smudges, a slightly damp cloth with mild soap can be used, followed by immediate drying. Avoid abrasive cleaners or solvents.
• Dust Prevention: Keep the control panel covered when not in use to prevent dust accumulation, especially around the joystick and trackball mechanisms.
• Trackball Cleaning: If the trackball's movement becomes sluggish, gently remove the trackball (if designed for user removal) and clean any dust or debris from its rollers and housing with a cotton swab.

7. Troubleshooting

If you encounter issues with your Arcade Control Panel, try the following troubleshooting steps:

• No Response:
  • Ensure the Legends Pinball machine is powered on.
  • Verify that the control panel is correctly seated in its slot and all connections are secure.
  • Try restarting the Legends Pinball machine.
• Buttons/Joystick/Trackball Not Working:
  • Check for any physical obstructions.
  • Ensure the game you are playing supports the specific input (e.g., not all games use the trackball).
  • If only specific buttons are unresponsive, inspect for debris or damage.
• Haptic Feedback Issues (if applicable): Some users report issues with haptic feedback. If you experience excessive buzzing or rattling, ensure the control panel is firmly seated and consider consulting online communities or the manufacturer for potential solutions or adjustments.

If problems persist after attempting these steps, please contact customer support.

8. Specifications

9. Warranty and Support

For warranty information and technical support, please refer to the official AtGames website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

AtGames Official Website: www.atgames.net