1. Introduction
Thank you for choosing the DAN Technology Electric Hot Comb. This device is designed to provide efficient and effective hair straightening for wigs, natural hair roots, and curly hair. Featuring advanced PTC heating technology, ceramic glaze tourmaline infusion, and dual voltage capability, it offers a versatile styling solution for home and travel use. Please read this manual thoroughly before use to ensure safe and optimal performance.
2. Safety Information
WARNING: Keep out of reach of children. This appliance has hot surfaces. Always use with caution to prevent burns.
- Do not use this appliance near water, such as bathtubs, showers, basins, or other vessels containing water.
- Always unplug the appliance immediately after use.
- Do not place or store the appliance where it can fall or be pulled into a tub or sink.
- If the appliance falls into water, do not reach for it. Unplug it immediately.
- Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged.
- Keep the cord away from heated surfaces.
- Do not wrap the cord around the appliance.
- Allow the appliance to cool completely before storing.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
3. Product Features
- Portable Size: Small and lightweight design for easy storage and travel.
- Healthy and Silky Hair: Keratin and ceramic glaze tourmaline infused comb teeth reduce static and frizz, releasing negative ions for smoother, softer, and shinier hair.
- PTC Heating Technology: Ensures even heat distribution and rapid heating within 30 seconds.
- High and Low Switch: Offers two temperature settings (430°F and 450°F) suitable for various hair thicknesses and types.
- Dual Voltage: Compatible with 100-240V, making it ideal for international travel.
- 360° Swivel Cord: Provides flexibility and prevents tangling during use.
- Anti-scald Bracket: Integrated bracket for safe placement during and after use.
Image 1: The DAN Technology Electric Hot Comb in gold, showcasing its compact design.
Image 2: Close-up of the hot comb teeth, highlighting the Argan oil, keratin, and tourmaline infusion for reduced hair damage and frizz.
Image 3: Diagram illustrating the rapid and consistent heating provided by PTC technology, reaching 450°F quickly.
Image 4: The hot comb in action, demonstrating its versatility for straightening hair roots, wigs, and curls.
4. Setup
- Unpack the DAN Technology Electric Hot Comb and ensure all components are present and undamaged.
- Place the hot comb on a heat-resistant surface, utilizing the integrated anti-scald bracket.
- Ensure your hands and the area around the comb are dry before plugging in the device.
- Plug the hot comb into an appropriate electrical outlet. The dual voltage feature (100-240V) allows for use in various regions without a voltage converter, but an adapter may be needed for different plug types.
5. Operating Instructions
- After plugging in, select the desired temperature setting using the high and low switch. The low setting is approximately 430°F, and the high setting is approximately 450°F.
- Allow the comb to heat up for approximately 30 seconds. The indicator light will illuminate when the device is powered on and heating.
- Before use, ensure hair is clean and dry. For best results and protection, apply a heat protectant spray.
- Gently brush hair with the heated comb, starting from the roots and moving towards the ends. Work in small sections for thorough straightening.
- Be cautious to avoid direct contact with the scalp or skin to prevent burns.
- After styling, switch the device to the 'OFF' position and unplug it from the outlet.
- Allow the hot comb to cool completely on a heat-resistant surface before storing.
6. Maintenance
- Always ensure the hot comb is unplugged and completely cool before cleaning.
- Wipe the ceramic comb teeth and handle with a soft, damp cloth. Do not use abrasive cleaners or harsh chemicals.
- Do not immerse the appliance in water or any other liquid.
- Regularly check the power cord for any signs of damage. If the cord is damaged, discontinue use immediately and contact customer support.
- Store the hot comb in a dry, safe place away from moisture and extreme temperatures.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Comb does not heat up. | Not plugged in correctly; Power outlet issue; Device malfunction. | Ensure the comb is securely plugged into a working outlet. Check the power switch. If still not working, contact customer support. |
| Comb heats slowly or inconsistently. | Insufficient power; Device malfunction. | Ensure the power outlet is providing adequate power. Allow the full 30 seconds for heating. If issues persist, contact customer support. |
| Hair is not straightening effectively. | Incorrect temperature setting; Hair section too large; Hair is not dry. | Increase temperature if hair type requires it. Work with smaller, thinner sections of hair. Ensure hair is completely dry before use. |
| Burning smell during use. | Product residue on comb; Hair product burning; Device malfunction. | Unplug and allow to cool. Clean the comb thoroughly. Ensure hair is free of excessive product. If the smell persists, discontinue use and contact customer support. |
8. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 10 x 3.5 x 3.5 inches |
| Item Weight | 6.4 ounces |
| Model Number | CP05C1P |
| Manufacturer | DAN Technology |
| Power Source | Corded Electric |
| Max Temperature Setting | 450 °F |
| Material Type | Ceramic |
| Heater Surface Material | Ceramic |
| Hair Type Compatibility | All |
| Voltage | Dual Voltage (100-240V) |
9. Warranty and Support
DAN Technology is committed to providing high-quality products. Your Electric Hot Comb is covered by a warranty that includes a 6-month replacement or return policy from the date of purchase. This policy applies even if the standard Amazon return window has closed.
For any questions, concerns, or support needs, please do not hesitate to contact DAN Customer Care. We aim to respond to inquiries via Amazon Messenger within 24 hours and offer live product assistance chat for immediate support.
You can reach our customer support team through the Amazon platform or by visiting the official DAN Technology store page.