1. Introduction
Thank you for choosing the NEO TOOLS USB C Rechargeable Flashlight. This high-performance flashlight features a powerful SST40 LED, offering up to 1500 lumens of brightness and a 200-meter range. Its durable aluminum casing and IPX4 water resistance make it suitable for various applications, providing reliable illumination when you need it most.
2. Safety Information
- Do not look directly into the LED light. High intensity light can cause temporary vision impairment or permanent eye damage.
- Keep out of reach of children. This product is not a toy.
- Do not disassemble the flashlight or attempt to modify its internal components. This will void the warranty and may cause damage or injury.
- Use only the provided USB-C cable for charging. Using incompatible chargers may damage the battery or the device.
- Avoid exposing the flashlight to extreme temperatures (above 60°C / 140°F or below -10°C / 14°F) or direct sunlight for prolonged periods.
- Dispose of the battery responsibly according to local regulations. Do not incinerate or expose to fire.
3. Package Contents
Ensure all items are present in the package:
- NEO TOOLS USB C Rechargeable Flashlight (Model 99-075)
- USB-C Charging Cable
- User Manual
4. Product Overview
Familiarize yourself with the components of your flashlight:
A detailed view of the NEO TOOLS flashlight, highlighting its robust aluminum construction, textured grip, and the central control button.
This image illustrates the compact size of the flashlight, measuring 128 mm in length and 30 mm in diameter, making it easy to handle and carry.
A close-up shot of the USB-C charging port, located on the side of the flashlight and covered by a protective rubber flap to ensure IPX4 water resistance.
5. Setup
5.1 Initial Charge
Before first use, fully charge the flashlight to ensure optimal performance.
- Locate the USB-C charging port on the side of the flashlight, usually protected by a rubber cover.
- Gently open the rubber cover to expose the port.
- Connect the provided USB-C cable to the flashlight's port.
- Connect the other end of the USB-C cable to a compatible USB power source (e.g., computer, wall adapter).
- The battery indicator will illuminate to show the charging status.
- Charging time is approximately 5 hours for a full charge.
- Once fully charged, disconnect the cable and securely close the rubber cover to maintain IPX4 water resistance.
The included USB-C charging cable, essential for recharging the flashlight's internal battery.
A graphic representation indicating a charging time of 4 hours and a battery indicator system, typically showing charge status through colored lights (red for low, green for charged).
6. Operating Instructions
6.1 Power On/Off
Press the power button located on the side of the flashlight to turn it on or off.
6.2 Brightness Modes
The flashlight offers multiple brightness levels. With the flashlight on, press the power button repeatedly to cycle through the modes:
- 1500 lm (High): Maximum brightness for extensive illumination.
- 900 lm (Medium): Balanced brightness for general use.
- 350 lm (Low): Reduced brightness for longer runtime or close-range tasks.
- 200 lm (Eco): Lowest brightness for extended battery life.
6.3 SOS Function
To activate the SOS function, typically a long press or double-press of the power button (refer to specific button sequence for your model) will engage this emergency signal mode, emitting a flashing light pattern.
6.4 Battery Indicator
The integrated battery indicator provides information on the remaining battery life:
- Green light: Sufficient charge.
- Red light: Low battery, requires charging.
This graphic details the expected operating duration for each brightness setting: 2.5 hours at 1500 lumens, 3 hours at 900 lumens, 7 hours at 350 lumens, and 9 hours at 200 lumens.
7. Maintenance
- Keep the flashlight clean and dry. Wipe with a soft, damp cloth.
- Do not use abrasive cleaners, harsh chemicals, or solvents, as these may damage the finish or internal components.
- Regularly check the USB-C port cover for proper sealing to maintain its IPX4 water resistance. Ensure it is fully closed after charging.
- Store the flashlight in a cool, dry place when not in use for extended periods.
- Recharge the battery every 3-6 months if stored to prolong battery life and prevent deep discharge.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flashlight does not turn on | Low battery | Charge the battery fully as per the 'Initial Charge' instructions. |
| Flashlight does not turn on | Faulty battery or internal issue | If charging does not resolve the issue, contact customer support for assistance. |
| Light output is dim | Low battery | Charge the battery fully. Dim light is often an indicator of low power. |
| Charging not working | Cable not properly connected | Ensure the USB-C cable is securely connected to both the flashlight and the power source. Check the port for obstructions. |
| Charging not working | Faulty cable or power source | Try a different USB-C cable or a different USB power source to rule out external issues. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | NEO TOOLS |
| Model | 99-075 |
| Light Source | SST40 LED |
| Luminous Flux | 1500 lumens (max) |
| Power | 10 W |
| Range | 200 m |
| Battery | 3.7V 4000 mAh Li-ion |
| Charging Time | Approximately 5 hours |
| Material | Aluminum |
| Water Resistance | IPX4 |
| Special Features | Rechargeable, SOS function, Pocket Clip |
| Manufacturer | Grupa Topex |
10. Warranty and Support
For warranty information or technical support, please refer to the warranty card included with your product or visit the official NEO TOOLS website. Keep your purchase receipt for all warranty claims.
Manufacturer: Grupa Topex
Model Number: 99-075